Hi my name is Kostas i'm from Greece and i have a touch pro.i need some answers so i can do some update at my rom from 6 to 6.5.i found i rom that i like but i have some questions.
1.What CDMA is and what GSM,what is the difference and how i know which one i own.
2.To update to another rom i have to Hard SPL my phone?and what is this?do i hve to unlock something?
3.If i flash my touch pro can i install the Greek Language?
4.The rom i found is this
Code:
http://forum.xda-developers.com/showthread.php?t=511146
, is it good?which one should i download from this one,the Regular or the MSVC?
Thank for any answer in advance please help me to work it out.
The easiest to explain (without going into the technology) is that a GSM phone most common has a SIM card while the "SIM" in a CDMA phone is a fixed install, you as a user / customer cannot change. Since you are in Europe I assume you do have a SIM card thus a GSM phone.
Most ROMs here in the forum if not otherwise specified are GSM and you do need to flash any than your carrier provided ROM.
You must have your phone SECURITY UNLOCKED (which is different from SIM unlocked) to flash a NON Raphael/Fuze Radio.
The ROM you quote IS a GSM ROM.
More on the CDMA the subject can be found here http://www.google.com/cse?cx=000825...+cdma&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
So my touch pro is GSM?What tools do i need to have wm6.5?which rom i mean and what tools?to SECURITY UNLOCK the phone what do i need can you help me out with some steps?does this rom is any good?it will work on my phone?
As mentioned to you in the Energy 3.0 thread, please DO some reading!
You first need to backup your PIM data (contacts), flash hardSPL (please look up the thread and download the software).
Afterwards you can flash a non carrier bound ROM (i.e. Energy ROM where you posted as well).
WITHOUT hardSPL you may BRICK your phone or get STUCK at 0% loading for ages.
Note:
Be aware that you have an original TouchPro not a branded ATT Fuze so you should read up front to get the right keyboard layout back, you'll find the "how-to" here in the forum.
ok 2 more questions for you please sorry if bothering.about hardSPL could you send the page to download it?after i do hardSPL i update with the rom i send you?at the post of this rom it says Download from EU Server > Regular / MSVC which i use Regular or Msvc?And last with right keyboard layout back you mean to bring back Greek language?
hardSPL
http://forum.xda-developers.com/showthread.php?t=410150
ROM version valid 2.0 and 3.0
http://forum.xda-developers.com/showpost.php?p=3749191&postcount=1627
Keyboard... look yourself
i still don't understand what you mean with the keyboard.i downloaded hardSPL and the MSVC rom i send you.now i'm ready to flash my phone?
First you have to flash hardSPL (read the corresponding thread) to allow to flash a non carrier provided ROM.
Afterwards you can flash the NRG ROM you want.
If you have Greek characters on your keyboard I cannot help you but answers HOW TO get the right keyboard layout are in the forum.
If you have the original TouchPro engl. layout just read NRG's first post!!!
If you own a Touch PRO, use the "Keyboard Selector" application under Utilities (after you flash the ROM) to select the proper keyboard layout to use. The ROM comes with the Fuze layout by default.
Click to expand...
Click to collapse
If you really don't know what you are doing, read and learn like all of us did and in two weeks or so you'll be up to speed.
Hi everything worked fine the only thing i have to fix is the Greek language now.thanks for your help.
kostas I'm really not the one to ask since I simply do not know exactly what to do.
You have to change the MUI value in the reg to get the greek characters and keyboard working. Do a search for keyboard mapping or for MUI codes.
There is a Tilt ROM chef called B16B in the Tilt forum who is from Greece, you may contact him he may be able to help.
Perhaps there's something in this search but I don't know
http://www.google.com/custom?hl=en&...G=Search&cx=000825531964825142534:cqr2sjirilw
Related
i all,
i need to know how old my software is i have:
rom:1.0.7.0
operator:1.6.312.4
radio:4.0.13.17_01.04.00
on a qtek 8300...
is there any newer version? language and t9 in portuguese ?
thanks...
ur software is very old, rom 1.0.70 is old, you should be at least on 2.0.x.0
login to myqtek.com and get the upgrade!
wow...
thanks, i've already try that, but it says my imei in not valid.
my mobile came from dangaard, but i'm from portugal... i send a mail to the place where i bought the phone and they said it was from dangaard!
Dude, that rom is old. Here is a link to download Dangaard/qtek rom version 2.0.9.0 for qtek 8300.
http://rapidshare.com/files/25367924..._Ship.zip.html
many thanks for that.... bu i'm getting file not found on rapidshare...
one more question... will i have portuguese language on menus and on t9?
many thanks
Paulo Fernandes
Sorry, I guess that link expired. I have reposted to rapidshare, and here is the new link:
http://rapidshare.com/files/27726683/TO_DAN_NOR_2090_263111_020900_Ship.zip.html
I don't think that Portugese t9 is available on this rom. But I have attached a cab file (from [[cold]]) that is supposed to install portugese t9.
good luck.
no luck
well it seems that this phone is not from dangaard...
i got the "invalid vendor id" error... what should i do?
application unlock and super CID unlock. search forums for methods, but let me know if you are stuck.
but my phone is not sim lock...and i'm able to install all the apps that i've tryed...i cant't find the cid unlock, could you give me the link...
sorry to be asking all this but i just e wanna be shore that i do things the right way... this phone is 1 week old :|
Well, you're able to install anything you have tried, except the ROM upgrade
SIM unlocked is different than application unlock and CID. Be warned that CID unlock will invalidate your warranty, probably new ROM also will. But the new ROM is worth it, imho. Here is a nice guide describing unlocking/upgrading procedures for 8310, which will also work for 8300:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
well i haven't think about the warranty... what would be the main benefits of the upgrade?
battery? signal strength ? software?
well, the main advantage that I like is being able to use a2dp (wireless stereo), radio upgrades, but others like push email and other stuff. I guess if you are happy w/ your old ROM there is no sense in changing it.
well my main problem is the battery ... it last 2 days. and wi-fi connection to wpa networks
my battery life is about 4-5 days, and I use wifi quite often on secure and wpa networks without problems.
follow the instructions given here and nothing can go wrong:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
robsahm said:
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
Yep! Just HardSPL, and then select an English ROM (most are) and flash.
Read the Sticky in this forum for guide lines on how to flash, and common problems and thier solutions.
http://forum.xda-developers.com/showpost.php?p=1846653&postcount=800
Go there and READ and READ. (Read the Wiki first). You will find all your solution there. Everything you need explained over there.
I will describe the procedures you will need:
1. Back up your stuff
2. Charge up your phone to 100% and connect to your pc with usb make sure ActiveSyn can see your phone
3. CID or SIM unlock your phone first if it is necessary then.
4. HardSPL your phone (You can find the information in the Wiki)
- If you encounter White Screen Problem, check the HardSPL White Screen
Issue - Solved!
5. Find a Rom that you like
6. Find the radio rom that rom supports
7. Flash the rom
8. Do a HARD RESET when you see the "Tab the screen to setup windows mobile..."
9. Flash the radio rom
10. You are DONE!!!!!!!
As long as it's GSM band, then it should all work. You might have to manually setup the 3G network for Germany on your phone.
Thanks for the feedback! My main concern was not knowing if it would work with my carrier after I do the ROM.
However the 3G network is a BIG deal 3G is soooo much faster than GSM. Is it even possible to manually setup the network afterwards?
Thanks again, you have been great!
you can always setup your 3G network manually afterwards. It's just a different rom version. It's like you install English version of Winxp on your PC instead of the German version. You can still setup your wireless connection for your PC.
Sine you are in Europe, I would suggest you use Dutty's WM6.1 Rom (The bluetooth has a bit of issue - not able to receive file transfer, but he's working on the RTM version with the fix). Dutty's rom is cooked based on the Vodafone rom (He's in England), so I would suppose there should be pre-set 3G setting for Germany as well.
Hi dear
I have Qtek 8300 ROM From T-Mobile ,it's come down am looking for rom for this mobile i try with the rom on T-mobile website but does not work with it . please help me ..
So what's the problem? You're in the right place! You can choose from a variety of new custom ROMs, e.g. WM6.1.
Or do you prefer to keep the original rom? Then, if you haven't reflashed it yet, you need to do a hard reset. Try to google or search here how to do it. AFAIR, it should look like holding both soft-buttons and then pressing the power on once. Then follow the instructions on the screen. But the keys combination may be different for your phone.
And before trying to flash the T-Mobile ROM, have you done a SuperCID? If not, a ROM from a different vendor won't install on your phone. You even may damage the phone this way! Just do a SuperCID once and you'll be able to flash any Tornado ROM.
I also have T-Mobile SDA with Windows Mobile 6.5, but a lot of people from GSM Shops says that I can get more money for it, if it would have T-Mobile Rom with Windows Mobile 5.0. I thought about that, but I can't find a Rom for this too.
I was reading the Wiki/FAQ and found this thread and still have some questions on the ROM Radio configuration.
I have a tilt I got from work and the reception is attrocious, so I am under the impression that the ATT ROM and Radio have more affinity for the ATT network than Tmobile (which is my guess because my old Wing had much better signal). What I notice from the list of Kaiser ROMs (on the Wiki) is the only official Tmobile ROMs are for the Netherlands and the UK. My guess is that I wouldn't want to load those since I live in the US, plus the official OS build is 19124 in the ATT tilt instead of 19212 in the other builds.
My question is: Can I mix other Radios to better work on the Tmobile network? Do I need to clear my ROM from the official ATT to another HTC ROM? Does the ROM clear the Windows build so there wouldn't be a compatibility issue, or does it only work for the cell phone service (device communication portion sort of like a DOS on windows 98) and therefore the OS build is independant of the ROM and Radio? Do ROMs and Radios need to be properly paired or can I trial and error it?
I've been looking for some of the answers but the weren't overly appearant from the FAQ and Wikis. Hopefully I didn't gloss over the easy answers somewhere on the site.
Any thoughts? I can start doing the trial and error method, but if I can get some confirmation that I won't brick my phone that would be awesome. Also, if there is any general "method to the madness" in terms of trying the Radios out, I would appreciate it.
This is where you should start:
Flashing Your First Kaiser Rom
The most important consideration for flashing any phone: MAKE SURE YOU HARD SPL (if you are using a Tilt, I recommend 3.56 as that is what AT&T officially used in their last ROM). That way, if you screw up a flash, you can just flash to another radio/ROM without worrying about bricking your phone. Press the Camera+Power button+use your stylus to reset the phone to bootloader to see if your phone is already Hard SPL'd. You should see a 3.28, 3.29, 3.34, or 3.56 at the top left of the screen when the tricolor screen pops up; you can just reset your phone after looking to get back to your OS). If, and only if, your phone is Hard SPL'd, read on...
>Can I mix other Radios to better work on the Tmobile network?
Of course. For example, I am using the emobile radio (1.71.09.01) on my Tilt. See: The Ultimate Radio Thread for more.
>Do I need to clear my ROM from the official ATT to another HTC ROM?
No, you can flash the radio only if you want.
>Does the ROM clear the Windows build
Not if you're flashing just the radio.
>...and therefore the OS build is independant of the ROM and Radio?
The OS build is independent of the radio. Best to think of the ROM as the OS, and the radio as how your OS communicates with your phone...
>or can I trial and error it?
That's the whole point of flashing just the radio--finding which one works best for you.
Thank you for the information. I verified the Hard SPL (3.56) so it looks like I am good on that front.
I just want to verify something you said before I actually do this (since the RUU tutorial told me ROMs can brick my phone and you mentioned Radios are similar in that fashion). The radios listed from the Ultimate ROM/Radio Thread are listed by WMx.x version, not by the associated ROMs. Since I am using the officially released ROM from ATT my version of WM is 6.1, therefore any of the Radios under the 6.1 header are available for flashing to my phone.
Is that correct?
Thanks again and in advance.
Anyone know of a new link for the latest Hard SPL 3.56? I keep on trying to download on rapidshare and I am denied (cause I am a non-subscriber). If there is a mirror that anyone knows of I would appreciate it. I keep searching around and cannot find one.
blackie_chan said:
Anyone know of a new link for the latest Hard SPL 3.56? I keep on trying to download on rapidshare and I am denied (cause I am a non-subscriber). If there is a mirror that anyone knows of I would appreciate it. I keep searching around and cannot find one.
Click to expand...
Click to collapse
I just DL this and uploaded it for you 3.56
Zelendel you are awesome. Thank you very much.
Here is my question I have an HTC 7 PRO (aka HTC ARRIVE,HTC GOLD) the model is HTC USCCHTC-PC93100 I have a student unlock but I need a full unlock. I am new to rom flashing on windows phones im used to jailbreaking and rooting android and ios. I was looking at try to flash this rom http://forum.xda-developers.com/showthread.php?t=1499981 to my phone what I want to know is is it possible to flash this to my model of HTC and if I do flash it will it will I have to take my phone back to US cellular to have them reprogram the phone to their network or will it work just like normal after flashing any adive would help thanks.
Do you have a GOLD (also known as the 7 Pro) or a GOLD_C (also known as the Arrive)? The GOLD is a GSM phone, and won't work on Sprint or any other CDMA carrier. The Arrive is a CDMA phone and won't work on T-Mobile or any other GSM carrier. Flashing the ROM won't help here, either - this is a hardware issue (literally, the radios are different, plus GSM phones have SIM card slots and CDMA phones usually don't). Do *not* attempt to flash a GOLD_C ROM to a GOLD or vice-versa; it'll probably fail but if it doesn't you may make the phone unusable and unrecoverable short of using a JTAG connection.
However, if you want to flash a GSM ROM to a GSM phone, or a CDMA ROM to a CDMA phone, go ahead. However, that won't remove the SIM-lock if there is one. The odds are, if the phone can't be activated with your preferred carrier right now, re-flashing the ROM won't help.
US Cellular says its a 7 PRO but model says 93100 which is the arrive it doesn't have a sim slot so it is a CDMA and DFTs XSPL Tool says its a GOLD_C it has spl version 4.1.230513.1 I have tried the spl downgrade tool but it fails at 4 percent and says invalid vendor ID but if I did manage to flash it would if have to be reprogramed by us cellular to work again since its CDMA and not a sim card
I ran a system information tool and it reports the phone as the HTC arrive so I'm not sure why us cellular markets the phone as the 7 pro but it is definitely the HTC arrive gold_c with a sol of 4.3
Try to flash the older version of your US cellular radio (download from the website in this link http://forum.xda-developers.com/showthread.php?t=1427907)
And then try to flash it, using the directions listed here
http://forum.xda-developers.com/showthread.php?t=1295068
In other words, you want to downgrade your SPL with just a radio flash (task 00). It is not necessary to flash the whole ROM. (Or you can do a hard reset - no big deal, as you will loose all your stuff anyway if you do flash a new ROM)
Then, you can go ahead and try to change RSPL and flash the ROM to see if it works. If not, not big deal, can always flash back your stock rom (also avail on above web site)
I have managed to downgrade my htc arrive us cellular spl and I used the xspl tool to install rspl and hspl now is it possible for me to flash this rom image: http://forum.xda-developers.com/showthread.php?t=1499981
the only thing is the rom image says gold_c_sprint and my carrier is us cellular will I be able to flash this and use the phone like normally or will I have to take the phone back to us cellular after flashing and have them set the phone back up with there network
I have managed to flash my phone with the rom I posted and it still works but all branding on the phone is now sprint is there any way to get the branding back to US Cellular via reg edit for warranty purposes I have went into
HKLM\System\Platform\DeviceTargetingInfo\ and changed mobile operator to USC-US which is US cellular
I also changed the MODeviceName into USCCHTC-PC93100 which was the original name of the device. but im not sure if there's anything else that need to be changed and I cant figure out how to get the marketplace back to the us cellular marketplace they had apps that were only available when it was set up with us cell
I would be careful of changing things in DeviceTargetingInfo; poke the wrong setting and your Marketplace (and all apps installed from it) can stop working or your phone may receive an update that damages it due to an incompatibility with a prior update from a different MO or something.
There is a "Marketplace Config" app available that allows you to select the OEM and MO marketplaces. On a GSM phone, the MO marketplace is usually automatically switched depending on the SIM card (this switch may take a day or two).
Another option would be to start with the US Cellular ROM, and customize it with full-unlock and any other changes you want. This is not my area, though; I have no real experience with creating custom ROMs but there are entire sections of this forum devoted to the topic.
that might be what I have to do is just make a custom us cellular rom Ill look for a section in the fourm to see what I can find on how to make a custom rom
please give me link for us cellular raido
I have htc 7 pro aka htc arrive gold c mobile which is us cellular and I have spl 4.1
I have dft tools to install hspl but I can't find raido to downgrade spl. I googled so many sites but all those raido links for htc hd7. only in this thread mentioned about us cellular radio but the link was expired.please post the new link. thank you
sorry for my bad english
Finally......
Ramesh006 said:
I have htc 7 pro aka htc arrive gold c mobile which is us cellular and I have spl 4.1
I have dft tools to install hspl but I can't find raido to downgrade spl. I googled so many sites but all those raido links for htc hd7. only in this thread mentioned about us cellular radio but the link was expired.please post the new link. thank you
sorry for my bad english
Click to expand...
Click to collapse
Yahooo! i have found my radio. just googled htc 7 pro shipped rom.