I decided to flash Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 and hope for better battery management and before I went to change the radio rom it said that I should install hardspl so I downloaded it and in the middle of installing it it fails and i have tried twice now.
Am I doing something wrong? I'm a newb at flashing roms so pardon me.
Please post in the sticky thread:
http://forum.xda-developers.com/showthread.php?t=396922
And be very very descriptive about what exactly you are doing and how exactly it is failing.
please post this issue in the hardspl 3.28 thread, and provide a little more details
Related
Hi all,
I am having troubles updating my radio rom. This device has been a beta pre lease.
Current version is:
R: 0.24.00.05 (believe it or not...)
G: 22.23.40.00H
D: 1.56.00.00
I was able to load the kaiser cooked rom (but radio and camara are not working properly). I have Hard SPL for Kaiser loaded.
I've tried many roms, but they all fail at 95% with error [262]. And then I have to reload the cooked rom to get the system working again.
Anyone any suggestions?
Jeroen
do you have a Kaiser?
I don't think that is the correct radio for Kaiser ROMs. If so there may be special stuff cooked into the original ROM, just like the ATT Roms which use a specific radio.
read the sticky regarding radio's.
Yes, I have a Kaiser (loaded S.N.E. cooked rom)
apposite said:
I don't think that is the correct radio for Kaiser ROMs. If so there may be special stuff cooked into the original ROM, just like the ATT Roms which use a specific radio.
read the sticky regarding radio's.
Click to expand...
Click to collapse
I'll look some more in the sticky's about radio's.
Thanks,
Jeroen
(loaded this rom: http://forum.xda-developers.com/showthread.php?t=357274)
that is not a Kaiser rom!! I'm surprised you didnt brick your device lol! Make sure your trying to flash a Kaiser RUU_signed.nbh that has only a OS.nb inside and then flash the radio.nb later...
read your reply
the link you provided to the "no evil" rom doesn't mention anywhere in the thread about the radio you are using. where did you get it?
recommended by thread author - radio 1.27.12.17
bought device on ebay
I know the radio is not compatible with the rom. That is why I want to update the radio.
It is just that the radio flash process hangs at 95%.
Best regards,
Jeroen
problem solved
At this location ftp://ftp.xda-developers.com/Uploads/Kaiser/Radio/ I found a rom similar to the existing in my device: 0.26.07.06. This one worked, and afther that I was able to flash the version I wanted: 1.27.12.11.
I'm happy. My device is up to date and very quick with Alex's Utra clean rom!
Thanks for listening!
Jeroen
hmmmmmmmmmm
try a hard reset and flash before you customize (upon initial bootup) - maybe???
I have an AT&T Tilt and would like to flash the firmware to the HyperDragon III which can be found in this thread.
http://forum.xda-developers.com/showthread.php?t=397121
Following the directions in the TILT Specific Wiki, I flashed the HardSPL which was version 1.57.502.2. This was the file listed in the thread for the TILT.
Checking out the other threads in this forum, it looks like there are now HardSPL version in the 3 range like 3.07 3.28 3.29.
I'm confused if the file listed on the TILT Wiki was correct or if I actually need a different HardSPL file.
My other question is about Radio. I have read all the information about making sure that the radio on my phone will work with the rom that I would like to install.
What I cant seem to find though is how to check what radio my phone is currently using ?
Any help on this would be appreciated.
I know that answers are probably in the forum somewhere I just can't seem to find the right search string to pull it up.
Use the HardSPL found here: http://forum.xda-developers.com/showthread.php?t=396922 (this is a sticky on the ROM dev page).
Here is a guide for Radios: http://forum.xda-developers.com/showthread.php?t=393182 - basically flash a radio onto your device and test it out. Different radios will give you better/worse battery life, affect connectivity, GPS, and the like. Performance varies by region and what ROM you have installed.
Here is another link you may find useful: http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Hope this helps.
So the newer versions of the HardSPL have the same benefits as the one I installed said it did ? Such as being able to go back to older, original roms and helping to protect against bricking ?
QuantamPulse said:
So the newer versions of the HardSPL have the same benefits as the one I installed said it did ? Such as being able to go back to older, original roms and helping to protect against bricking ?
Click to expand...
Click to collapse
The 3.* versions of Hard Spl do the same as the 1.* versions - they allow you to flash cooked Roms. The 3.* have better compatability with WM6.1 than the 1.* versions, thats all.
Ta
Dave
Another question, I am trying to flash the new 3.56 HardSPL before installing the new Rom.
Do I need to use the SoftSPL even though I already have the 1.5x HardSPL installed or can I just run the update like normal.
Also, when trying to run the update like normal using the KaiserCustom RUU File, I run through the wizard and after getting my phone information it correctly shows that I currently have 1.5x, however it says that I will be updating to 1.00.000.0
Is this normal ? Or should it actually show that it is updating to 3.56 ?
yes thats normal one quick thing search for jockeys security unlocker that has saved many headaches
youtube solution
Hi, the youtube video below walks you through it
http://www.youtube.com/watch?v=ezZ-2lHi3T8&NR=1
hi
i just tried to go from 3.56 to 3.29 SPL
i did everything like i all ways do but i think after everything i did
it didn't do any thing, and im still with the 3.56SPL
is their a way to chack what spl is running on my kaiser now?
(i used sspl-kais and after that i flashed the 3.29)
danny
speebman said:
hi
i just tried to go from 3.56 to 3.29 SPL
i did everything like i all ways do but i think after everything i did
it didn't do any thing, and im still with the 3.56SPL
is their a way to chack what spl is running on my kaiser now?
(i used sspl-kais and after that i flashed the 3.29)
danny
Click to expand...
Click to collapse
In the 3.* HardSPL thread there are two methods by Kyphur, try the second one - exactly as stated.
Please post any other problems in that thread.
@Mods, close this.
Ta
Dave
Closing Thread.
Please post in the corresponding/correct thread.
Thank you.
first of all sorry for y English...
Ive been read the threads about that, but ive this problem:
i ve a hardspl 3.29 and trying to downgrade to original rom the flashing process stops at 15%.
i can install only custom rom and so i cant reverting back to original rom and spl.
ive been tried to flash first the spl but not working...
someone can help me please?
thx!!
wow, I don't think I've ever haleard it this way before. Usually you can't upgrade to a cooked ROM, not the other way around.
So, you get no errors while installing a cooked ROM, but it stops at 15% when trying to downgrade...
I know that some shipped ROMs flash the SPL at 15%, so this must be the problem.
Undortunately, I am a lucky one who has never had anything bad happen to me while flashing (besides my laptop running out of battery), so I don't really have much advice to give you, but I'm sure somebody else will.
Sorry, hope it all goes well for you
HardSPL prevents itself from being replaced. You need to run JumpSPL or SSPL-KAIS on the phone when it is running WM as normal, which will switch you to triciolor screen, where you can flash the original SPL.
This should be detailed in the "How to revert to factory state" page in the wiki.
thx but ive been done all and now my kaiser it's brick on bootloader:
dont allow to flash hard spl
dont allow to flash custom rom
dont allow to flsh original rom
Help PLease!!!!!!!
tried with mtty but nothing...USB PORT CAN NOT OPEN
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
kilrah said:
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
Click to expand...
Click to collapse
tried but no chance...
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
mbarvian said:
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
Click to expand...
Click to collapse
now...
solved the stuck problem on bootloaderwith mtty for Vista, but with hardspl it's impossible to flash an original rom on the device (flsh stops at 15% error 226-flash error- wath is?)
so...i want to flash an original rom: waht can i do? help needed please...thx!!!
always prpblem in falshing original update...flashing process stops at 15%. ive downgraded at wm6 with spl 3.07.
ERROR 226
got a bit of a problem. Got above SPL installed. Tried upgrading it to hard spl 3.29.Every time it comes to 100% but old SPL still on. Device must be CID unlocked as it has custom ROM, takes other SIM cards and has above SPL.
Tried using Jumspl 1.56, 1.93 but no luck. This also stops me of upgrading the radio on it.
Any ideas
Try flashing with an SD Card... check out the HardSPL thread created by DaveShaw, in the first post there is a really good walk through and downloads for all the files. If you can't get that to work, post in that thread please. I, and many others, check it on a regular basis to answer questions just like this.
Also, double check that you do have 1.0 Olipro, enter boot loader mode and make sure 100% that is what it says. Also, what ROM are you running? Make sure you have a 6.1 ROM if you want to flash a 6.1 SPL or Radio. And please answer all of these questions in the HardSPL roll up thread by DaveShaw that is stickied.
pjcforpres said:
Try flashing with an SD Card... check out the HardSPL thread created by DaveShaw, in the first post there is a really good walk through and downloads for all the files. If you can't get that to work, post in that thread please. I, and many others, check it on a regular basis to answer questions just like this.
Also, double check that you do have 1.0 Olipro, enter boot loader mode and make sure 100% that is what it says. Also, what ROM are you running? Make sure you have a 6.1 ROM if you want to flash a 6.1 SPL or Radio. And please answer all of these questions in the HardSPL roll up thread by DaveShaw that is stickied.
Click to expand...
Click to collapse
Said well. Closing thread.