Database Info

Some Please Help!

I tried to update my rom with a jester rom RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe i wasn't sure if i had g4 or g3 but its a newer qtek. The install finished 100 percent but my phone is stuck on 3 colour bars red green and blue, it says IPL 2.09 and SPL 2.20.001 when i plug the USB it detects it and displays USB at the bottom
CAN SOMEONE HELP!

jester rom
just reflash using an old shipped qtek rom from the ftp watch out for a 2.20 rom

Still No Luck
I just tried to flash with this rom ROM_QTEK_S200_2.20.7.34_2.47.21_2.20.7.114_WWE.zip
using this thread as a guide to repair my phone
http://forum.xda-developers.com/showthread.php?t=283245
and during the update i get a red bar at 80% and it tells me that i have the wrong nk.nbf
What else can i do?! can someone suggest another rom or something else

try this
ftp://xda:[email protected]_220734_2207114_024721_QtekWWE_Ship.exe
please tr this rom and report

Thanks for the help man! okay heres the scoop, i just tried a really old rom that used to work on my qtek s200 if you guys remember its this one: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip
The result of that was it got to 80% the bar turned red and then on the computer it told me that i had the wrong NBF file
What scares me is that this one actually used to work!
I just left the house for a while and i will try the above rom and then report back...
Does anyone have an idea why it keeps giving a red bar then saying i have the wrong NBF?...

I just tried the rom you suggested....i get a vendor id error. My qtek doesn't even know its a qtek anymore whats going on here, when i tried the above jester rom the installation completed is it possible it thinks its something else still?! please help
Also is there away to charge the phone while in the bootloader...it doesn't charge anymore and once my battery is done im stuck!

vendor is the person who sold it to you...
just get a no vendor id update tool on the ftp site under tool and replace the update tool from any rom you wanna try

turkishhusla said:
I tried to update my rom with a jester rom RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe i wasn't sure if i had g4 or g3 but its a newer qtek. The install finished 100 percent but my phone is stuck on 3 colour bars red green and blue, it says IPL 2.09 and SPL 2.20.001 when i plug the USB it detects it and displays USB at the bottom
CAN SOMEONE HELP!
Click to expand...
Click to collapse
Hi,
however im also new to upgrading etc but heve got some exprnc from forum, so what im going to suggest u may help.
Whatever u mentioned in ur first post, conclude that u had G3 prophet before flashing to Jester's -r1 for G4( it was ur unlucky mistake). Because Jesterz-r1 for G4 do not include ipl,( if u extract it using typho5.exe u find spl file with other OS,GSM,Splash etc but not ipl) thats y ur ipl remains unchanged after flashing, and ur spl changed. so for recovery first u get Jesterz -r1 for G3 from ftp and then try 2 alternative.
1)Extract Jesterz-r1-G3 using typho5 and get only OS, GSM, ExtRom portions
and dont select it ipl or spl files. After that make a fresh nk.nbf file using
nb2nbf_tornado.exe with OS,GSM and ExtRom files.(be cautious to use
nb2nbf_tornado.exe, if ur not aware of its correct use for prophet).
then flash ur device with newly created nk.nbf and Prophets RUU.
2)Just flash ur devce with Jesterz-r1-G3.
Im sure with first alternative, u wont damage ur device further, but i cant say about outcome of second alternative.
thanx
nandlal

Can someone confirm if my prophet was a g3 or g4 prior to flash? and if flashing with a g3 rom will damage my prophet further.

Your IPL/SPL ends in .001 so that means you have a G4 prophet. I have no clue if flashing with a G3 ROM will be bad.. I'm assuming it will. But I'm just a fellow newb...

turkishhusla said:
Can someone confirm if my prophet was a g3 or g4 prior to flash? and if flashing with a g3 rom will damage my prophet further.
Click to expand...
Click to collapse
Dont confuse, U had G3 Prophet before upgrade and it will remain so. For ur other question, i'v PMed u answer.
Reply as u proceed.
thanx
nandlal

problem with with 5._Underground_edition_Crossbow_ROM.exe

hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.

u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition

but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.

You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).

thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.

i-mate JAMin updating! [VENDER ID ERROR]

Hello there, my JAMin is acting weird...
the screen calibration goes off every now and then and it's driving me crazy! so I decided to do a fresh ROM update.
I'm using the i-mate offical ROM and I have the file: JAMin_Arabic_213923_2139126_022021_ship.exe downloaded from i-mate site..but I keep getting Error 294: Invaild Vender ID!!
I didn't use any cooked ROM or anything!
tried to re download the ROM file, Updating from Boot Loader, Hard Reset..nothin works!
I want to re-install the ROM, maybe I can get rid of the screen calibration issue!!
anyone has any idea what's going on?

hey people!
any ideas!

talked to i-mate support, but nothin useful they say I need to get my device checked...?
what is the reason that I can't use the JAMin ROM in my JAMin (never used a cooked ROM before!!!)

simply,the rom you are trying to update does not have the same vendor id.you phone is cid locked,and that is the reason.try some other no vendor id rom.

zeroed said:
simply,the rom you are trying to update does not have the same vendor id.you phone is cid locked,and that is the reason.try some other no vendor id rom.
Click to expand...
Click to collapse
my device is 4G and I'm using the i-mate shipped ROM
so it has to work without unlocking, right?

Stuck at bootloader

Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L

Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!

Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers

Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!

Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance

Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?

find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!

or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/

malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.

Try PDA Viet Step 1
Try PDA Viet Step 1 Temp

hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards

Try this.
If that fails post again but be more specific e.g. what did you do before this happened?

Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen

can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me

Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe

hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7

sorry i can use the link
downloading

saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.

hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me

2.58.0001
Click to expand...
Click to collapse
Never seen that before...

Problem with flashing rom

Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan

ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.

okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan

Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan