after i upgrade my Magician , i see on bootscreen "NoGSM " and ofcourse i can t use the GSM services when it s working,,and when i try to reflash it with a new upgrade , it couldn t go on ,,,0% and give me error 114
Could anyone help me pls ,,,,,
Thanks
Did you try reflashing the RadioROM only (radio.nbf)?
yes i tried to reflash it only with the radio ROm .... but no way ,,gives me thesame errror
pls help
You will have to use the "NoID RUU" instead. There are many pages here with different versions that you can choose from.
Related
when i upgrade [loading rom] WM6 version "FantasticMobiz_v1.1i" my battery crash down.....
then i charge battery .... and start o2
i got to bootloader with screening ....
RUU
IPL 2.15.001
SPL 2.20.001
USB
... then i decided to load original ROM "RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship"
at 80% of loading it will stop at 1 minute with red strip then continue to 95% and then again stopped with error : Invalid Command : this rom is not for this pda
this type of error usually not occurs.......
this error code have solution....
go to customer service center and get new flash rom code....
but i don't know that what is new code rom.....
Can anyone help me.....
email : [email protected]
test with a nvid rom
checked..,.
i checked with NVID ROM
still have same problem....
you gotta remove the IPL/SPL for NVID,as the rom has the IPL/SPL installer itself..
the solution is:
recook the NVID ROM.
how? :
visit www.molski.biz
then look for "cook your own ROM".
the instructions are out there.
there is nothing but Radio Rom Problem.... solved
hi guy,
i solved this problem....
so thread is close...d.
thanks for suggestion.
Hi snggwt
How did you solved, could you explain us, I am having the same problem.
thnx
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.
okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan
Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan
my magician after flashing with the latest rom , i got this error ,, i got not GSM and Error 114 if i try to reflash the radio again
could anyone help if u please
I'm still convinced that you will need to get a RUU that is made specifically for updating the radio (to at least 1.12) only
Thank you for ur help , but i already did it many times and nothing new ,, always give me the error 114...
i have all the radio versions of my imate .... and i tried all of them ,.but no way
Thanks anyway
I have a magician I try to flash the first realese of cotulla but now it's dead power on boot mode if I try to flash any typr of firmw go bad I try to use jafwm and give me Flashing Region faild .... I don't know how recover this
any help to recover the phone ....
If you're in bootloader mode, try flashing the stock ROM and see if that'll spring it to life.
what you mean stock rom???
he means the original ext rom http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
and use the MaUpgradeUt_noID.exe if you get the country id error
I try but I give erro 113 when start to flash ext rom ... just after complete radio flash ..
ps
after test raio flash ok
nk.nbf CE rom file give me error 112
ms_.nbf Extend give me error 113
hello friends i have updated my M500 orange UK. but now its NO RADIO Problem . i tried to update radio Rome but every time Error that showing to Soft reset and try again. help please..
best regard,
baljitsb
same other suggest to solve problem???
rom
POIOS NICK GALLIS EISAI ESY ??????
EAN EISAI O GNWSTOS ANTE PARE KAMMIA KAINOURGIA SYSKEYH AN OXI TOTE DES AYTA
http://www.cotulla.pp.ru/Magician.html
Einai o MAGOS tou Magician ;
des to diko mou
I hope samething help me to recover this ....