Hi all,
I am having troubles updating my radio rom. This device has been a beta pre lease.
Current version is:
R: 0.24.00.05 (believe it or not...)
G: 22.23.40.00H
D: 1.56.00.00
I was able to load the kaiser cooked rom (but radio and camara are not working properly). I have Hard SPL for Kaiser loaded.
I've tried many roms, but they all fail at 95% with error [262]. And then I have to reload the cooked rom to get the system working again.
Anyone any suggestions?
Jeroen
do you have a Kaiser?
I don't think that is the correct radio for Kaiser ROMs. If so there may be special stuff cooked into the original ROM, just like the ATT Roms which use a specific radio.
read the sticky regarding radio's.
Yes, I have a Kaiser (loaded S.N.E. cooked rom)
apposite said:
I don't think that is the correct radio for Kaiser ROMs. If so there may be special stuff cooked into the original ROM, just like the ATT Roms which use a specific radio.
read the sticky regarding radio's.
Click to expand...
Click to collapse
I'll look some more in the sticky's about radio's.
Thanks,
Jeroen
(loaded this rom: http://forum.xda-developers.com/showthread.php?t=357274)
that is not a Kaiser rom!! I'm surprised you didnt brick your device lol! Make sure your trying to flash a Kaiser RUU_signed.nbh that has only a OS.nb inside and then flash the radio.nb later...
read your reply
the link you provided to the "no evil" rom doesn't mention anywhere in the thread about the radio you are using. where did you get it?
recommended by thread author - radio 1.27.12.17
bought device on ebay
I know the radio is not compatible with the rom. That is why I want to update the radio.
It is just that the radio flash process hangs at 95%.
Best regards,
Jeroen
problem solved
At this location ftp://ftp.xda-developers.com/Uploads/Kaiser/Radio/ I found a rom similar to the existing in my device: 0.26.07.06. This one worked, and afther that I was able to flash the version I wanted: 1.27.12.11.
I'm happy. My device is up to date and very quick with Alex's Utra clean rom!
Thanks for listening!
Jeroen
hmmmmmmmmmm
try a hard reset and flash before you customize (upon initial bootup) - maybe???
Related
Hi, I'm absolutely a noob in flashing rom but in these day I'm reading a lot about it while I wait to recive my at&t tilt.
I would like to put in it an original htc rom and I found a couple of those in the wiki. I also read to pay attention to the "radio version" (I still don't get what radio is though) so here is my question: does "3.03.405.0 (Radio 1.64.06.04) updated original WWE" in this page already include the correct radio version? in other words: is it ready to be flashed into a tilt as it is?
any advice is appreciated, thanks
♣
Drom said:
Hi, I'm absolutely a noob in flashing rom but in these day I'm reading a lot about it while I wait to recive my at&t tilt.
I would like to put in it an original htc rom and I found a couple of those in the wiki. I also read to pay attention to the "radio version" (I still don't get what radio is though) so here is my question: does "3.03.405.0 (Radio 1.64.06.04) updated original WWE" in this page already include the correct radio version? in other words: is it ready to be flashed into a tilt as it is?
any advice is appreciated, thanks
♣
Click to expand...
Click to collapse
A Radio is the Firmware for accessing the Cell networks, GPS, some sound/camera drivers etc.
Only certain radios are compatable with certain ROMs.
I can't speak for the ROM you suggested but it looks like it includes a Radio. You can check after flashing by looking on the boot screen, there are 3 version numbers, radio is the one next to R:.
If it isnt the correct version just flash a new radio like you flashed your ROM.
Ta
Dave
Hello,
Can anyone tell me how to change the radio of a flashed a rom. I've found some very nice rom's but each one has some flaws. The one I would like to use (Dutty's Official WM6.1 5.2.19209 + 32mb pp) has an issue with the camera which might be solved by changing the radio (If what i've read is correct).
When I flash my device, I tend to use the JUMP SPL (1.56 or 1.93) because I experience what is called "the white screen issue". (you can read everything about this at: http://forum.xda-developers.com/showthread.php?t=354061). Hard SPL just won't work.
Questions:
- How to flash only the radio, keeping the selected ROM.
- Can I change the radio using "Jump SPL" or do I need another tool to unlock the device?
- Soms Roms, when using Jump SPL, just won't load. Why? Is there another way around this white screen issue?
- Is there an "idiot-proof" ROM-flashing guide?
Kind regards,
Gert Beckers,
Belgium
With the JumpSPL you should NOT flash radio roms, OS roms or full roms! So, flash HardSPL with JumpSPL to unlock your Kaiser first, then you can go forward to flash radio.
Refer to thread below to select a correct radio:
http://forum.xda-developers.com/showthread.php?t=393182
Thank you for the quick reply. I've read the post you refer to as recently as last night. Based on this, I've selected a suite (I hope) radio. How do I flash this? Jump SPL - > hard SPL and then the radio? Will the rest of the rom survive?
Kind regards,
Gert Beckers
GertBeckers said:
Thank you for the quick reply. I've read the post you refer to as recently as last night. Based on this, I've selected a suite (I hope) radio. How do I flash this? Jump SPL - > hard SPL and then the radio? Will the rest of the rom survive?
Kind regards,
Gert Beckers
Click to expand...
Click to collapse
yes, it won't touch the rest of the ROM
good luck
GertBeckers said:
Thank you for the quick reply. I've read the post you refer to as recently as last night. Based on this, I've selected a suite (I hope) radio. How do I flash this? Jump SPL - > hard SPL and then the radio? Will the rest of the rom survive?
Kind regards,
Gert Beckers
Click to expand...
Click to collapse
Flashing a new radio will not affect your current ROM load. Do understand that you should make sure that the Radio you are flashing is compatible with the ROM build you are using currently. A good place to look is HERE and HERE. Much thanks to AlltheWay!!
Jump SPL > Hard SPL > Radio
Flash a radio only rom won't change the os rom installed on your device.
search for a thread called the ultimate radio rom by
alltheway
it will give you excellent start up
battery benchamrking
radio/rom compatibility
dude sspl (jump spl) is not a wise choice... u should have a hardspl installed otherwise u can get bricked pretty easily
GertBeckers said:
Hello,
Can anyone tell me how to change the radio of a flashed a rom. I've found some very nice rom's but each one has some flaws. The one I would like to use (Dutty's Official WM6.1 5.2.19209 + 32mb pp) has an issue with the camera which might be solved by changing the radio (If what i've read is correct).
When I flash my device, I tend to use the JUMP SPL (1.56 or 1.93) because I experience what is called "the white screen issue". (you can read everything about this at: http://forum.xda-developers.com/showthread.php?t=354061). Hard SPL just won't work.
Questions:
- How to flash only the radio, keeping the selected ROM.
- Can I change the radio using "Jump SPL" or do I need another tool to unlock the device?
- Soms Roms, when using Jump SPL, just won't load. Why? Is there another way around this white screen issue?
- Is there an "idiot-proof" ROM-flashing guide?
Kind regards,
Gert Beckers,
Belgium
Click to expand...
Click to collapse
I have an AT&T Tilt and would like to flash the firmware to the HyperDragon III which can be found in this thread.
http://forum.xda-developers.com/showthread.php?t=397121
Following the directions in the TILT Specific Wiki, I flashed the HardSPL which was version 1.57.502.2. This was the file listed in the thread for the TILT.
Checking out the other threads in this forum, it looks like there are now HardSPL version in the 3 range like 3.07 3.28 3.29.
I'm confused if the file listed on the TILT Wiki was correct or if I actually need a different HardSPL file.
My other question is about Radio. I have read all the information about making sure that the radio on my phone will work with the rom that I would like to install.
What I cant seem to find though is how to check what radio my phone is currently using ?
Any help on this would be appreciated.
I know that answers are probably in the forum somewhere I just can't seem to find the right search string to pull it up.
Use the HardSPL found here: http://forum.xda-developers.com/showthread.php?t=396922 (this is a sticky on the ROM dev page).
Here is a guide for Radios: http://forum.xda-developers.com/showthread.php?t=393182 - basically flash a radio onto your device and test it out. Different radios will give you better/worse battery life, affect connectivity, GPS, and the like. Performance varies by region and what ROM you have installed.
Here is another link you may find useful: http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Hope this helps.
So the newer versions of the HardSPL have the same benefits as the one I installed said it did ? Such as being able to go back to older, original roms and helping to protect against bricking ?
QuantamPulse said:
So the newer versions of the HardSPL have the same benefits as the one I installed said it did ? Such as being able to go back to older, original roms and helping to protect against bricking ?
Click to expand...
Click to collapse
The 3.* versions of Hard Spl do the same as the 1.* versions - they allow you to flash cooked Roms. The 3.* have better compatability with WM6.1 than the 1.* versions, thats all.
Ta
Dave
Another question, I am trying to flash the new 3.56 HardSPL before installing the new Rom.
Do I need to use the SoftSPL even though I already have the 1.5x HardSPL installed or can I just run the update like normal.
Also, when trying to run the update like normal using the KaiserCustom RUU File, I run through the wizard and after getting my phone information it correctly shows that I currently have 1.5x, however it says that I will be updating to 1.00.000.0
Is this normal ? Or should it actually show that it is updating to 3.56 ?
yes thats normal one quick thing search for jockeys security unlocker that has saved many headaches
youtube solution
Hi, the youtube video below walks you through it
http://www.youtube.com/watch?v=ezZ-2lHi3T8&NR=1
I everybody i'm new here but it's fantastic.plenty of helpful things.OK that's my question:I have a kaiser and i flashed the hard spl and it's ok.i got in the bootloader:
KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
So it's ok,the bootloader is patched.now,i have windows mobile 6,and i want to install the ROM "tir 8k ITA",from here http://forum.xda-developers.com/showthread.php?t=437860 and i read it was windows mobile 6.1
So my question is:do i have to upgrade to wm 6.1 and then flash the rom or i just do it without upgrading?Thnks bye
No you don't. The ROM you're looking at will install 6.1 for you. Read his instructions on that link and if you have a problem, post it in that thread.
do i have to flash a radio or it's already implemented?Thanks bye
Each chef will let you know if they included the radio or not. If they didn't include one, they will tell you which one is recommended and more than likely will give you a link to that radio....hope this helps...
tolac92 said:
do i have to flash a radio or it's already implemented?Thanks bye
Click to expand...
Click to collapse
Most roms come with a radio but some don't, read the rom thread and then go here to flash the recommended radio.
http://forum.xda-developers.com/showthread.php?t=393182
Yes but in the post here http://forum.xda-developers.com/showthread.php?t=437860 there's not written i there IS or NOT the radio.How can i know?thnks bye
read the whole thread and others recommend different radios......
Ok i read the entire thread and the answers and i downloaded the radio 1.65.17.54
Perfect now i flash the radio and then i reboot and then i flash the ROM with the tir 8k?Can i let the pda turn on after installing the radio or this may cause problems?Gr8 Thanks bye
tolac92 said:
Ok i read the entire thread and the answers and i downloaded the radio 1.65.17.54
Perfect now i flash the radio and then i reboot and then i flash the ROM with the tir 8k?Can i let the pda turn on after installing the radio or this may cause problems?Gr8 Thanks bye
Click to expand...
Click to collapse
Please read the flashing first ROM http://forum.xda-developers.com/showthread.php?t=433835 all the steps are there.
If you're flashing a WM6.1 rom you may also want to change your hardSPL from 1.0.OliPof to one of the 3.xx series SPL's. The older SPL can cause some newer roms to hang, slow down etc. I use SPL3.29 which works fine form most WM6.1 roms.
Thanks everybody i successfully installed it.
And it's very fast,even with the old version of hardspl.If i wanna speed it up.Can i just flash the 3.xx hard spl?after do i have to RE-FLASH the rom with "tir 8k"?
Problem:I have a TIM sim,but the pda still connects to the 3 tim band.Before i had the 3 brand rom but now i should be able to connect to the band i want.why can't i?Thanks bye
Anyone can help me?Please help me i'm a newbie i DO need help.Thanks bye
tolac92 said:
Thanks everybody i successfully installed it.
And it's very fast,even with the old version of hardspl.If i wanna speed it up.Can i just flash the 3.xx hard spl?after do i have to RE-FLASH the rom with "tir 8k"?
Problem:Thanks bye
Click to expand...
Click to collapse
flash the 3.xx spl the same why you flashed 1.0...it wont format ur device, meaning all your "stuff" will still be there...no need to re-flash the rom..
as for this>>"I have a TIM sim,but the pda still connects to the 3 tim band.Before i had the 3 brand rom but now i should be able to connect to the band i want.why can't i?"
elaborate more, i dont understand what your saying!
Anyone can help a poor newbie?Pls help me...thanks
thanks mazin13,
sorry for the post i didn't see it,anyway i'm reflashing the hardspl 3.xx as you told me.
Sorry for my english,i'm italian,i'll try to elaborate the sentence u didn't understand.
Well,before i reflashed the tir 8k rom and hardspl, i had the default rom with windows mobile 6.i have as phone operator TIM and so the sim card is TIM.but when it turned on it was always used to connect to 3g tim,which is not my connection,because i have a TIM sim card.so i realised that if i would have installed the new rom no brand,i could have connected to the TIM connection,NOT 3g TIM connection.Why still it connects to 3g tim even if i flashed the no brand rom?Why it behaves like before when it was brand 3?Help i explained better...Thanks bye
Hi, I have a Tilt with PDA Corner Ultimate V.10,
Hard SPL 3.29,
and radio 1.27.14.09 (AT&T Stock)
The radio is causing the phone to have no sound, but everything else works fine. I know this problem is common, but I have tried everything within my ability and cannot get it to flash to any other ROM or radio.
When flashing a new ROM or radio, it shows the current version and update version, but never gets past 0% without a 262 error
I have tried all of the solutions I found posted on the forum, (Jump SPL, MTTY, EVERYTHING) trust me i've searched and read and searched more, I am not a newb to this although my post count is low.
Is there anyone with this particular problem on this particular ROM/radio combination that can help me out?
da_truth540 said:
Hi, I have a Tilt with PDA Corner Ultimate V.10,
Hard SPL 3.29,
and radio 1.27.14.09 (AT&T Stock)
The radio is causing the phone to have no sound, but everything else works fine. I know this problem is common, but I have tried everything within my ability and cannot get it to flash to any other ROM or radio.
When flashing a new ROM or radio, it shows the current version and update version, but never gets past 0% without a 262 error
I have tried all of the solutions I found posted on the forum, (Jump SPL, MTTY, EVERYTHING) trust me i've searched and read and searched more, I am not a newb to this although my post count is low.
Is there anyone with this particular problem on this particular ROM/radio combination that can help me out?
Click to expand...
Click to collapse
Maybe this is another one of those 'Radios from Hell' that won't let you upgrade. Note this quote from Ultimate Radio Thread:
Originally Posted by jockyw2001
A new sort of "Radio from Hell" emerged for the Diamond. See here. It combats rom updating by preventing us from running a SSPL.
A clear advice to all is: always make sure you have HardSPL installed and your device is security unlocked before installing a new radio !!
Also, maybe something in this thread will help you...
http://forum.xda-developers.com/showthread.php?t=393337
Thanx for your quick reply. I was thinking along the same lines, but I installed HardSPL just fine and flashed to the PDA corner ROM with no problem, the problem arose when I figured out that the radio was causing the phone to have no sound and wanted to update it..which of course did not work. Right now I am trying the stock ROM with the same radio to see if it will allow me to flash it...
da_truth540 said:
Thanx for your quick reply. I was thinking along the same lines, but I installed HardSPL just fine and flashed to the PDA corner ROM with no problem, the problem arose when I figured out that the radio was causing the phone to have no sound and wanted to update it..which of course did not work. Right now I am trying the stock ROM with the same radio to see if it will allow me to flash it...
Click to expand...
Click to collapse
That's why I'm thinking you may have flashed a 'Radio from Hell' which is preventing any further ROM updates. Maybe something in the RFH thread I linked to can help...
Good luck!
Ok, this is a radio from hell, i found some information on it stating that when it is used with any other ROM, sound will not function. Now I am trying to revert back to the orignial ROM but I have a new problem, I cannot find the original rom for this phone (AT&T aku 0.4.4 build 18128 radio 1.27.14.09) in working condition. There is only one link to it and the file is corrupted(rapidshare). is there anyone with this operating system that could send me a link that is NOT the one posted on XDA: (http://forum.xda-developers.com/showthread.php?t=341886). Thanx to drtolson, and thanx in advance to anyone else who is brave enough to get involved.
(Drtolson, I want to try the techniques on the post you sent a link to, but it states that the steps only work with that particular radio and others have not had any success using it with any other radios.)
da_truth540 said:
Ok, this is a radio from hell, i found some information on it stating that when it is used with any other ROM, sound will not function. Now I am trying to revert back to the orignial ROM but I have a new problem, I cannot find the original rom for this phone (AT&T aku 0.4.4 build 18128 radio 1.27.14.09) in working condition. There is only one link to it and the file is corrupted(rapidshare). is there anyone with this operating system that could send me a link that is NOT the one posted on XDA: (http://forum.xda-developers.com/showthread.php?t=341886). Thanx to drtolson, and thanx in advance to anyone else who is brave enough to get involved.
(Drtolson, I want to try the techniques on the post you sent a link to, but it states that the steps only work with that particular radio and others have not had any success using it with any other radios.)
Click to expand...
Click to collapse
I got the File from Rapid share and extracted the NBH and it seems fine.
Jonathan.Parker2005 said:
I got the File from Rapid share and extracted the NBH and it seems fine.
Click to expand...
Click to collapse
ok thanx, I'm downloading it again to see if it works...
Ok, i re-downloaded the file and it worked and also successfully flashed back to the original ROM, I probably won't be able to flash it to another custom ROM but at least the sound is working and the phone is fully functional. THANX TO EVERYONE FOR YOUR HELP!