Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Related
Hi all,
yesterday, i thought it's a nice day to do the official german t-mobile 1.12 upgrade on my official german t-mobile mdac. It wasn't.
After the upgrade (no errors) the bootscreen shows:
no gsm, and only one Version number: 1.12.01 Ger
on the bottom line.
After it bootet, i get no gsm and no bluetooth working. When i connect by usb, active sync hangs for about 3-5 minutes. If i try to repeat the upgrade, i get something like wrong device, and it shows empty fields on the version screen. I tried to do the update by extracting the official update rar and start the update by MaUpgradeUT_noID.exe, but it says something like wrong device.
I tried this to the same with the 1.13 upgrade from the xda ftp, same thing. I tried a rombackup from sd-card that i found somewhere on the net, but the bootloader says wrong section=1 not allowed.
Is there anybody wo could help me to resurrect my poor little mdac?
Thanks alot,
J
Hi J.
Don't know how to solve all your problems with upgrading, but did you copy the first bytes of your own romdump to the downloaded rom? Otherwise your device won't accept it, you can find a lott about this in other threads. try searching for BigStorage and you will everything about rom upgrades.
Good luck, M
Upgrade your device with the imate rom 1.12 wwe using MaUpgradeUt_noID.exe ,it should work ,then try to upgrade to the german rom upgrade.
Good luck
ongoing revival
Ok, i tried that big storage thing, i replaced the id in the new image from my backup (broken) rom, and when trying to upgrade from sd-card, i get Section = 1 not allowed update.
I'm trying to upgrade the radio stack from the bootloader screen with MaUpgradeUT.exe, but it seems that the usb port doesn't work: for 10 minutes, the update screen stands at 0%, then an error appears:
Radio Rom Update Error.. i should reset, reconnect and retry.
Any more ideas? Is there a possiblity to do the normal "online" update (not via bootlaoder/backup-image) just from sdcard?
Please Help
J,
Last night I did a BigStorage in a very easy way. I followed the description in the thread about upgrading to radio 1.13. You'll have to unzip the shipped rom, decode nk.nbf it with dnbf. Then you replace the usual bit pattern and encode nk.nb1 again. After that you can use maupgrade with or without the noid function like a regular apgrade.
Hope it helps you, M
hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.
u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition
but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.
You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).
thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.
So I been trying to upgrade my OS to the tnt 1437, however every time I try my old OS keeps popping up (OS: 5.1.xxx (Build 15671FARIA.3.5)) ... so for the last 3 days I been trying to search this site for any answers, however all I get is that only happens if the CID is locked, but my phone isn't 1) I unlocked it before to upgrade it in the first place to the above mentioned OS and 2) I checked its status with the Wizard Service Tool (which is AWESOME). So i'm at a lose here as to why every time I either upgrade or downgrade the ROM the same OS keeps showing up. BTW Everything else I can upgrade except the OS. Any help is appreciated. thanks!
Anyone? Anything?
Did you remember what version of IPL and SPL when you unlock your Wizard? It is only unlockable when IPL and SPL is 1.xx (i.e. Downgrade to Button's ROM first). You may post your WST log here for more chance to know what the problem is.
Here you go here is the log:
Wizard Service Tool v4.2.1
12/11/07 23:07:22
CPU Manuf. FAILED
MODEL: Wizard
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
Getting more info...
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio values FAILED
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
Getting drives,disks and partitions info...
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5352 - 9.99M (0x9fd800)
eea9813a - 48.23M (0x303c000)
2fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
cfb23fb6 - 3.06M (0x30fc00)
All Done.
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
kegobeer said:
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
Click to expand...
Click to collapse
Yes I tried both the button ROM and the love ROM with no change ... On another note I can change the IPL and the SPL with no trouble however the OS always stays the same.
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
kegobeer said:
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
Click to expand...
Click to collapse
I just tried what you mentioned however I got the following error when I was doing the ROM update .... fyi I got it from the tmobile site ... when I ran the rom update I got:
error [326]: invalid command
this nbf file cannot be used for your pda phone. please check your nbf file.
It looks like you originally skipped the 2.26 rom. I did the same thing the first time I flashed a rom. Try flashing back down to the Button rom, then to the 2.26, then the tnt 1437. It worked for me.
Am I doing something wrong here cause every time I try some downgrade its always the same OS that shows up ... 3.3.0.0 that NEVER changes, everything else does.
i have the same problem..
8125hacker said:
i have the same problem..
Click to expand...
Click to collapse
What OS does your phone boot with?
bad flash rom, you need junk the phone or donate to XDA-developers
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
da_jojo said:
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
Click to expand...
Click to collapse
Out of curiosity when I downgrade to any of these roms am I looking for the OS to downgrade or just the IPL/SPL?
cgigate said:
bad flash rom, you need junk the phone or donate to XDA-developers
Click to expand...
Click to collapse
how is it a bad flash rom if the IPL/SPL and GSM all change everytime i change roms. The only thing that doesn't is the OS.
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.
okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan
Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan
ive got a t-mobile wizard 200 dutch edition
i had a win 6.5 rom loaded and it worked fine
but for some wierd reason i wanted to downgrade it to the original win5 rom
when i was at 55% my 1 year old sun pulled the usb cable
now i can't get any new rom in the phone that works
is there anyone that could help me
everytime i get the bootloader screen and that's al
Don't give up hope. As long as you can get the bootloader screen, you should be able to burn a rom. Try the CR96 WM6.5 ROM, in my signature, which if I remember right comes with a Vista RUU. If it doesn't, search this forum for Vista RUU, which I have found to work well for installing ROMs from the bootloader, in XP or Vista. I don't know about Windows 7, since I have never had it.
i've tried the link you sugested
after running the update the startup screen of the phone changed from t-mobile to a HTC logo and after that it shows the bootloader and nothing more
ipl 2.18.001
spl 2.26.001
is there anyone with an original rom for this phone becouse the one i thought was original is damaged and maybe an original rom can repair this phone
or is there anyone with different idea to solve this problem ?
edit: i found an original german ship rom but when i try to laod that on the phone he gives a error
something with wrong phone id
edit: i found a file with t-mobile g4 ipl/spl after i loaded that one
ipl changed to 2.26.001 spl stayed 2.26.001 but stil no respnce to loading roms
i found a threat where they where talking about the love rom
i downloaded it and uploaded it to the phone and everything was back online and i could do anything again with the phone