Guys ,
I have a question to the dev's & pro's of this forum as I am having a strange problem.
Now, I bought my device with the following fw version:
1.56.405.5
22.45.88.07
1.27.12.32
It also had an Ext.Rom with some stuff of my operator (Turkcell)
When HTC released the WWE 6.1 upgrade, I couldn't resist and did the trick with the 5th digit and the update became available for me.
I downloaded it and to my surprise I didn't even have to HardSPL my device in order to perform the upgrade, did it successfully and had no problems ever since.
But now HTC has released a ROM update (not 6.1) which IS intended for my device.
Version is:
RUU_Kaiser_HTC_TUR_Turkcell_2.50.480.0_radio_sign_22.51.88.13_1.27.15.32R2_Ship.exe
Now it comes:
I am unable to flash this firmware to my phone and have to HardSPL it first, otherwise it won't work and I get the 'Invalid Vender ID' error.
What do you guys think ?
Has the 6.1 upgrade somehow permanently changed the vender ID of my handset ?
Or what else could the reason be ?
Thanks in Advance for your comments.
Just an FYI, the Kaiser does not have an extended ROM.
You flashed a WWE 6.1 ROM to your device. Your SPL would have been updated along with this. The original "ship" SPL on your device probably allowed WWE ROMs to be flashed in addition to Turkish ROMs. Now that you have a 3.xx SPL from an HTC WWE ROM, it will block the flashing of any non-WWE ROM.
You will need to flash HardSPL if you want to revert to the Turkish WM6 ROM.
RUU_Kaiser_HTC_TUR_Turkcell_2.50.480.0_radio_sign_ 22.51.88.13_1.27.15.32R2_Ship.exe
The TUR indicates the ROM is coded for Turkish devices.
Hello,
thanks for your reply.
That sounds interesting and also makes sense.
Yes, I live in Turkey and bought it directly fm the shop of my operator, but the language of my device was English.
And I'm sure that the Ext Rom was present before the 6.1 upgrade, as I could see it in a separate line in 'Device information'.
And when I skipped the customization (where it says 'It will customize your phone in 5 seconds...') via soft reset right after a hard reset, it didn't load the operator stuff and the ExtRom in Device Information didn't appear.
Well, it seems there is no way back (unless I'd HardSPL it first).
I'm stuck with WWE, which actually isn't an issue for me.
My only concern is that I would like to flash the original ROM back in case I would have to make to use of my warranty or if I should consider selling it within the warranty period.
It's weird that your device would show anything related to an extended ROM because I remember the discussion at the Kaiser's launch back in September, and it definitely does not have one.
As far as reverting for warranty, if you ever need to do so, there is a thread with a very detailed step-by-step process explaining how to. In your case you would need to flash HardSPL, and then start following the guide.
My TyTN II had an Ext Rom.
Maybe they have introduced it in later batches or only for certain regions.
Here is the content of the PP_ExtVer.xml file I had in this firmware:
- <wap-provisioningdoc>
- <characteristic type="Registry">
- <characteristic type="HKLM\SOFTWARE\OEM" translation="filesystem">
<parm name="ExtROMVersion" datatype="string" value="1.56.408.8601" translation="filesystem" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
And yes, I have already studied that thread, but since I would have to flash it to HardSPL first, it wouldn't set my device 100% back to its original state.
Maybe if I could find my original SPL and flash this one to my device first, I might have the chance to flash a/m 6.0 ROM update on top of it, but unfo I haven't backed up my ROM, nor is it available anywhere.
Well, I guess I have to live with it
Like I said in my last post:
You will have to flash HardSPL at first, but then you can follow the instructions to load your original carrier ROM and your original SPL.
It's a very simple process.
NotATreoFan said:
Like I said in my last post:
You will have to flash HardSPL at first, but then you can follow the instructions to load your original carrier ROM and your original SPL.
It's a very simple process.
Click to expand...
Click to collapse
hi mate..
do u know where can i find this ROM pls?
RUU_Kaiser_HTC_TUR_Turkcell_2.50.480.0_radio_sign_ 22.51.88.13_1.27.15.32R2_Ship.exe
thank u!
http://www.turkcell.com.tr/download..._radio_sign_22.51.88.13_1.27.15.32R2_Ship.zip
Related
I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.
Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.
okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan
Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan
Hi my name is Kostas i'm from Greece and i have a touch pro.i need some answers so i can do some update at my rom from 6 to 6.5.i found i rom that i like but i have some questions.
1.What CDMA is and what GSM,what is the difference and how i know which one i own.
2.To update to another rom i have to Hard SPL my phone?and what is this?do i hve to unlock something?
3.If i flash my touch pro can i install the Greek Language?
4.The rom i found is this
Code:
http://forum.xda-developers.com/showthread.php?t=511146
, is it good?which one should i download from this one,the Regular or the MSVC?
Thank for any answer in advance please help me to work it out.
The easiest to explain (without going into the technology) is that a GSM phone most common has a SIM card while the "SIM" in a CDMA phone is a fixed install, you as a user / customer cannot change. Since you are in Europe I assume you do have a SIM card thus a GSM phone.
Most ROMs here in the forum if not otherwise specified are GSM and you do need to flash any than your carrier provided ROM.
You must have your phone SECURITY UNLOCKED (which is different from SIM unlocked) to flash a NON Raphael/Fuze Radio.
The ROM you quote IS a GSM ROM.
More on the CDMA the subject can be found here http://www.google.com/cse?cx=000825...+cdma&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
So my touch pro is GSM?What tools do i need to have wm6.5?which rom i mean and what tools?to SECURITY UNLOCK the phone what do i need can you help me out with some steps?does this rom is any good?it will work on my phone?
As mentioned to you in the Energy 3.0 thread, please DO some reading!
You first need to backup your PIM data (contacts), flash hardSPL (please look up the thread and download the software).
Afterwards you can flash a non carrier bound ROM (i.e. Energy ROM where you posted as well).
WITHOUT hardSPL you may BRICK your phone or get STUCK at 0% loading for ages.
Note:
Be aware that you have an original TouchPro not a branded ATT Fuze so you should read up front to get the right keyboard layout back, you'll find the "how-to" here in the forum.
ok 2 more questions for you please sorry if bothering.about hardSPL could you send the page to download it?after i do hardSPL i update with the rom i send you?at the post of this rom it says Download from EU Server > Regular / MSVC which i use Regular or Msvc?And last with right keyboard layout back you mean to bring back Greek language?
hardSPL
http://forum.xda-developers.com/showthread.php?t=410150
ROM version valid 2.0 and 3.0
http://forum.xda-developers.com/showpost.php?p=3749191&postcount=1627
Keyboard... look yourself
i still don't understand what you mean with the keyboard.i downloaded hardSPL and the MSVC rom i send you.now i'm ready to flash my phone?
First you have to flash hardSPL (read the corresponding thread) to allow to flash a non carrier provided ROM.
Afterwards you can flash the NRG ROM you want.
If you have Greek characters on your keyboard I cannot help you but answers HOW TO get the right keyboard layout are in the forum.
If you have the original TouchPro engl. layout just read NRG's first post!!!
If you own a Touch PRO, use the "Keyboard Selector" application under Utilities (after you flash the ROM) to select the proper keyboard layout to use. The ROM comes with the Fuze layout by default.
Click to expand...
Click to collapse
If you really don't know what you are doing, read and learn like all of us did and in two weeks or so you'll be up to speed.
Hi everything worked fine the only thing i have to fix is the Greek language now.thanks for your help.
kostas I'm really not the one to ask since I simply do not know exactly what to do.
You have to change the MUI value in the reg to get the greek characters and keyboard working. Do a search for keyboard mapping or for MUI codes.
There is a Tilt ROM chef called B16B in the Tilt forum who is from Greece, you may contact him he may be able to help.
Perhaps there's something in this search but I don't know
http://www.google.com/custom?hl=en&...G=Search&cx=000825531964825142534:cqr2sjirilw