Hi, i post my problem in several threads, with no luck.
Device: v 1615/kaiser
Description of wifi connection problem:
I flash Dutty's Diamond V1 Build 19588, radio 1.58.25.17 and HSPL 3.28, all work nice and fast except wifi. I have home wireless network and cant connect. Signal is full and network is available, but when i try to connect, after 4-5 sec network become unvailable and after 10sec available again (full signal)!? Network is open, data encription disabled, networ adapter is on server assigned IP address,...I check The WLAN key end in \TNETW12511...
I try with L26 v8 rom with no success and i try several radios but no luck. On the end i try with diferent SPL but again...
Now i begin to suspecct on hardware failure (but i recive signal!). Im desperate, please HELP! All other devices (netebook, iphone<-my wife, nokia n82...) working fine.
Now im with: Dutty's Diamond V1 Build 19588, 1.65.16.25 radio, SPL 3.28 and protocol: 25.83.40.02W (I know about radios and roms, but what exactly does a protocol do?(cant find on wiki anything)). I read carefully all thread linked with flasing (roms, radios, spl...) and try to find something similarly to my problem but i faild. If you need more info, please ask for.
P.S.
After all trouble to make tytn2 fast and reliably device i have this headache
THANK YOU!
maleksa said:
Hi, i post my problem in several threads, with no luck.
Device: v 1615/kaiser
Description of wifi connection problem:
I flash Dutty's Diamond V1 Build 19588, radio 1.58.25.17 and HSPL 3.28, all work nice and fast except wifi. I have home wireless network and cant connect. Signal is full and network is available, but when i try to connect, after 4-5 sec network become unvailable and after 10sec available again (full signal)!? Network is open, data encription disabled, networ adapter is on server assigned IP address,...I check The WLAN key end in \TNETW12511...
I try with L26 v8 rom with no success and i try several radios but no luck. On the end i try with diferent SPL but again...
Now i begin to suspecct on hardware failure (but i recive signal!). Im desperate, please HELP! All other devices (netebook, iphone<-my wife, nokia n82...) working fine.
Now im with: Dutty's Diamond V1 Build 19588, 1.65.16.25 radio, SPL 3.28 and protocol: 25.83.40.02W (I know about radios and roms, but what exactly does a protocol do?(cant find on wiki anything)). I read carefully all thread linked with flasing (roms, radios, spl...) and try to find something similarly to my problem but i faild. If you need more info, please ask for.
P.S.
After all trouble to make tytn2 fast and reliably device i have this headache
THANK YOU!
Click to expand...
Click to collapse
Have you changed the WLAN power mode settings to Best Performance and tried that? Give that a shot and see if it fixes the issue.
Settings -> Connections -> Wireless LAN -> Power Mode set to Best Performance.
Maleksa,
were you running HSPL 3.28 before you flashed Dutty's ROM and if so which rom were you running before that it worked?
I had a similar problem and i fixed it by, unfortunately, reverting back to OEM status (AT&T Tilt) with the original SPL and then WiFi worked for me. I was then able to put on the new HSPL 3.29 and flash to Death ROM. all worked out well.
Give it a shot and let me know.
futbolkeeper said:
Have you changed the WLAN power mode settings to Best Performance and tried that? Give that a shot and see if it fixes the issue.
Settings -> Connections -> Wireless LAN -> Power Mode set to Best Performance.
Click to expand...
Click to collapse
Yes but with no succes
futbolkeeper said:
Have you changed the WLAN power mode settings to Best Performance and tried that? Give that a shot and see if it fixes the issue.
Settings -> Connections -> Wireless LAN -> Power Mode set to Best Performance.
Click to expand...
Click to collapse
Yes, but with no succes
otherreligion said:
Maleksa,
were you running HSPL 3.28 before you flashed Dutty's ROM and if so which rom were you running before that it worked?
I had a similar problem and i fixed it by, unfortunately, reverting back to OEM status (AT&T Tilt) with the original SPL and then WiFi worked for me. I was then able to put on the new HSPL 3.29 and flash to Death ROM. all worked out well.
Give it a shot and let me know.
Click to expand...
Click to collapse
Ok, ill try, just need time to find Vodafone rom and original SPL.
If you are using Vodafone you should be able to use the HTC OEM everything you need is right here: http://forum.xda-developers.com/showthread.php?t=335568
You are the BEST!!!
THANK YOU!!!
Now im going on new rom with hope that wifi connection will still work!
OMG!
This is not happening, i flash Dutty's Diamond V1 Build 19588 with 1.58.25.17 radio and again cant connect to my wireless network! I dont know what now i can do!
HELP!
maleksa said:
OMG!
This is not happening, i flash Dutty's Diamond V1 Build 19588 with 1.58.25.17 radio and again cant connect to my wireless network! I dont know what now i can do!
HELP!
Click to expand...
Click to collapse
I'm flashing to that ROM now let me try it and i'll get back to you
otherreligion said:
I'm flashing to that ROM now let me try it and i'll get back to you
Click to expand...
Click to collapse
Thanks, i must now go to sleep 2:15am <---
i'll be back in 12h (sleep, work,...xda )
maleksa said:
Thanks, i must now go to sleep 2:15am <---
i'll be back in 12h (sleep, work,...xda )
Click to expand...
Click to collapse
Hey bud i'm sorry but i don't have that issue. i was on my network and working just fine. no disconnects. I don't know what to tell you go back to the OEM rom and then try a different ROM and see if it happens to you on that ROM.
looks like the only problems left should be either your wireless router or your phone. Try using your phone on a different wireless router and see if it works. A default shipped rom should have all the defaults to just connect with a router.
thomassster said:
looks like the only problems left should be either your wireless router or your phone. Try using your phone on a different wireless router and see if it works. A default shipped rom should have all the defaults to just connect with a router.
Click to expand...
Click to collapse
I already try, and result is like on my home network.
Maleksa,
try to reset your router and cable modem then connecting with your phone. I would also try to change the broadcasting channel on the router from 1 through 11. If it works then you can security lock to just leave it open while disabling broadcasting the SSID.
Lemme know if have tested any of that or if it will work for you.
blogzter said:
Maleksa,
try to reset your router and cable modem then connecting with your phone. I would also try to change the broadcasting channel on the router from 1 through 11. If it works then you can security lock to just leave it open while disabling broadcasting the SSID.
Lemme know if have tested any of that or if it will work for you.
Click to expand...
Click to collapse
I reset router but no change and ill try with changing broadcasting shanell on router (if that succes ill be happy) but i need device with capability to connect on eny hot spot (work, going on vacation,...)
WEP or WPA?
Are you using any sort of encryption key for your router? If you are, try turning it off and troubleshoot without. I've seen some laptops with WiFi exhibit this same symptom.
Hi Maleksa,
This may be a bit of a long shot but recently I had EXACTLY the same problem as yours. The problem lay with my router. Following a firmware update of my inventel router (Supplied by Orange , UK ) a new security measure had been introduced. In order to connect my TyTN II I had to first enter "Pairing Mode" on the router. As you don't seem to have mentioned what router you are using I thought it was worth mentioning. Anyway, good luck sorting this problem out.
L1Wulf said:
Are you using any sort of encryption key for your router? If you are, try turning it off and troubleshoot without. I've seen some laptops with WiFi exhibit this same symptom.
Click to expand...
Click to collapse
Nop, no enryption at all. All my rest devices working fine.
Earthworm said:
Hi Maleksa,
This may be a bit of a long shot but recently I had EXACTLY the same problem as yours. The problem lay with my router. Following a firmware update of my inventel router (Supplied by Orange , UK ) a new security measure had been introduced. In order to connect my TyTN II I had to first enter "Pairing Mode" on the router. As you don't seem to have mentioned what router you are using I thought it was worth mentioning. Anyway, good luck sorting this problem out.
Click to expand...
Click to collapse
I think i dont have problem with router, all my rest devices working fine and i have problem to connect on hot spots, work,...And when i flash with OEM ROM i manege to connect on home network!
Related
Hello,
I have trouble to get my internet connection work. Normally i go to Start->Settings->Connections->Connections and rightclick on the existing connection.. Then my PDA connects. But after upgrading to WM6 my PDA does nothing.. I tried to execute welcome.exe again ( maybe two missing files) but this didn't work for me...The Settings for the connection are the same as i have used with WM5.
Pleaaase help me ? anybody?
Thanx
I found that if I have GPRS running with the Smart1 Rom, and I then disconnect it, I can only get it to reconnect by either soft-resetting the phone or toggling flight mode on and off. Did you hard reset your prophet after flashing the WM6 ROM?
WM6, Ie, GPRS
Yes, i made hard resets for several times now, but the internet connection doessn't work. Maybe a language problem?
NeoDoedl said:
Yes, i made hard resets for several times now, but the internet connection doessn't work. Maybe a language problem?
Click to expand...
Click to collapse
Do you guys only get a "x" at the GPRS icon? I have run cabs to install network setting of my carrier correctly, but still unable to connect to the internet via GPRS. no matter using IE or MSN or or Worldmate
Nope.. My Device doesn't do anything at all. Normally i would get this message that my device is connecting. but i do not even get an error message. The same situation when i try to send/receive Emails...
???! quite annoying..'cause my settings ( proxy, Accesspointname etc. is 100% correct, because this are the settings that would work for WM5..
NeoDoedl said:
Nope.. My Device doesn't do anything at all. Normally i would get this message that my device is connecting. but i do not even get an error message. The same situation when i try to send/receive Emails...
???! quite annoying..'cause my settings ( proxy, Accesspointname etc. is 100% correct, because this are the settings that would work for WM5..
Click to expand...
Click to collapse
This is the same situation that I mentioned. Don't know how to fix on this Smart1 NEW rom v1.
So it seems to be a Bug.. I hope it will be fixed in further release. I am wondering that nobody else have this problem ?? I found this: http://forum.xda-developers.com/showthread.php?t=299023, so i guess that my Network (O2) does not have a 100% functionallity..
Additionally i' ve tried the AKU 3.3 ASERG Rom. Here the Inet Connection works, but the ROm doesn't have this Look&Feel of WM6.. The Today Skin is like on WM5 ...maybe this can be improved?
WIFI problems after ROM update on ATT tilt
After installing the official ATT ROM update (1.62.502.0) on my ATT tilt I have
wifi problems. This was not present before installing the ROM update.
I can connect just fine to all access points with the comm mananger. However, when I try
to browse the internet, I get the message "Page cannot be found. Please check spelling and
try again". I get this message with all with web sites.
I know there's something wrong because this happens even on unsecured networks like airports,
coffee shops etc. Other programs needing internet acces don't work either (like the
weather update, Quick GPS etc)
Before you ask ... Yes, I have searched extensively before posting.
Okay, now that that's out of the way...
I noticied that others have experienced the same problem and I did found several suggestions
however none of these work . This is what I have tried until now:
- hard reset (1234) and soft reset
- flashed the ROM again
- flashed other roms
- flashed an other radio sign
- deleted the temporary internet files
- changed the browser settings
- disable / able proxy settings
- run again welcome.exe in the /windows directory
- refresch in PIE
- restored a sprite backup
Here are some (but not all) of the URL's where I found these 'solutions':
https://cingular.atgnow.com/cng/tutorials/KB71396.html
http://forums.cingular.com/cng/board/message?board.id=cingular&thread.id=70500
http://forums.cingular.com/cng/boar...thread.id=39752&view=by_date_ascending&page=1
https://cingular.atgnow.com/cng/tutorials/KB84444.html
None of all this worked ...
I have been searching for days (and nights) now ... It's driving me crazy ...
especially beacuse the new ROM should provide 'more stability' accordingly to the HTC website ...
For me this new ROM only caused problems .....
Please help me.
Thank you, yours,
Frank
2nded for some interest... for what it's worth I'm runnin dutty's 4/29 rom. tried a couple radios no solution.
the only prob i have is that i cant connect to my homes wifi router..i can connect to any other wifi router...it used to work with previous rom but all the lastest roms i cant get it to browse the internet
volcom.. do me a favor... turn off your cell radio and try to connect to the internet using your home wifi router.. let me know what happens
ericmcintire said:
volcom.. do me a favor... turn off your cell radio and try to connect to the internet using your home wifi router.. let me know what happens
Click to expand...
Click to collapse
sure thing....trying right now...
nothing.....just says locating
ive posted about this several times and most of the time no one comments i have tried different sites and a few different routers with no luck except with laurentius's rom
volcomnator999 said:
sure thing....trying right now...
nothing.....just says locating
Click to expand...
Click to collapse
weird.. I was in a spot where I had zero service and I connected to my wifi and it worked and it's been working ever since.
Something similar happened to me while trying ROMs, the 1.65.XX.XX radios do not work well with my WiFi router, it connects and gets an IP but does not transfer packets, after 2 minutes or so of trying you can access a page, but then it fails again, etc
This happens with 1.65.14.06 and 1.65.20.29 radios.
I'm running 1.65.16.25 radio now and it works well, GPS fix is fast, WiFi connection works, 3G and HSDPA work,
You guys might need to put the power mode of the wifi to performance. This is under settings.
SH4YD33 said:
You guys might need to put the power mode of the wifi to performance. This is under settings.
Click to expand...
Click to collapse
Yes I know there's that setting. But I tested 1.65 radios while seated at 10 feet from my WiFi router and in direct line of sight. Radio 1.58.26.20 has very fast GPS fix, and connects perfectly to my router.
Radio 1.65.14.06 does not work well in any of those cases. Even if increasing the power of the WiFi solved the problem, it's much convenient to just flash another radio.
Hi,
i am having T-mobile MDA brought from US by my brother. recently i upgraded to WM5 2.26 and suddenly found that my wi-fi not turning on after the upgrade. when i switc it on, it tries to switch on for seconds and suddenly switches off. i am able to see the wi-fi adapter SDIO WLAN wireless adapter in the list of network cards available. but even trying for many options of changing the settings for this, i am unable to switch on the wi-fi(WLAN) in the COMM manager. i have tried upgrading to wm6 professional(TNT_5.0_Wizard_TouchFLO) got from this site. no use. It is still not turning on. I have tried hard resetting and other stuffs. no clue. All other operations seem to work fine.
Please any one help me to correct this.
My MDA config:
ipl 2.26
spl 2.26
gsm 2.47.11
os 6.0.0.0
Thanks in advance,
VM Karthik Kumar
I noticed the same problem and all I simply had to do was turn the wifi on again and it stayed. Not a solution but it's what worked. Hope it helps.
oneybm said:
I noticed the same problem and all I simply had to do was turn the wifi on again and it stayed. Not a solution but it's what worked. Hope it helps.
Click to expand...
Click to collapse
yeah same here but also tried hard reset and used to start via creating a shortcut made by me from windows directory.it worked but com manager wont work otherwise
I had alot of problems with WIFI, I had to turn it on then off then on again for it to work. Then I found this file to replace a DLL and it works great!
Just copy the DLL file to your windows folder then do a soft reset.
Will try and come back!
Hi guys thanks for the solutions. I have already tried all the options available in this forum for wi-fi,
Joe! let me try copying the dll you have attached to my mobile and see what happens.
will come back with the updates.(Hope to get resolved)
Thanks for all the guys in help.
vmkarthik
it did not help! problem still persists!
Hi,
i tried installing the wifi fix in my mda and have done soft reset and still found wi-fi not turning on. I have even switched the MDA off and restarted again and tested. it doesn't work.
Any other option to solve this.
Also i am not able to see any mac address or other settings in wi-fi settings. everything is empty. i can't key in any ips too.
Help me if possible...
vmkarthik
my Wifi wouldn't turn on in the last couple of days. I found that it was because I set up overclocking with omapclock plus.
hi everybody! finally i got this wonderful mobile phone! i'm just disappointed by the fact i can't connect to any wireless network... not even mine, which is proprly configured... i can obtain the list of all the networks, i see if they are free, if they are encrypted and so on, but when i try to connect to mine or the free ones appears "connecting..." and then it skips this connection and try with the following one... how comes it does so? i tried with different versions of OSs but it's always the same issue... i also disassembled it and everything is it its place... can anyone help me please? thanks
Welcome to forums
Yes, you have one of the best devices ever made!
Try a hard reset or reflash another ROM
Here instructions:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
already tried, but nothing... i tried to use the tomal one, the italian one and the chinese one... but it's not working... do u have any idea why? in my opinion the hardware it's fine, as long as it can see the networks the wifi is working. but the software is not responsible because i tried 3 different roms and it's always the same... i really can't imagine where could be the cause...
Try to do A doc format
what do you mean?
EDIT: now i read about it, i already did it and i'm flashing right now!
EDIT 2: No, it's not working... always showing "connecting" but then just goes back to "available" status for the network, it just does not work...
tetora said:
what do you mean?
EDIT: now i read about it, i already did it and i'm flashing right now!
EDIT 2: No, it's not working... always showing "connecting" but then just goes back to "available" status for the network, it just does not work...
Click to expand...
Click to collapse
OK one thing you should notice is Universal is only capable b class of wireless so.. and see what class of wifi modem you have and try to install following cab (which i got from Jonny) it should make it capable of wifi b and g and see if problem still presists try another wifi modem and still same then i suspect it might be hardware issue....
also, isn't the radio responsible for wifi connection? perhaps try a different radio?
mine is b/g both active... i'll try that rajivshahi!
@jonny: i both tried .18 and .15... should i try the previous ones?
EDIT: I tried installing that .cab, but it's not working... do i have to do something in particular after installing it? what do you mean by hardware issue? what could be wrong with it if i see the networks?
tetora said:
mine is b/g both active... i'll try that rajivshahi!
@jonny: i both tried .18 and .15... should i try the previous ones?
EDIT: I tried installing that .cab, but it's not working... do i have to do something in particular after installing it? what do you mean by hardware issue? what could be wrong with it if i see the networks?
Click to expand...
Click to collapse
the cab just creates a some registry. so try to connect to other modem and see... if everything fail then it might be issue with uni's hardware... as if it was software issue flashing to another rom and another radio should fix it...
just a quick question.... does it connect to a open network or is it just the encrypted oneş.... i cant connect to any other than a WEP network...???
Try this (Configure Wireless Network, DON'T activate "This is a hidden network")
tetora said:
hi everybody! finally i got this wonderful mobile phone! i'm just disappointed by the fact i can't connect to any wireless network... not even mine, which is proprly configured... i can obtain the list of all the networks, i see if they are free, if they are encrypted and so on, but when i try to connect to mine or the free ones appears "connecting..." and then it skips this connection and try with the following one... how comes it does so? i tried with different versions of OSs but it's always the same issue... i also disassembled it and everything is it its place... can anyone help me please? thanks
Click to expand...
Click to collapse
Maybe this will help:
In my case, after a hardreset, I cannot connect to a Wi-Fi Network until I do the following.
1.Turn on Wi-Fi--> when your network shows up, enter the Network key and hit "Connect". (Here is, where the device tries to connect, but does not! IS THIS YOUR CASE?)
2.Go to Wi-Fi-settings (through the Communications-Manager) --> push and hold your finger on your network to open the context menu --> select "edit".
3.At the "Configure Wireless Network" page make sure the check for "This is a hidden network" is NOT set! --> Hit "Next".
4.At the "Configure Network Authentication" choose for Authentication "WPA-PSK" and for Data Encryption: "TKIP". (Make sure the Network key is entered.) Hit "Next" and then "Finish."
Again your device will try connecting and (hopefully ) be successful!
Cheers,
mdajj
---------
HTC-Universal
ROM: Tomal v10 WM6.5 Build 5.2.21872 (http://forum.xda-developers.com/showthread.php?t=573739)
RAM: 64MB
Radio: 1.18
Welcome aboard
Thanks for that tip, hope can solve the issues some members reported
the point is that i can't connect to open networks... now i don't have any encrypted networks i can access... and i tried to set the networks as not hidden, bit it's not working... mdajj got exactly what happens to me "hit "Connect": here is, where the device tries to connect, but does not!" and it shows directly "unavailable status for the network, while the router is on the same desk i am sitting in front of. T_T
now i start thinking that the uni can connect only to encrypted netwoks... how could it be? i bought it because of the opposite reason...
Wifi cannot connect if signal is too low.
Unmount the device, check the wifi/antenna connection and make sure that it is not getting touched with other assembly...
i already did it, and i checked again today, the antenna is fine it does not touch anything and its shape is perfect... BUT today i noticed something missing, i have no idea why i never noticed before... the conductive tapes are missing, but even if they were in place, they'd not touch the antenna, so i guess it's not a problem... am i right?
wifi connection problems
Can I suggest a non technical approach. I also had a lot of problems with wifi a couple of years ago, it turned out to be the BATTERY I had a noname battery from Hong Kong that I think just wasn't generating enough power. The phone and everything seemed to work fine except for wifi. When I replaced the battery wifi suddenly worked perfectly. If you know anyone else with a Uni that works on wifi swap the battery and give it a try.
i also thought about that, but even when the power supply is connected to the phone wifi does not work... and then i have 2 batteries, one is not original, Yaobao brand, and the other one seems to be original, but with both does not work... [both 1620mAh]
Thinking about this, I don't know whether this is relavent, or simply an earth... but the original battery has metal case (or partially), which has a contact pressed to it when inserted in Uni. I have replacement batteries with solely plastic cases, so the contact isn't made. This doesn't affect my wifi, but it's just a thought.
yea, u r right, i did not noticed before... i have both kind of batteries, with one it makes contact, with the other it doesn't... and it's still not working! by the way thanks for the help!
tetora said:
yea, u r right, i did not noticed before... i have both kind of batteries, with one it makes contact, with the other it doesn't... and it's still not working! by the way thanks for the help!
Click to expand...
Click to collapse
Blow some hot air around the board (if you have a hot-air-station). This is the last thing you can try.
Hi Guys. You are the only hope for me to resolve the problem with WiFi on my device.
So the situation is: I received Motorola Defy with Android 2.2.2 on board not from a shop. This device was already hacked a little (root, localization etc..)
So I decided to flash CM 7 on it
I did everything as described in instruction. But after I have flashed this device I found that WiFi does not work. It began to work after flashing for a small period but then it stopped working
Device successfully connects to wifi, receives IP address but no application can connect to Internet. I tried to install some WiFi programs to try to resolve this problem, tried to switch wifi mode on my router (WPA2 AES/TKIP, WEP, no security at all) that did not help
Even pinging my router gives me "request timed out"
I wonder can I somehow investigate deeper into this problem to find solution for my problem? Or this bug cannot be resolved?
No any suggestions?
I would suppose that posting at the CM7 post at http://forum.xda-developers.com/showthread.php?t=1033654 would be more useful.
Some people say that they have wifi problems
Click to expand...
Click to collapse
Sorry I could not be of greater help. =(
matthew5025 said:
I would suppose that posting at the CM7 post at http://forum.xda-developers.com/showthread.php?t=1033654 would be more useful.
Sorry I could not be of greater help. =(
Click to expand...
Click to collapse
I tried to, but I couldn't
New members (those with fewer than 10 posts) are not permitted to post to development-related forums
To ask Questions about developing your device, installing ROMs, software and themes you must go to the Q&A or General Forum.
Click to expand...
Click to collapse
Ah yes...
Anyway wifi is a known issue. Doubt posting would do you much good though.
I suppose it is just best for you to wait for it to be fixed. =(
What's your phones MAC addres? It's there in WiFi settongs somewhere chances are its not a real MAC addy and your router doesn't like it, I thought that issue had been resolved just try a different Rom
Sent from my HTC HD2 using Tapatalk
No
I do not think that my router blocks my phone by mac address as if I use froyo 2.2.2 wifi works perect.
BTW if i use CM7 wifi also ok. I mean connection to my router. Phone receives ip address and this is OK. But internet connection is available only several minutes after flashing the phone. Then I cannot even ping anything from my android terminal
Exactly,
I have wifi issue on my latest 7.2 nightly build, too.
So, it looks like, phone wants to connect to saved connections (wifi status is connecting), but there should be status "searching", and stays on status Disconnected. Pushing Search button, do nothing.
When I delete few saved connections, wifi could do "search", and after that, i can connect!.
I think, there is critical numer of saved connections, when it is riched, then wifi can't do search, and connect to any host.
Try Airplane mode
Hi. For me going to airplane brought wi-fi back to life, and it stayed alive after turning all radios back on. Hope it works for you.
Check you WepKey, It is often that