Database Info

After wrong Rom update no Bootmenu MDA Compact 2

Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!

I Have the same problem
My sad story is…..
I purchased MDA Compact II a month ago. I changed its ROM with JAMin’s ROM (after unlocking with LOKIWIZ). The device was OK but camera was not working, so I updated it again with K JAM’s ROM process started 10% to100% as usual & massage appeared congratulation your device is updated successfully. The process was also running on my device as usual. But after that my device (I mean MDA Compact II) refused to start normally it just blinks LED & so LCD. (It is dead now) The PC doesn’t detect it no boot loader is available to update it with its original ROM that I got now. So if you find any thing plz help me & if I get any thing I promise I'll inform you my email adres is [email protected] plz mail me to have your email adress to comunicate
bye
azhar

Re: I Have the same problem
azhar63 said:
I changed its ROM with JAMin’s ROM
Click to expand...
Click to collapse
Why? :?

jun36 said:
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
Click to expand...
Click to collapse
if you say you can get into the bootloader with the AC cable then you should beable to download a SD card image on to the phone.

When plugged in it is not bootloader. Same thing happened to me and i tried the sd image rom. The screen looks like the bootloader but it is not. There are 3 colors and no mention of serial 1.x or whatever it is. I am going to send my unit in 4 repair. Look in the prophet forums there are 2 threads. One is titled upgraded prophet with wizard rom and the other thread is Can anyone help fix my brick. If anyone knows a fix it would be great but I think it has to be repaired by disributor.

Try this
Plz try this link u may fine something http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard

Bootloader start and after power off

I've made these operations on my G4 prophet:
after to have CID unlocked the phone, I've tried to install an official italian ROM (a very good choice ), but I've trusted the man that sold me the phone.
Now powering on the phone normally, it shows the splash screen (HTC innovation) and after it power off
if start in bootloader mode (CAMERA + POWER) it shows the three colour display and IPL and SPL version (both 2.18.0001 )and after about 1 second, before to show USB enabling, it power off;
if I try an hard reset (CAMERA + COMM + POWER) it has same behaviour like in bootloader mode;
if I connect USB cable, it resets continuosly ...
Can somebody help me?

how are you cid unlocked? with a buyed tool? or some free issue?

I've cid unlocked the phone with an IMEI based paid tool

Anything to suggest? Thank you.

I don't know if I can resume my prophet so ...
do you have a sd image rom backup (complete of IPL and SPL) for G4 model or do you know where to download it ?
Thank you very much.

have you,charged the phone 100%?I mean with the normal charger,not usb.... Also download this http://forum.xda-developers.com/attachment.php?attachmentid=41869&d=1182254462
(a collection of G4 IPLs,and try to flash 2.20.0001)

Hi tonydeli7,
first thing, thank you for your help,
I will try this evening the suggested solution, but the problem is that I can't access the phone via usb.
I've erroneously upgraded the prophet (the upgrade process terminated with success) with a k-jam rom without backup before the running rom image on SD.
I'll let you know.

Nothing to do, Ihave full charged the battery phone but I 'm not able to access it via USB so that I cannot execute any upgrade by this way. Nobody has a G4 backup available on SD to try the restore?
Thank you.

I've read better the Jesterz topic about Gold Card project and I've found this other one http://forum.xda-developers.com/showthread.php?t=292667
that seems to be same problem of my phone. I'll let you know.
Thanks.

My phone is working again . Thanks.

No 3colourscren

my prophet was working normaly and while i was installing a program it stoped. i formated it and reinstalled the windows but what happened is:
1-it doesnt recognize the memory card anymore
I thought it is rom problem , i tried to install anothere rom but THERE IS NO 3 colour screen but the prophet is working
please any body have idea about this problem reply .

have u done hardspl? try flashing another rom..

i tried hardspl but it didnt continue the process
while i was doing hardspl my prophet turnedoff
thank blusilv for reply

where is the help??????????????

Listen up
First off all charge the battery for 2 hours before doing this.
After turn on the device and press for 5 seconds the com button on the left side of the device.
You will enter the 3 colours loader.
Connect the device to the PC.
Step 2 Install the original Rom
Step 3 Do a Rom update use step 2 of pdamobiz Rom, select update rom file and wait.
Step 4 Do a hardspl G3 or G4 see your device to see witch one is it.
Step 5 install a new Rom with the RUU update utility G3 or G4.
Then you just have to wait the device to reboot and you can use it.
Note: Use the 2.19 radio Rom its the most stable, you can install it after installing the final Rom ok.
Any questions feel free ok bye.

i am sorry but i thought the three colour screen meens bootloader my problem now that i cant change this rom as it dont recognize the memory and also there is prblems with bluetooth.
thanx deltav but ineed more help

Listen up that procedure i explained would put the PDA working 100%, if you have the problems you say you do, its because you installed a rom inappropriate for you device. The memory and bluetooth problems come from bad radio rom and from roms that are not suitable for the device, you mad bad installations, that is the real origin for your problems, if you want to stay with your device with problems fine, in my opinion the best is to put the original rom in and after that, do the rest of procedure if you don´t want to this its up to its your device not mine.

i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please

Hello,
Same problem here, no 3-color screen appears when I start or reset and press the comm button on the side.

help for me and seichi please

OK guys after beeing in bootloader mode do a g3 or g4 update with a new rom don´t forget to connect the usb cable correctly, see if it works, if it does not tell me what are your problems, bye.

drdisho said:
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Click to expand...
Click to collapse
Listen did you charge the device for 4 hours first on the electricity - step 1
Do a hard reset with the stylus on the device - step 2
press the left com button for 5 seconds on the device, before anything appears on screen - step3
If everything goes well the 3 colour screen will appear.

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia

Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!

Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......

The same problem, the 2.03TX WWE is a nightmare for me.

I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini

you should flash from bootloader.

I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id

I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...

to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?

hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..

I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful

Hello
I was sucessfull.
There is a 2 step flash!!!
P-O

I try to use this too but nothing no flash ....

Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...

ok this img of error the image 1 when start exe the other when stat update noid

jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723

I use xp ...

well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.

I try more and more but notuhing

Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

My device never worked after installing A ROM!!

hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??

I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.

the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try