I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.
Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.
Hi all,
I just bought my German language mda compact II. I thought I was buying the old mda compact and I could change the language to english.
Is there any way to change it to English? I think I wouldn't even mind going back to windows mobile 2003 se either.
thanks
Andrew
Change your ROM to WWE is a best solution for you! Check this link to download WWE ROM for your Device :lol:
Good luck!
Sorry, here it is:http://www.iris-global.com/t_mobile_download/index.html :lol:
Good luck!
Thank you!
I downloaded the file but when I tried to install it it said it has a vendor problem. It is a german t-mobile phone. Could you help me how to get arount this problem? Now there is no ruu.conf file like in the case of mda compact.
Thanks
Andrew
It not a problem. Use ROMUpdateUtility_Wizard_NoID.exe.
telemix said:
It not a problem. Use ROMUpdateUtility_Wizard_NoID.exe.
Click to expand...
Click to collapse
Thanks. I tried MaUpgradeUt_noID.exe but that one doesn't work with the windows mobile 5. Where can I get ROMUpdateUtility_Wizard_NoID.exe?
thanks for all your help
Andrew
Wizard_RomUpgradeUtility_noID.rar
Thanks for the info very much!!!
THANK YOU THANK YOU THANK YOU
IT WORKED!!!
now I can finally use my phone.
thanks again
Got "Error [240] : File Open"
telemix said:
Wizard_RomUpgradeUtility_noID.rar
Click to expand...
Click to collapse
Hi there,
after I run it on my PC, I got the error "Error [240] : File Open"
Don't understand what can go wrong ?!
Can you please kindly help !!
//Genc
I broke my sister's XDAmini .. I'm going to be punished
i have an XDAmini in german and I want to instal on it Windows 2003 SE in English. while trying to instal Win93 Se English on it, the instalation faliled with the language error.. The XDAmini is empty now.. Does this file ROMUpdateUtility_Wizard_NoID, work in this phase, when the XDA's ROM is empty ? I tryed to run this program, it starts, but I get the error that my device is not connected ..
I tryed to put back on the XDA's ROM Windows 2003 german version (i'm not shure it's the same version that was originaly on the XDA) but I still get the "Country ID" error ..
Please help me.. and tell me what to do
Re: I broke my sister's XDAmini .. I'm going to be punished
djbigice said:
i have an XDAmini in german and I want to instal on it Windows 2003 SE in English. while trying to instal Win93 Se English on it, the instalation faliled with the language error.. The XDAmini is empty now.. Does this file ROMUpdateUtility_Wizard_NoID, work in this phase, when the XDA's ROM is empty ? I tryed to run this program, it starts, but I get the error that my device is not connected ..
I tryed to put back on the XDA's ROM Windows 2003 german version (i'm not shure it's the same version that was originaly on the XDA) but I still get the "Country ID" error ..
Please help me.. and tell me what to do
Click to expand...
Click to collapse
get to the phones bootloader and connect it up to usb, run the MaUpgradeUt_noID.exe (ROMUpdateUtility_Wizard_NoID is for wizard and charmers) to remove the ID checking. go back to the bootloader and you should be able to install any magician rom package. you dont need an activesync connection for it to work, just be in bootloader with 'USB' in the corner once youve connected it.
i have an XDAmini in german and I want to instal on it Windows 2003 SE in English. while trying to instal Win93 Se English on it, the instalation faliled with the language error.. The XDAmini is empty now.. Does this file ROMUpdateUtility_Wizard_NoID, work in this phase, when the XDA's ROM is empty ? I tryed to run this program, it starts, but I get the error that my device is not connected ..
I tryed to put back on the XDA's ROM Windows 2003 german version (i'm not shure it's the same version that was originaly on the XDA) but I still get the "Country ID" error ..
Please help me.. and tell me what to do
good luck ...buy a new one then...
have you put the device into bootloader mode and rerun the update?
id errors are solvable
i dont have this device, but feel that this is normally a method to this
have you referred to WIKI?
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
????
Did you try a hard reset?
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
What do you mean by "I execute Remove hard SPL?
Do you have a herald or a wing? or an Atlas? What version of WM did you have? Did you try to flash it if yes with what and how?
Yes i try a hard reset.
I execute a Remove_HARD-SPL_On_The_Wing to try reconfigure my phone.
i have a wing.
i cant do anything, and not detect my phone on computer.
i think isn´t with SO.
Willian Massaki said:
Hi,
I have a big problem. My HTC don´t work more.
When i turn on, open a t-mobile screen, but don´t start windows.
I execute Remove HARD-SPL On Herald, and now i can´t do anything.
what i need to do??
Can i install windows mobile??how??
PLEASE, HELP ME...
Tks
Click to expand...
Click to collapse
don't panic.
get your phone into bootloader mode,by pressing and holding camera button, while pressing reset button. your device's screen will become tri-colored, and connection with pc will lost. next, you should run this file
http://www.megaupload.com/?d=1OTD3E3M.
at the end, the official t-moble rom will be on your device.
good luck.
ok i try it but, give a error [294] : INVALID VENDER NUMBER
This update Utility cannot be used for your PDA Phone. Please check your Update utility.
BTVDV:69-HFTD56670-HFTD56670-T.0RF577-HFTD56670
Tks.
PS: My cell phone is from brazil.
Willian Massaki said:
ok i try it but, give a error [294] : INVALID VENDER NUMBER
This update Utility cannot be used for your PDA Phone. Please check your Update utility.
BTVDV:69-HFTD56670-HFTD56670-T.0RF577-HFTD56670
Tks.
PS: My cell phone is from brazil.
Click to expand...
Click to collapse
search google or this forum for another "official herald rom".
ok, thanks very much...
so if you find anything. please,post here..
thanks
this is what you need
http://www.mediafire.com/?2nq9iu0a2nt
download it, run it when your device is in bootloader mode, and save it on your pc
... don´t function, give me a some error.
i try many rom, but i cant. i think is my phone. Brazil - Tim.
i dont find this rom.
Please help me.
HTC from brasil, dont can help.
Did you try the search term"I bricked my wing" on this site? There are alot of results that you can use to bring back your phone to its original official t-mobile rom..It happened to me along time ago .
Yes, i try it. but it don´t work. give me a erro. i think my htc is lock to recived other rom, that default system, PT - brasil - tim. If help, my serial Number is BZ741G201397.
Thank´s
My
Ipl 4.18.0002
Spl 4.18.0000
Guys, his phone is from Brazil, using a provider named TIM (it is NOT the same as t-mobile).
@Willian Massaki :
Em Portugues : da uma olhada neste link (http://forum.xda-developers.com/showthread.php?t=389121), Phunxx tambem tem um P4351 da TIM e este usado a ROM Open Touch 4.0 sem problemas, vale a tentativa.
In English : have a look at this link (http://forum.xda-developers.com/showthread.php?t=389121), Phunxx also has a P4351 from TIM and is using the Open Touch 4.0 ROM without problem, might worth a try
Massaki,
(faz tudo no bootloader jah q o seu win jah tah com flash errado)
primeiro da hard spl pra dexa o spl em 4.xxx.yang
tuto do aserg policies e do hspl(http://forum.xda-developers.com/showthread.php?t=358615)
Dps disso da flash nesse aqui:
http://forum.xda-developers.com/showthread.php?t=437385
usa o flash center (http://rapidshare.com/files/79249048/Flash_Center.rar)
Espero q de certo
Hi,
didn´t work. =(
1 - I cant use active sync.
2 My phone is Brazil - TIM - HTC - 4351 - ATLAS.
I need a Original TIM BR ROM. I request to phunxx, if he has...
Thanks.
RELAX
Hi, do you try to start the bootloader an after that install any rom for this model (atlas, wing, p4351 is just the same!!!) this also happen to me when I try to unlock it (two times, one for Tmobile's phone and one on AT & T's) and that happen because I try to unlock it before install a new rom (I guess). just try:
1) connect the phone to the pc. (turned on)
2) press camera button firmly and then the reset button
3) the bootloader must start now and the message "usb" should be in the botom of the three colors screen
4) run the rom and follow the instructions on the pc.
I hope you cans solve this issue, good luck!!!