Database Info

new maupgrade

Solved problem of country id disabling checking of country e operator in maupgrade...now work again my imate!

Can you explain how you do it ?
Thanks

i can give you the file...i disassembled the code and reverse the jmp after the checking:
test eax, eax
je ....
become
test eax, eax
jne....

does it work?Have you try yet? Can you send me that file?

where can I download it?

i'm checking if works on 106 rom and then i will put it in some place to download...

if it work with older version, send me it, I have two weeks damaged device :-(

Did your file worked finally? Please tell us and upload it on ftp://xda:[email protected]/Magician if its possible!

I'm uploading now in ftp...i hope it works.
I tryed it on 3 or 4 rom version 1.06 from different country and works for all of these.
Let me know if there is any problem :lol:

i forgot to say that this works only in bootloader mode, so u can run it when device is on but give country error and at the second time u run (the device is already in bootloader mode), it works.
Now i'm trying to make a version that avoid checking both in bootloader and CE mode.

i forgot to say that this works only in bootloader mode, so u can run it when device is on but give country error and at the second time u run (the device is already in bootloader mode), it works.
Now i'm trying to make a version that avoid checking both in bootloader and CE mode.

NICE WORK, AFTER 2 WEEKS I NOW CAN FLASH MY DAMAGED MDA Compact, I LOVE YOU!!!!

are u flashing now? i'm just terminated to flash 1.06 WWE rom on my italian imate and works well.
U can also choose the extend rom to load before u run the program by substituting (?) relative .nbf files.

Yes, I have it flashed and MDA now work. First update stop on error, because my battery was discharged, but now it is OK!!!

Well, so it works... :wink:

Yes and I send you big KISS :wink:

Be careful with this file.... you can simply kill your device...

yes!!!!!!!!!!!!
finally it works!!!!
ftp://xda:[email protected]/Magician/MAupgrade Ut.exe cracked/

that link doesn't work pablo. anyone have one that does?

I can confirm a successful update to i-Mate 1.06 WWE using this method.
Thanks for the work dude.
Cheers

Problem with rollback to original TMO-ROM

Hey guys,
I tried the WWE-ROM with BigStorage now, but I just want to go back to the original TMO Germany ROM, cuz I don't have big advantages of it but I lose my warranty...
Now my Problem:
Upgrading to WWE was just easy as described in the Procedure.doc on the ftp. But what do I have to do to get the original ROM back?
I saved it as a German.nb1. D I have to use ntrw write German.nb1 h: ? (h: is my sd-card-slot)
That way it doesnt work, the Bootloader doesnt even recognize the ROM. When I backup my WWE-ROM to the SD-card and the use that ntrw command from above, the ROM is recognized, but after having updated it, I can't bot anymore.
Hope anybody can help
greetz Stefan

Shipped rom?
Hi Stefan,
Seems like there's something wrong with your original rom-dump. Had it myself & it's a pain in the ***. Why not download the original German TMO shipped-rom & try it with the normal usb upgrade method?
Since your magician won't boot the software will probably tell you're upgrading from version blank, but that's no problem it will work. just put it into bootloader, connect usb & start the update program.
Success, M

seems to work, I'm just upgrading it, just had to put it in bootloader-mode again and start the update-utility from t-mobile.de...
will report if it really worked later on

Hi! you would do me a great favour by putting the rom on the ftp! i would really need it!
Please!
are you from germany or from austria?
greets

I don't need to upload it, its not even the most recent version (my original ROM was never, but I didn't find the original from TMO in a newer version :-( )
Just download it from t-mobile.de, I'm from Germany anyway...
greetz Stefan

Some Please Help!

I tried to update my rom with a jester rom RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe i wasn't sure if i had g4 or g3 but its a newer qtek. The install finished 100 percent but my phone is stuck on 3 colour bars red green and blue, it says IPL 2.09 and SPL 2.20.001 when i plug the USB it detects it and displays USB at the bottom
CAN SOMEONE HELP!

jester rom
just reflash using an old shipped qtek rom from the ftp watch out for a 2.20 rom

Still No Luck
I just tried to flash with this rom ROM_QTEK_S200_2.20.7.34_2.47.21_2.20.7.114_WWE.zip
using this thread as a guide to repair my phone
http://forum.xda-developers.com/showthread.php?t=283245
and during the update i get a red bar at 80% and it tells me that i have the wrong nk.nbf
What else can i do?! can someone suggest another rom or something else

try this
ftp://xda:[email protected]_220734_2207114_024721_QtekWWE_Ship.exe
please tr this rom and report

Thanks for the help man! okay heres the scoop, i just tried a really old rom that used to work on my qtek s200 if you guys remember its this one: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip
The result of that was it got to 80% the bar turned red and then on the computer it told me that i had the wrong NBF file
What scares me is that this one actually used to work!
I just left the house for a while and i will try the above rom and then report back...
Does anyone have an idea why it keeps giving a red bar then saying i have the wrong NBF?...

I just tried the rom you suggested....i get a vendor id error. My qtek doesn't even know its a qtek anymore whats going on here, when i tried the above jester rom the installation completed is it possible it thinks its something else still?! please help
Also is there away to charge the phone while in the bootloader...it doesn't charge anymore and once my battery is done im stuck!

vendor is the person who sold it to you...
just get a no vendor id update tool on the ftp site under tool and replace the update tool from any rom you wanna try

turkishhusla said:
I tried to update my rom with a jester rom RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe i wasn't sure if i had g4 or g3 but its a newer qtek. The install finished 100 percent but my phone is stuck on 3 colour bars red green and blue, it says IPL 2.09 and SPL 2.20.001 when i plug the USB it detects it and displays USB at the bottom
CAN SOMEONE HELP!
Click to expand...
Click to collapse
Hi,
however im also new to upgrading etc but heve got some exprnc from forum, so what im going to suggest u may help.
Whatever u mentioned in ur first post, conclude that u had G3 prophet before flashing to Jester's -r1 for G4( it was ur unlucky mistake). Because Jesterz-r1 for G4 do not include ipl,( if u extract it using typho5.exe u find spl file with other OS,GSM,Splash etc but not ipl) thats y ur ipl remains unchanged after flashing, and ur spl changed. so for recovery first u get Jesterz -r1 for G3 from ftp and then try 2 alternative.
1)Extract Jesterz-r1-G3 using typho5 and get only OS, GSM, ExtRom portions
and dont select it ipl or spl files. After that make a fresh nk.nbf file using
nb2nbf_tornado.exe with OS,GSM and ExtRom files.(be cautious to use
nb2nbf_tornado.exe, if ur not aware of its correct use for prophet).
then flash ur device with newly created nk.nbf and Prophets RUU.
2)Just flash ur devce with Jesterz-r1-G3.
Im sure with first alternative, u wont damage ur device further, but i cant say about outcome of second alternative.
thanx
nandlal

Can someone confirm if my prophet was a g3 or g4 prior to flash? and if flashing with a g3 rom will damage my prophet further.

Your IPL/SPL ends in .001 so that means you have a G4 prophet. I have no clue if flashing with a G3 ROM will be bad.. I'm assuming it will. But I'm just a fellow newb...

turkishhusla said:
Can someone confirm if my prophet was a g3 or g4 prior to flash? and if flashing with a g3 rom will damage my prophet further.
Click to expand...
Click to collapse
Dont confuse, U had G3 Prophet before upgrade and it will remain so. For ur other question, i'v PMed u answer.
Reply as u proceed.
thanx
nandlal

how to install the original rom? please help!

hi everyone,
i got an O2 neo aka htc prophet and long time ago I flashed my room (no idea which version and from whom)
now I need to send it back to get it repaired and I cant install the original room, because downgrading just doesnt work. (I get a message like:
the nbf files cannot be used for your pda phone, please get newer nbf files)
What can I do?
I really would like to use the warrenty and get it repaired. So please someone with knowledge help me out.
thanks
Liu

just found out that my
rom version is: 2.20.7.34 WWE
extrom version: 2.20.7.114
and the original image version is 2.15.4.140.
anyway to dowgrade that ****?
maybe unlock extrom or something? (I have no idea what im talking about, so please please help me out )

Same problem here...did you find away...did it previously but cant seem to find the right one...

Guys check the posts their is a link to the original prophet Roms, then after that follow the upgrade manual ok any doubts send me a message.

look in the wiki the orig roms are there and how to flash them

Need original orange rom NL or QtekNL rom ( m600 )

Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
it was on here :
http://rapidshare.de/files/35062662/OrangeRom_Original_Dutch.rar
but not anymore !
EDIT :
seems its not on any ftp.
I have seen a qtek NL rom ... that would be aweome too ...
EDIT 2 :
trying this one...
http://www.qtek.nl/S200_updates.asp

Dane_sober said:
Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
Click to expand...
Click to collapse
Unless it's here: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs or on the Orange NL site, you'll have some trouble finding it...

bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????

Dane_sober said:
bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????
Click to expand...
Click to collapse
HardSPL/SoftSPL will. (I'd recommend SoftSPL as an official ROM will overwrite the SPL any way).

I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.

Dane_sober said:
I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.
Click to expand...
Click to collapse
If all else fails, I'd suggest unpacking the ROM download file (right click on your PC and select "UnZip/UnPack here") and then copy the nk.nbf file from that into a folder with the "NEW" RUUs and flash it as though it were a new WM6.1 ROM (including the Hard/Soft SPL)...

I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !

Dane_sober said:
I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !
Click to expand...
Click to collapse
Can your device boot up? (is it stuck in bootloader?)

I managed to install a wm 6.1 rom
sucessfully
Thanks l3v5y !!!
But still no dice with TOMTOM NAVIGATOR 6
the program hangs after the splash, but when I boot without the SD card, it says no maps found. So there might be a conflict on the SD.
TTN 7 does not work either ( just tried to install the diamond .cab to see if it worked)
But the prophet device is not compatible.
Sillyness is that is used to work perfect.
I'm going to try to find a solution for this, if else I'll FW-down back to WM5 or 6.
Which is a bit more familiar for the original owner.