hi guys
i have an i-mate JAMin and recently i've upgraded it's rom to dopod818pro
now i can't upgrade the rom via i-mate site.the process starts, but when it reaches 95%, it stops and after some time i get an error with the code 326, which means:
ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code
Click to expand...
Click to collapse
now, how can i solve this problem? is there any way i can upgrade form the manufacturer site (i.e. clubimate.com) ? or should i let go of this luxuary?!
i really really want to put an I-MATE rom on my pda...
Hey guys, i was upgrading the new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3) when I got stuck in the process of upgrading in the Dos screen. I had to restart my device. After that it would not load after the splash screen. I did a reset again and tried to upgrade to the Original WWE Qtec rom. At 95% it stops and gives me an error that a newer NBF file is necessary. What do i do?
Try to update with "new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3)"
I am struggling with the same problem here. I can get it back to life with upgrading os gsm extensions only. But then i can not make phonecalls and not sync with active sync. Also during boor GSM version is not shown. I gave up i am going to send it back to the Oange repair centre in Holland
Edit:
I tried all the roms available. Getting allways the same error; ERROR [326]
imparator said:
I tried all the roms available. Getting allways the same error; ERROR [326]
Click to expand...
Click to collapse
Is your set G3 or G4 and if G3 is it CID locked or Not?
exxi said:
Hey guys, i was upgrading the new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3) when I got stuck in the process of upgrading in the Dos screen. I had to restart my device. After that it would not load after the splash screen. I did a reset again and tried to upgrade to the Original WWE Qtec rom. At 95% it stops and gives me an error that a newer NBF file is necessary. What do i do?
Click to expand...
Click to collapse
try going to this ROM using the no ID utility upater I think it's in this folder
extract all the files in RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe to one folder and then replace the ROMUpdateUtility-NoVendorID.zip to the olde folder, and then run it and update the ROM
when i upgrade [loading rom] WM6 version "FantasticMobiz_v1.1i" my battery crash down.....
then i charge battery .... and start o2
i got to bootloader with screening ....
RUU
IPL 2.15.001
SPL 2.20.001
USB
... then i decided to load original ROM "RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship"
at 80% of loading it will stop at 1 minute with red strip then continue to 95% and then again stopped with error : Invalid Command : this rom is not for this pda
this type of error usually not occurs.......
this error code have solution....
go to customer service center and get new flash rom code....
but i don't know that what is new code rom.....
Can anyone help me.....
email : [email protected]
test with a nvid rom
checked..,.
i checked with NVID ROM
still have same problem....
you gotta remove the IPL/SPL for NVID,as the rom has the IPL/SPL installer itself..
the solution is:
recook the NVID ROM.
how? :
visit www.molski.biz
then look for "cook your own ROM".
the instructions are out there.
there is nothing but Radio Rom Problem.... solved
hi guy,
i solved this problem....
so thread is close...d.
thanks for suggestion.
Hi snggwt
How did you solved, could you explain us, I am having the same problem.
thnx
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
I have upgraded my qtek 8310imate SP5 from WM5 to wm6.1 following the instructions
in these forums:
http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
and
http://www.nonsolotelefonia.com/index.php?showtopic=33754&hl=sp5
rom using the WM6 by nitrogen: nitrogen
after you upgrade your phone, I will restart in Safe Mode boot as if it were not installed nothing showing + screen with three colors.
trying other rom me error [294]: invalid vender id
how can I fix it?
You probably didn't do super cid. You now need to flash the original rom, supercid and install the rom you want.
now the phone does not turn and even then I can not install any rom ...
how can I do? I do not want to throw away because I just bought
sorry for English
Where can I find the original rom Dangaard?
For original rom of imate devices try at ftp.clubimate.com
Unfortunately, none of these rom is fine by me on all invalid vender id......
there are no others in the space of the original?
I finally found the original rom
here: http://bbs.koxo.cn/viewthread.php?tid=2428