Related
Hi.
I damage MDAc with testing of flashing Now only what I can is start MDAc to BootLoader (version 0.2), nothing else. All updates, what I testing are "Country ID error" and dont help me changing operator too. I have other device, but it is I-Mate JAM. From JAM (BootLoader version 1.0) I download ROM to SD card (via USB terminal), but when I insert card in MDAc, only, what I seee is "Not allow update!". When insetr SD to JAM, all is OK and flashing is allowed. I dont have SD card reader. What can I do?
Thank!
V okamžiku kdy spustíš nový upgrade, a napíše ti to "country ID error", hned zmen operatora u toho updatu na jiny, cihlu ponechej připojenou, a upgrade spusť znovu. Opakuj dokud nevystřídáš všechny čtyři operátory. Vůbec mezitím neodpojuj cihlu od PC. Pokud se to nerozjede ani s jednim operátorem, zkus hned jiný upgrade, a postupuj stejně.. Takhle jsem kdysi probudil jednu totálně mrtvou MDA II.. I´m busy, so I don´t have a time write it in english.. SORRY
And which four Country ID codes you mean? :wink:
T-mobile, CDL, Qtek, O2. Test upgrade with this all operator, and let the Compact connected to PC during this testing..
And ID's ?
I don´t know it.. But I think, every operator has his own upgrade, so find them and test them.. Someone must work!!!
"Country ID error" is diferent between this upgrade..
I dont know why, but now my MDAc can boot to system (but without GSM). I run GetDeviceData.exe and this is DeviceData.txt. As you can see, some informations are missing. I test start upgrading on JAM and after verify I connect MDAc, but this dont work too.
Give me your phone number. I want to speak with you.. It will be quicker.
I'am not on phone now, go to ICQ :lol:
Where can I find Divice ID in update files? Now I have Error 100 message
Where are you come from?
Czech Republic. Why?
I still need help
Try this:
http://forum.xda-developers.com/viewtopic.php?t=14553
It allowed me to flash an english Rom (and later an Italian one) over a German device. I suppose that if you find right international codes of your rom you can flash the new one.
Good luck! :wink:
thanks, but this dont work too, still wrong country ID
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
Hi all,
I do a lot of flashing my vox with no problems...
but today i tried to flash it with a rom i dl, and now my vox never start
i can't do a hard reset (cause no rom inside now)
i plug the usb, turn on with the camera button, i'm on the screen red green blue, but when i try to flash it again, i've got an error..
or UPDATE ERROR or INVALID VENDER ID
depends wich rom i try to flash
I don't know what to do .... i'm so sad
please all, HELP ME ....
i'm searching a solution...
cause i want unbrick my vox
i find in other smartphone or pda phone that i need a NO ID update utility
like : ROMUpdateUtility_Wizard_NoID.exe
but for the VOX.
can someone help me please ?
UP .
i'm sorry but i really need someone to help me
Just reflash with your official rom at member.htc.com and you're done
there is no offiicial rom avaible, or i cant find it
cause my phone isn't a branded phone
i've a french sfr S710
EDIT :
i don't think that will work. i think my phone had his ID change so the best way is to have an updator with no_id.
is it possible ?
Did you try this?
Or ask Dr Gonzo! in french as you want
it's 3 part in .raw
i don't know what to do with this
Bonne raison pour t'acheter un iphone!!! lol
Sinon rends toi dans le magasin SFR le plus proche, que dire de plus.
sinon demande à quelqu'un de dumper son htc s710 SFR pour toi
okay first of all calm down.. your vox is far from bricked.. As long as you can get into the bootloader its not a very big deal..
What is the exact name of your model ? Is it a HTC S710 or SPV E650 or ?
Let me see if i can find the HTC rom and i will report back.. You need to flash that rom while the usb cable is plugged to the phone and your in the bootloader! Active sync won't connect, but that dosn't matter.. !
ok mine is a HTC S710 from SFR
i know iit will be ok by the bootloader, but i try lots of rom and nothing
i dont know where to find an official rom
@seudeman :
Mon bosse en a un d'iphone je vai lui echanger il y verra ke du feu
Exact, vu que les deux se ressemblent hihi!
Tu n'es plus tout seul on va t'aider
secable said:
ok mine is a HTC S710 from SFR
i know iit will be ok by the bootloader, but i try lots of rom and nothing
i dont know where to find an official rom
@seudeman :
Mon bosse en a un d'iphone je vai lui echanger il y verra ke du feu
Click to expand...
Click to collapse
Okay here you go found the newest official update from HTC
http://www.mypageofmanythings.com/files/RUU_Vox_HTC_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe
Download it.. Now follow these steps
1. Restart your computer !
2. Turn of the Vox completely (just remove and reinsert battery)
3. Wait untill the computer is started up and ready
4. Hold down camera button, insert usb cable, that is connected to pc, and keep holding it down untill you enter the bootloader
5. Now Active Sync won't start syncing, but you should hear the windows usb connection sound.
6. Launch the RUU and follow steps, just remember that an active sync connection isn't nesessary to flash the rom.
That should work. If not write back then i have another solution..
ok snifff
the same again
INVALID VENDER ID
... i need help
even i can try to send it in garanty ???
UP for today ?!!?
'cause i'l send it in garanty this afternoon...
so if someone have a solution
HardSPL FTW! Too bad none for us right now. USPL is good enough. Anyways...
When you start up into bootloader, either post a picture or copy down the versions and identification numbers and post them here so we have a bit more information.
I think we might need to patch and re-checksum an official ROM for your botched CID.
hi thx
so i cant put a picture.
here is the numbers :
ONBL 1.34.0000
SPL 1.34.0000
CPLD - 04
it's all i have on the bootloader screen
thx a lot helping me
EDIT :
this afternoon i can have the same phone like mine in hands.
maybe there is a way to back the rom of that one and flash into mine ??
but i'm not sre it's the same version of SPL or something else
Sry i didn't post yesterday went to bed..
But there is still a 2 solutions.. The one of them is if you get the INVALID VENDOR ID you could try TyphoonNBFTools and open the rom with it.. When you launch the update utility it will extract some files.. Those a usually located in the temp folder of your pc . You will need to edit one of these files BEFORE your begin the flash.
Get TyphoonNBFTools and open the *.NBF file from the temp folder on your pc with it. The RUU will be open in the background but that dosn't matter
Now when you have opened the NBF file with TyphoonNBFTools go to the Operator line and DELETE the contents in it! Save the file, close TyphoonNBFTools and continue the RUU ..
Now that you have removed the Operator code in the rom, it won't come op with the Invalid vendor ID error..
The other easy solution, is to flash the USPL located on top of this forum and after that reflash your rom. That should work right away!
ok i try
for the USPL rom on top of the forum i tried it doesn't work
i try TyphoonNBFTools
secable said:
ok i try
for the USPL rom on top of the forum i tried it doesn't work
i try TyphoonNBFTools
Click to expand...
Click to collapse
If you need any help with it write here .. It can be a little complicated the first time you try it
after i upgrade my Magician , i see on bootscreen "NoGSM " and ofcourse i can t use the GSM services when it s working,,and when i try to reflash it with a new upgrade , it couldn t go on ,,,0% and give me error 114
Could anyone help me pls ,,,,,
Thanks
Did you try reflashing the RadioROM only (radio.nbf)?
yes i tried to reflash it only with the radio ROm .... but no way ,,gives me thesame errror
pls help
You will have to use the "NoID RUU" instead. There are many pages here with different versions that you can choose from.
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
????
Did you try a hard reset?
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
What do you mean by "I execute Remove hard SPL?
Do you have a herald or a wing? or an Atlas? What version of WM did you have? Did you try to flash it if yes with what and how?
Yes i try a hard reset.
I execute a Remove_HARD-SPL_On_The_Wing to try reconfigure my phone.
i have a wing.
i cant do anything, and not detect my phone on computer.
i think isn´t with SO.
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
don't panic.
get your phone into bootloader mode,by pressing and holding camera button, while pressing reset button. your device's screen will become tri-colored, and connection with pc will lost. next, you should run this file
http://www.megaupload.com/?d=1OTD3E3M.
at the end, the official t-moble rom will be on your device.
good luck.
ok i try it but, give a error [294] : INVALID VENDER NUMBER
This update Utility cannot be used for your PDA Phone. Please check your Update utility.
BTVDV:69-HFTD56670-HFTD56670-T.0RF577-HFTD56670
Tks.
PS: My cell phone is from brazil.
Willian Massaki said:
ok i try it but, give a error [294] : INVALID VENDER NUMBER
This update Utility cannot be used for your PDA Phone. Please check your Update utility.
BTVDV:69-HFTD56670-HFTD56670-T.0RF577-HFTD56670
Tks.
PS: My cell phone is from brazil.
Click to expand...
Click to collapse
search google or this forum for another "official herald rom".
ok, thanks very much...
so if you find anything. please,post here..
thanks
this is what you need
http://www.mediafire.com/?2nq9iu0a2nt
download it, run it when your device is in bootloader mode, and save it on your pc
... don´t function, give me a some error.
i try many rom, but i cant. i think is my phone. Brazil - Tim.
i dont find this rom.
Please help me.
HTC from brasil, dont can help.
Did you try the search term"I bricked my wing" on this site? There are alot of results that you can use to bring back your phone to its original official t-mobile rom..It happened to me along time ago .
Yes, i try it. but it don´t work. give me a erro. i think my htc is lock to recived other rom, that default system, PT - brasil - tim. If help, my serial Number is BZ741G201397.
Thank´s
My
Ipl 4.18.0002
Spl 4.18.0000
Guys, his phone is from Brazil, using a provider named TIM (it is NOT the same as t-mobile).
@Willian Massaki :
Em Portugues : da uma olhada neste link (http://forum.xda-developers.com/showthread.php?t=389121), Phunxx tambem tem um P4351 da TIM e este usado a ROM Open Touch 4.0 sem problemas, vale a tentativa.
In English : have a look at this link (http://forum.xda-developers.com/showthread.php?t=389121), Phunxx also has a P4351 from TIM and is using the Open Touch 4.0 ROM without problem, might worth a try
Massaki,
(faz tudo no bootloader jah q o seu win jah tah com flash errado)
primeiro da hard spl pra dexa o spl em 4.xxx.yang
tuto do aserg policies e do hspl(http://forum.xda-developers.com/showthread.php?t=358615)
Dps disso da flash nesse aqui:
http://forum.xda-developers.com/showthread.php?t=437385
usa o flash center (http://rapidshare.com/files/79249048/Flash_Center.rar)
Espero q de certo
Hi,
didn´t work. =(
1 - I cant use active sync.
2 My phone is Brazil - TIM - HTC - 4351 - ATLAS.
I need a Original TIM BR ROM. I request to phunxx, if he has...
Thanks.
RELAX
Hi, do you try to start the bootloader an after that install any rom for this model (atlas, wing, p4351 is just the same!!!) this also happen to me when I try to unlock it (two times, one for Tmobile's phone and one on AT & T's) and that happen because I try to unlock it before install a new rom (I guess). just try:
1) connect the phone to the pc. (turned on)
2) press camera button firmly and then the reset button
3) the bootloader must start now and the message "usb" should be in the botom of the three colors screen
4) run the rom and follow the instructions on the pc.
I hope you cans solve this issue, good luck!!!