my prophet was working normaly and while i was installing a program it stoped. i formated it and reinstalled the windows but what happened is:
1-it doesnt recognize the memory card anymore
I thought it is rom problem , i tried to install anothere rom but THERE IS NO 3 colour screen but the prophet is working
please any body have idea about this problem reply .
have u done hardspl? try flashing another rom..
i tried hardspl but it didnt continue the process
while i was doing hardspl my prophet turnedoff
thank blusilv for reply
where is the help??????????????
Listen up
First off all charge the battery for 2 hours before doing this.
After turn on the device and press for 5 seconds the com button on the left side of the device.
You will enter the 3 colours loader.
Connect the device to the PC.
Step 2 Install the original Rom
Step 3 Do a Rom update use step 2 of pdamobiz Rom, select update rom file and wait.
Step 4 Do a hardspl G3 or G4 see your device to see witch one is it.
Step 5 install a new Rom with the RUU update utility G3 or G4.
Then you just have to wait the device to reboot and you can use it.
Note: Use the 2.19 radio Rom its the most stable, you can install it after installing the final Rom ok.
Any questions feel free ok bye.
i am sorry but i thought the three colour screen meens bootloader my problem now that i cant change this rom as it dont recognize the memory and also there is prblems with bluetooth.
thanx deltav but ineed more help
Listen up that procedure i explained would put the PDA working 100%, if you have the problems you say you do, its because you installed a rom inappropriate for you device. The memory and bluetooth problems come from bad radio rom and from roms that are not suitable for the device, you mad bad installations, that is the real origin for your problems, if you want to stay with your device with problems fine, in my opinion the best is to put the original rom in and after that, do the rest of procedure if you don´t want to this its up to its your device not mine.
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Hello,
Same problem here, no 3-color screen appears when I start or reset and press the comm button on the side.
help for me and seichi please
OK guys after beeing in bootloader mode do a g3 or g4 update with a new rom don´t forget to connect the usb cable correctly, see if it works, if it does not tell me what are your problems, bye.
drdisho said:
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Click to expand...
Click to collapse
Listen did you charge the device for 4 hours first on the electricity - step 1
Do a hard reset with the stylus on the device - step 2
press the left com button for 5 seconds on the device, before anything appears on screen - step3
If everything goes well the 3 colour screen will appear.
Related
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
HI....
for a while I had flashed the German Rom WM 6 to my wizard.
It works and Im happy with it .
But now after a complete power up it starts after a short loading (windows) directly with the password inquiry on the screen. That normaly is displayed after the screen callibration.
And I can´t type in the password and when the wizard says it is wrong.
So I tryed to flash a new image, no chance !!!
The ruu says That is not the right version or error 300 no conection when I start with the boot screen after power up and camera button.
The IPL is 2.21.0001 and
the SPL is 2.G4.4PDA
Maybe there is some help outside here
Thank you
First you identify your wizard
you have a G4 wizard and I believe that u r trying to flash with a G3 rom thats one error i can see.
second most important thing is try to hard reset your device first to come back on the normal situation and then again go through with step by step for CID unlock. which you need to flash your rom then go through with this link which you can find on Wiki also.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
then try once again
hope this solve your wizard probem
I tried to flash the old g4 rom that i have since 5 month
I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help
You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.
Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help
Hmm, can u fully upgrade your rom ?
Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo
I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.
Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723
hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??
I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.
the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try