Database Info

Rom upgrade problems, HELP Please.

I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.

no radio-stack after rom-upgrade

Hi!
It's the first time I'm posting here, but after some days of search, I've found a lot about upgrading / downgrading, but nothing about my problem.
I've an MDAcompact / T-Mobile PM10A / Austria and tried to upgrade to BigStorage-Rom according this thread: " Magician to 1.13 + 1.13 Radio + BigStorage ALL-IN-ONE Guide ". I've backed up my original Rom, but after the flash, there was no radio-stack at all (booting device: "no GSM" on display).
I've tried to update the radio-stack again - error message: 114 - error upgrading radio-stack, the same with 1.12 and 1.13. I've tried to downgrade the rom to 1.12 - ok, but no radio-stack. I've tried to restore the original Rom via SD-card in bootloader-mode - device says: not allowed.
Can anyone help me?
Thanks in advance!

did u try to use an origional rom? i mean a non Bigstorage rom upgrade ? because that should fix the problem ( atleast i think it shoud)
Try Downloading the origional t-mobile1.13 rom and upgrade ur device using that install file . If i am not mistaken the first thing that is upgraded is ur radio stack then the extended rom and finally the operating sytem ( if u upgraded u would see that it does it in 3 steps).

I've tried that. As soon, as I upgraded to the original rom from T-Mobile, it stopped at the radiostack-upgrade. After that, I opened the "original".exe-file from T-Mobile with winrar and tried to upgrade again, but without the "radio.nbf"-file, what was no problem. After that, I tried to update with the "radio.nbf"-file (stand alone) again, but the "error 114"-statement came up again.

I got this error before, but only because I flashed my device with the wrong ROM.
(...I once misread "Universal" as a meaning and not as a device codename, and flashed the wrong Radio stack. Thing worked, but radio invalid, no phone capabilities. Fortunately, a reflash with the correct radio ROM found here saved me. And my $300 investment. -.-)
Either the radio part of the ROM's accidentially corrupted (download again), or the radio driver is incompatible with your device hardware. I'm not aware of Minis being avaliable in anything other than GSM tho...

I downloaded the original rom-version from the official T-Mobile website. Fact was: up/downgrade of the rom itself "ms_.nbf/nk.nbf" no problem (I've extracted the exe-file via winrar to a folder and made that several times to up/downgrade), but update of the radio-stack "radio_.nbf" not possible, ended in error 114. The point is: as soon as I start the update-utility, it shows the "Device CE Image version", "Device Extended Image Version" but no "Device Radio Image Version", it looks like no radio-stack is installed at all.

I got that exact same error through the aforementioned Universal ROM debacle (-.-). Radio failed to flash, no radio at all.
There should be a standalone radio stack somewhere in the FTP for magician. I know I saved mine with the 1.12.00 version. Try flashing with that, there's a file inside that allows you to bypass the version detection IIRC (which allows a from-scratch flash). Flashing a standalone radio stack will hard reset your system, but otherwise will not touch anything else.

I need an expert here, its different this time, Stuck in bootloader..

Hey guys, i was upgrading the new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3) when I got stuck in the process of upgrading in the Dos screen. I had to restart my device. After that it would not load after the splash screen. I did a reset again and tried to upgrade to the Original WWE Qtec rom. At 95% it stops and gives me an error that a newer NBF file is necessary. What do i do?

Try to update with "new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3)"

I am struggling with the same problem here. I can get it back to life with upgrading os gsm extensions only. But then i can not make phonecalls and not sync with active sync. Also during boor GSM version is not shown. I gave up i am going to send it back to the Oange repair centre in Holland
Edit:
I tried all the roms available. Getting allways the same error; ERROR [326]

imparator said:
I tried all the roms available. Getting allways the same error; ERROR [326]
Click to expand...
Click to collapse
Is your set G3 or G4 and if G3 is it CID locked or Not?

exxi said:
Hey guys, i was upgrading the new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3) when I got stuck in the process of upgrading in the Dos screen. I had to restart my device. After that it would not load after the splash screen. I did a reset again and tried to upgrade to the Original WWE Qtec rom. At 95% it stops and gives me an error that a newer NBF file is necessary. What do i do?
Click to expand...
Click to collapse
try going to this ROM using the no ID utility upater I think it's in this folder
extract all the files in RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe to one folder and then replace the ROMUpdateUtility-NoVendorID.zip to the olde folder, and then run it and update the ROM

i-mate JAMin updating! [VENDER ID ERROR]

Hello there, my JAMin is acting weird...
the screen calibration goes off every now and then and it's driving me crazy! so I decided to do a fresh ROM update.
I'm using the i-mate offical ROM and I have the file: JAMin_Arabic_213923_2139126_022021_ship.exe downloaded from i-mate site..but I keep getting Error 294: Invaild Vender ID!!
I didn't use any cooked ROM or anything!
tried to re download the ROM file, Updating from Boot Loader, Hard Reset..nothin works!
I want to re-install the ROM, maybe I can get rid of the screen calibration issue!!
anyone has any idea what's going on?

hey people!
any ideas!

talked to i-mate support, but nothin useful they say I need to get my device checked...?
what is the reason that I can't use the JAMin ROM in my JAMin (never used a cooked ROM before!!!)

simply,the rom you are trying to update does not have the same vendor id.you phone is cid locked,and that is the reason.try some other no vendor id rom.

zeroed said:
simply,the rom you are trying to update does not have the same vendor id.you phone is cid locked,and that is the reason.try some other no vendor id rom.
Click to expand...
Click to collapse
my device is 4G and I'm using the i-mate shipped ROM
so it has to work without unlocking, right?

Stuck at bootloader

Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L

Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!

Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers

Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!

Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance

Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?

find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!

or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/

malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.

Try PDA Viet Step 1
Try PDA Viet Step 1 Temp

hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards

Try this.
If that fails post again but be more specific e.g. what did you do before this happened?

Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen

can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me

Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe

hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7

sorry i can use the link
downloading

saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.

hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me

2.58.0001
Click to expand...
Click to collapse
Never seen that before...