Hi,
I have an Qtek2020 with wm2003 and i want a complete guide from the experts in this forum.
1. How to backup the old ROM (if anything goes wrong)
2. What program do i need to install (Radio version, and so on)?
3. Which wm5 release is good in Sweden?
My setup is this:
Qtek2020
WM2003
BrightPoint
Radio 1.14
Related
Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.
Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?
ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck
where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11
guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....
not working in Qtek S100 any idea????
it works on S100 / jam / mda c
i tried several images with several devices!
good job!
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel
it shows
Rom ve: 1.12.00WWE
Radio Ver:1.12.10
Ext Rom:1.12.186WWE
Which rom should i use to upgade it
and whether it is an O2 or Imate it sshows O2mini but it is telstra branded.
i guess it was assembled or something.
can anybody have an idea about it.
What do want to gain with upgrading? You got the most recent O2/Telstra rom. If you insist use this link to get 1.13 http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade.
It's T-Mobile so write down your voicemail & gprs settings! & backup your current ext-rom.
M
I have here two devices, one (the original) is:
rom 1.88.514.1 PTB
data 02/01/08
radio 1.27.15.21
proto 22.51.88.13H
the other I changed everything
Now, for warranty purposes I need to change it to the original state.
I just dumped the rom from the first one, but don´t know how to get the radio...
any help is welcome!
Have you searched through this sticky? I think your answer can be found here; http://forum.xda-developers.com/showthread.php?t=383904
I try to update my dopod to WM 6 using PDAVIET ROM
But now the device stuck at start up screen..
IPL 2.20
SPL 1. 00.0000
GSM 01.13.20
OS 2.20.7.34
Can anyone tell me what should I do
Thanx
re-flash your PDA with official WM 5 ROM and try antoher WM 6 ROM, you can find it here:
http://forum.xda-developers.com/showthread.php?t=310452
Just follow exact steps!!!
BTW, did you just connect your PDA to PC and start upgrade????