Database Info

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.

...at least the Operator for QTEK...
C'mon guys... help me.

Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.

Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...

Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...

The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

Problem with rollback to original TMO-ROM

Hey guys,
I tried the WWE-ROM with BigStorage now, but I just want to go back to the original TMO Germany ROM, cuz I don't have big advantages of it but I lose my warranty...
Now my Problem:
Upgrading to WWE was just easy as described in the Procedure.doc on the ftp. But what do I have to do to get the original ROM back?
I saved it as a German.nb1. D I have to use ntrw write German.nb1 h: ? (h: is my sd-card-slot)
That way it doesnt work, the Bootloader doesnt even recognize the ROM. When I backup my WWE-ROM to the SD-card and the use that ntrw command from above, the ROM is recognized, but after having updated it, I can't bot anymore.
Hope anybody can help
greetz Stefan

Shipped rom?
Hi Stefan,
Seems like there's something wrong with your original rom-dump. Had it myself & it's a pain in the ***. Why not download the original German TMO shipped-rom & try it with the normal usb upgrade method?
Since your magician won't boot the software will probably tell you're upgrading from version blank, but that's no problem it will work. just put it into bootloader, connect usb & start the update program.
Success, M

seems to work, I'm just upgrading it, just had to put it in bootloader-mode again and start the update-utility from t-mobile.de...
will report if it really worked later on

Hi! you would do me a great favour by putting the rom on the ftp! i would really need it!
Please!
are you from germany or from austria?
greets

I don't need to upload it, its not even the most recent version (my original ROM was never, but I didn't find the original from TMO in a newer version :-( )
Just download it from t-mobile.de, I'm from Germany anyway...
greetz Stefan

Stuck at bootloader

Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L

Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!

Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers

Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!

Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance

Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?

find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!

or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/

malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.

Try PDA Viet Step 1
Try PDA Viet Step 1 Temp

hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards

Try this.
If that fails post again but be more specific e.g. what did you do before this happened?

Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen

can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me

Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe

hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7

sorry i can use the link
downloading

saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.

hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me

2.58.0001
Click to expand...
Click to collapse
Never seen that before...

Need original orange rom NL or QtekNL rom ( m600 )

Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
it was on here :
http://rapidshare.de/files/35062662/OrangeRom_Original_Dutch.rar
but not anymore !
EDIT :
seems its not on any ftp.
I have seen a qtek NL rom ... that would be aweome too ...
EDIT 2 :
trying this one...
http://www.qtek.nl/S200_updates.asp

Dane_sober said:
Does anybody have this rom ?
i have the english version, but i need the NL version.
thanks in advance !
Click to expand...
Click to collapse
Unless it's here: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs or on the Orange NL site, you'll have some trouble finding it...

bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????

Dane_sober said:
bah
the qtek version wont install ( wrong vendor ID )
is there a way to CID unlock G4 models ????
Click to expand...
Click to collapse
HardSPL/SoftSPL will. (I'd recommend SoftSPL as an official ROM will overwrite the SPL any way).

I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.

Dane_sober said:
I tried softSPL and had some errors in the pop-up command box.
I'll try again tomorrow.
Click to expand...
Click to collapse
If all else fails, I'd suggest unpacking the ROM download file (right click on your PC and select "UnZip/UnPack here") and then copy the nk.nbf file from that into a folder with the "NEW" RUUs and flash it as though it were a new WM6.1 ROM (including the Hard/Soft SPL)...

I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !

Dane_sober said:
I tried that ( also with prophet tools ) but it didnt work for me :S
I'll try later and post the updates here.
Thanks for thinking with me !
Click to expand...
Click to collapse
Can your device boot up? (is it stuck in bootloader?)

I managed to install a wm 6.1 rom
sucessfully
Thanks l3v5y !!!
But still no dice with TOMTOM NAVIGATOR 6
the program hangs after the splash, but when I boot without the SD card, it says no maps found. So there might be a conflict on the SD.
TTN 7 does not work either ( just tried to install the diamond .cab to see if it worked)
But the prophet device is not compatible.
Sillyness is that is used to work perfect.
I'm going to try to find a solution for this, if else I'll FW-down back to WM5 or 6.
Which is a bit more familiar for the original owner.

2.03 TX WWE to Win Mobile 6.1

I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53

I have the same Problem. But it's not just that I can't upgrade to 6.1... I can't do anything. I tried to get different Roms on my Magician. The original Rom too...but nothing works. All that since I tried the 2.03TX Rom... The 2.03TX is working nice at the moment but I would prefer the original one or WM6.1 Please help!!!

I had no problem switching between tx and 6.1 - both directions.
The only thing I had to be aware of is the radio version. 2.03tx doesn't install it's own radio and last cotulla rom requires radio 1.12.

my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.

phamhien said:
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
Click to expand...
Click to collapse
Check following 3 points:
1. Make sure your device is a "Magician"
2. Make sure the downloaded ROM is one of Cotullas WM6.1 (O1 , O2 or O3)
3. Befor flashing make sure the Radio on the Magician is version 1.12

Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?

Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.

targets said:
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
Click to expand...
Click to collapse
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)

kamillo-s said:
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
Click to expand...
Click to collapse
Maybe you have a problem with your PC, maybe you are doing wrong, or maybe your Magician is corrupted.
I don't know much about the bootloader, guess it is on his own chip and not changeable at this time, otherwhise it could be a part of the rom but i have never seen a Magician bootloader-file for itselfs.

hubie53 said:
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Click to expand...
Click to collapse
try to change the usb port to another....
or make sure u have the newest activesync...

Thanks for your help! i 've upgrade succesed for my magican!

I try update on other magican, and was succesfuly. I think I cant update rom after instaling 2.03 tx that something was broken or its something wrong witch magicans software. I have this same model of magican ,and other rom, and I can flash it.

same same here
i had the same problem with my magician i think it happens with some devices not all of them i couldn't find any way yet to solve it.

WM 6.1 for Magician-a fake?
Managed to flash my device with Windows XP. Works fine, thanks to all helpers!!!

dead.....!!!!
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!

learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
thx the problem was solved.thx

hubie53 said:
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
Click to expand...
Click to collapse
i Have flash my jam with 2.03 TX WWE and then downgrade to original i mat jam
after a month i flashed it again and can't downgrade or upgrade or do anything for 1 1/2 year
i tray many things like sd flash and many roms but it didn't work
may be Mr.Cotulla have a solution for it or any one have it share it to us
the only thing we can made is to inter the boot loader mode
Thanks