Hii my friends .. i have Jamin with the Last Origianl rom .. ok .. but after i isnatll some programs .... like live messenger and others .. the device working OK .... but when i try to restart ( soft reset ) my jaine it is getting frezz at logoing windows after light gone .. but to escape this error i must tap on screen te make the light on .. then the mobile getteng start ....
have any one have selution for this annoyed thing....
Make a Hard Reset and install all Apps again.
but that is the hard way and also the longst way .... u know this way will take my all day
no way to make something better than that ....
you doesnt say enough to found your problem ... its like ... A:my computer doesnt work and this is the only answer we get ... sure reset them :->
nothing but
1- hard reset
2- istall all my apllications ..
3- make soft reset ....
4- getting frezz ..
update ur ROM
I have the last Official rom for Jamin
Related
Hi all
I was upgrade my Jasjar by mistake with jam rom, after upgrading my Jasjar didn't work and the screen didn't show any thing (black screen). Please I need help, if any one can solve this problem give me the solution.
Hi!!!
Take it easy.
Trye to see if the device can go to "bootloader" press "camera"+"on/off"+sof reset.
IF you can go to "boot loader", see the wiki in this forum.
Me too have the same problem, but i was enable to fix-it.
Remove the batery form device, until you find the solution, I think tat you can not charge the batery.
(sorry, by not making links, but I am Flashing my Universal)
Good luck
Thank you, my friend
I tried many times to go to boot loader but I can't, any how I am waiting for the solution.
try this . brightness button + power button + soft reset buton (using ur styles ofcourse) lol . then u enter bootloader the hard way i guess. from there connect the usb althou ur active sync may or may not detect the connection . but on ur fone the serial link wud change to USB . then try flashing a shipped rom 1st then . after that do CID unlock (that if u haven done it yet with ur fone). then flash any rom of ur choice
Look in Wiki... there are many methods =) Wiki rules!!
it saved my exec.. =)
i have the same problem and i treid this way it does not go some one told me that to charge the battary by another jasjar but right now i am not able to find one els to charge the battry..
also i did chat with imate support and they advice me to send it to the service center and i don't know what to do.
even wiki does not have a soultion for that.
I think the bootloader is broken and need to be reinstall but how????
of course you've got this bad rom form ce4ara.com right
it's soo bad
well how can the bootloader b fukd man ?? lol anyways here r the two bootloader editions the instructions to which u can find in universal wiki . here is the link ::
http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
well when u connect ur fone in bootloader mode to the pc do u c the "serial" on the top change to "usb" ?? if so go here ::
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
get the mtty utility and do as instructed
ps:: dumb azz customer care knows jus two things if u ask them anything about a screwed jasjar. :: install new shipped rom or get to service centre lol. not any other excusehas added to that list as of yet
aahmed12 said:
of course you've got this bad rom form ce4ara.com right
it's soo bad
Click to expand...
Click to collapse
try stable roms and not beta version to test ur fone efficiency for instance for start install jus shippd rom as they are the most stable with almost no bugs ! so always wen u have a broken jasjar n need to b reconstructed innercorely lol use shipped rom. thats wat i do ales lol
I tried these both links before the problem there is no serial or USB on the screen it's completly black no even when you connect it to usb gives u message on computer unrecoginze device then how to upgrade or reinstall bootloader??
with MTTy says usb device not found frist i have to run bootloader again on my jasjar frist to do what writen in wiki
does ur fone charge up by the wall charger n the charging led turns red? ? mayb ur fone not properly charged or so to even enter bootloader ??
I tried all mouthed but I can't fix it, last tried I toke it to the technician and he said the board was damaged.
Thank you,
Sorry for that but first try to charge you battary by another jasjar it might work
okay man .. if u didnt already solve ur prob
i had that prob b4 & here's the steps i took ( i thought i damaged my chip 2 )
1. disable usb connections in active sync 4 now (or remove it from ur pc)
2. get into boot loader by pressing backlight botton+power botton .. dont press soft reset
3. connect ur USB
4. open the MTTY utility .. download it from the wiki if u dont have it
5. press on USB botton on the right of the MTTY window
6. on the window that appears press (enter) ... a wiered word will appear .. press enter again
7. write task 28 55aa (just write it dont copy or it wont work) and press Enter
8 . write task 28 55aa again and press enter
now u can close the MTTY and setup a new rom on ur device .. just choose a proper 1 from this forums
these instructions worked 4 me & i hope u find it useful if u didnt already solved ur problem
jasjar problem
I completely have the same problem with my jasjar and non of these steps worked with me cuz it wont get in a bootloader
(It wont startup at all)
my problem is not solved yet.
Hello XDA Community !
There is some thing wrong with my Jam ..
i upgraded it with 2.03 TX .. it worked for a while .
Now when i power it on .. i see just the Blue i-mate booting screen .
i stay forever ..
My PPC establish a connection with AvtiveSync normaly .. and i can read it's contents by ActiveSync ...
But..! .. When i do a soft or hard reset .. it goes to bootloader mode always ..
when i try to upgrade room by any nethod .. it doesent work ..
always connection error
evin with jafWM .. connection error!
When i run roomupdate.exe and go to usb command prompt .. i can type task 32 and Enter normally .. but .. when i typr three characters after that .. it hangs for long time .. and nothing happen
i've been tired of this problem ..
Please help me to be able to use my PPC again!
Thanks to all
yoga mat
The Dreadfulness Of Spam.
Hmmm i need a better description of your problem. Have you dissembled your magician recently ? What error it gives you after you try to update the ppc ? Error 114 ?
Check out my post
http://forum.xda-developers.com/showthread.php?t=424259
Hi ! I have an Acer P300 Windows Mobile based device . I have tried to install Android on it ( i was able to install the rom from a device named GeeksPhone ONE which has the same hardware specs. ) , after the installation the screen was on , but all black . After that I've reinstalled my original FW . All went good , only that my phone wasn't reading my SIM CARD and no WI-FI connections ( although I was able to connect with the wifi at a point ).
After a Soft-Reset ( shutdown and startup ) the phone shows the Acer logo with the FW version , and after that the same black screen as with Android .
It might Android damaged my hardware ???
Now my device won't turn on at all .... No vibration on power button , no bootloader , nothing . Please Someone can help me ?? At least some notes ... One reply from you won't hurt !
P.S. Still waiting for some answer !
Now my device won't start at all ... Is completely DEAD !!! ...
If someone will want to answer , I need some help with the battery , I believe that is not charging anymore ! ...
Anybody with the same problem around here ?
lol have your same problem mate xD tell me if u managed to fix this pls
i have a major probleam with the bluetooth of my lg optimus 3d . in start they work all right , then after i put the KING 3D ROM v2.3 , by this forum . after i few days i try to reinstal the buckup , but with no succes , so i used the program of lg to reinstal it , with succes in this time . and here is the probleam , whean i try to turn on the bluetooth , they seems to loading in start , and then they are off , absolutly nothink . i reinstal the rom from lg twice , but the same , iven and with the update the bluetooth do the same , and with this i mean nothink . can you help me to find a solution , because i dont want to send it in the service before im sure that i cant found a solution . and i dont want to send it because , the previus and first time , they had stamp the leter "E" in the up of the screen , but from my luck i had put a plastick screen protection before .
My brother got the same problem with his o3d. His smartphone is a german branded vodafone version, but i debranded it with the stock 2.3.5 fw. Since then when he pushes the bluetooth button the o3d freezes and after a few seconds everything is allright except the bluetooth is not turned on. I tried to solve the problem with a reflash but its still there. A solution would be nice
thanks for the not help of all of you . i know that you have biger probleams than mine , but at least say somethink like , i dont know , or at least i dont care .
i have a major probleam with the bluetooth of my lg optimus 3d . in start they work all right , then after i put the KING 3D ROM v2.3 , by this forum . after i few days i try to reinstal the buckup , but with no succes , so i used the program of lg to reinstal it , with succes in this time . and here is the probleam , whean i try to turn on the bluetooth , they seems to loading in start , and then they are off , absolutly nothink . i reinstal the rom from lg twice , but the same , iven and with the update the bluetooth do the same , and with this i mean nothink . can you help me to find a solution , because i dont want to send it in the service before im sure that i cant found a solution . and i dont want to send it because , the previus and first time , they had stamp the leter "E" in the up of the screen , but from my luck i had put a plastick screen protection before .
Click to expand...
Click to collapse
does it works when go back to stock rom
i tried to return to stock rom , as also and in the last update , but always the same . right now i had send my divece to service , as none can healp me .
hello everyone ,,
i was trying make ROM , then i try to make hardreset after that i open odin and uplaoded Twrp_3.2.3-1_a750_251218, suddenly i found my phone flashing black and TWARP without stopping , i cant enter to Hardreset mood again and still flashing ,