Thanks you all genius for bringing so much fun to the world.
Back to the topic. I've one TyTN II with original HTC CHT 6.0 ROM with it. I want to change it to the original HTC WWE 6.1. Without using HardSPL, is it possible to work it out in the following way?
1. Extract the SPL in the original WWE ROM
2. Use SSPL-KAIS to flash the SPL into Kaiser
3. Flash the ROM
Referring to sirsycho's guide http://forum.xda-developers.com/showthread.php?t=335568, it said the ROM should be flashed first for reverting back progress, but without putting HardSPL in it, how to get it done? Or should the progress be
1. Apply HardSPL
2. Flash
3. Write the original SPL back using SSPL-KAIS
Thanks very much for your guidance
***
Actually I found this note from speedbird http://forum.xda-developers.com/showthread.php?t=397550
In fact I should follow up the post.. sorry for opening a new post...
Anyway just want to ask if it is possible to revert back to the original HTC SPL after the flashing progress (or as the final step)?
or is HardSPL the must during the whole procedure?
Thanks
hardspl is for mostly flashing cooked roms. if u r upgrading a official rom by htc to another official rom by htc (for same device) u don't need hardspl.
but it is good to have.
Related
Hey people.
I bought a TYTN2 off ebay and the previous owner already flashed Duttys rom 29th April onto it. he told me that he applied a HardSPL and flashed the rom.
My question is, I want to flash laurentius diamond V9 rom but I'm unsure if I need to start from the beginning, CID unlock and sim unlock and then apply HARDSPL again or can I just go straight to changing the SPL to version 3.56 and then install the new rom. Which path do you think I should take?
As i'm not entirely sure what the previous owner did to install the Dutt's Rom.
I have been reading the Wikis and FAQ's but i'm still unsure in my situation as i'm not sure what the phone has had done to it in the past.
Hold your camera button down and see if you even need to update to hardspl 3.56. If you do, then update your hardspl and then just flash whatever rom you need....note you may also need an updated radio. In any event, it will not hurt you by starting all the way over.
soupz said:
Hey people.
I bought a TYTN2 off ebay and the previous owner already flashed Duttys rom 29th April onto it. he told me that he applied a HardSPL and flashed the rom.
My question is, I want to flash laurentius diamond V9 rom but I'm unsure if I need to start from the beginning, CID unlock and sim unlock and then apply HARDSPL again or can I just go straight to changing the SPL to version 3.56 and then install the new rom. Which path do you think I should take?
As i'm not entirely sure what the previous owner did to install the Dutt's Rom.
I have been reading the Wikis and FAQ's but i'm still unsure in my situation as i'm not sure what the phone has had done to it in the past.
Click to expand...
Click to collapse
soupz said:
Hey people.
I bought a TYTN2 off ebay and the previous owner already flashed Duttys rom 29th April onto it. he told me that he applied a HardSPL and flashed the rom.
My question is, I want to flash laurentius diamond V9 rom but I'm unsure if I need to start from the beginning, CID unlock and sim unlock and then apply HARDSPL again or can I just go straight to changing the SPL to version 3.56 and then install the new rom. Which path do you think I should take?
As i'm not entirely sure what the previous owner did to install the Dutt's Rom.
I have been reading the Wikis and FAQ's but i'm still unsure in my situation as i'm not sure what the phone has had done to it in the past.
Click to expand...
Click to collapse
1. You should determine what SPL you have on your device FIRST
2. if you are doing a 6.1 ROM you will want a 3.xx HARDSPL installed -
3. the WIKI is your friend here - it will tell you how to determine what SPL you have and show you how to upgrade to what you need.
Once you have the CORRECT HARDSPL on your device and you understand the process you can continue - continuing before you understand and have the correct HRADSPL will guarantee that you need help for a bricked phone.
This is not hard - many have gone on before you ...
But you must read and understand.
Bill
Hey thanks for replying guys. Been reading through the SPL Wiki, but cant find how to determine your SPL.
ajmoncrief: Do I soft reset and hold down the camera button?
whk: Thanks for your advice. I have been reading the wikis for a while but I guess it will take a few more days of reading as I find it confusing with all the technical terms etc.
There is one bit which I would like clarification on if possible. in the thread 'http://forum.xda-developers.com/showthread.php?t=396235' is states:
'The reasoning is that those HardSPLs are what allows you to flash a ROM not originally meant for your device (from your vendor/region).
Once you have flashed the HardSPL you can then flash your ROM.
Once your ROM is flashed, you can then flash the SPL which matches that ROM to ensure stability. However, if you want to flash a new ROM, you have to go back to the beginning and flash the HardSPL again to allow you to load another ROM!*
from what I read,
Im assuming that if the previous owner flashed HARDSPL ver 1.xx and then loaded duttys April 29th 6.1 rom. I would need to now reflash HardSPL ver 1.xx again and then jumpSPL to ver 3.56 and then flash the new rom?
soupz said:
Hey thanks for replying guys. Been reading through the SPL Wiki, but cant find how to determine your SPL. ..snip..
from what I read,
Im assuming that if the previous owner flashed HARDSPL ver 1.xx and then loaded duttys April 29th 6.1 rom. I would need to now reflash HardSPL ver 1.xx again and then jumpSPL to ver 3.56 and then flash the new rom?
Click to expand...
Click to collapse
Read this -
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
This will help you figure out what SPL you have installed -
http://forum.xda-developers.com/showpost.php?p=1846653&postcount=800
and this:
http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
I believe that once you have HARDSPL on your machine it is there permanently - until you flash another one over it - SO - You can go right from HARDSPL 1.0 to 3.xx and then flash your new ROM.
Bill
Thankyou very much for your advice.
I managed to update to HardSPL 3.56 and flash the new rom. All went smoothly (nerve racking) and everything booted up fine. Now i'm just exploring and tweaking the settings.
I couldn't have done it without your guidance and of course the help from wiki and FAQ's.
Cheers!
Can the original Stock ROM from HTC be installed without changing the original SPL (with olipro's Hard SPL ) ? 10x in advance
Yes you can, BUT only if you find the rom in the HTC e-club when you signed in.
If you want to forexample use the HTC official roms from the forum you must use HardSpl. Fine example is the 1.28.457.2 rom which is official but it is the Asian version, that you cant flash with orginal spl.. Someone who now this for 100% can correct me if im wrong. iIm only 99% sure
hi,
I have just use the great work from jockyw2001 on the USPL 1.16 to make:
USPL 1.34 from RUU_Vox_HTC_FRA_1.34.406.1_4.1.13.54_03.10.90_Ship
USPL 1.35 from RUU_Vox_ORANGE_UK_1.35.61.1_4.1.13.60_03.18.90_Ship
Currently i use the RUU_Vox_HTC_WWE_1.34.405.1 and i have follow this thread
to upgrade from SPV650
use CID-Bypass 1.34 and RUU 1.34 to USPL 1.34
upgrade RUU IPL/USPL 1.35 with Vox-IPL-USPL-1.35.patched
All files have work for me, i hope this work for you to
Credits: pof and jockyw2001
This is still a soft SPL? What benefits does this serve over the previous uSPL by jocky?
lol~~~~
tested, both of USPL and hardSPL worked fine.
The hardSPL version is 1.35.0000Cy
Thank you for your great job.
h4waii said:
This is still a soft SPL? What benefits does this serve over the previous uSPL by jocky?
Click to expand...
Click to collapse
I dont know the change between the SPL 1.16 and 1.34/1.35. The patch
method was strictly the same. This is just for people like me who want
everytime the last release
I see.
Well thanks for your work in patching the new SPL. Hopefully somebody can merge or sticky this thread.
which file should i use for hard SPL? will it work forever means i can update any VOX unofficial ROM without running any SPL later?
It works as long as you don't flash an official ROM. It doesn't really matter which one you use. 1.16 is working perfect on my device, so should these!
frauhottelmann said:
It works as long as you don't flash an official ROM. It doesn't really matter which one you use. 1.16 is working perfect on my device, so should these!
Click to expand...
Click to collapse
1.16 is USPL means software SPL, i also use that to bypass CID and it needs to run everytime whenever you are flashing any ROM.
But my concern is if there is some Hard SPL and i run it on my VOX once, would i need to run USPL/HSPL again whenever i need to flash any ROM or will it work forever so that i can simply flash any ROM without using any SPL further.
If you FLASH uSPL instead of simply patching it through RAM, you will have an SPL that acts HARD until you flash an official ROM as it will overwrite the SPL since it is not a true HardSPL.
Take the same steps to patch uSPL and then instead of flashing your ROM, run FLASH.exe from within the uSPL directory, flash USPL and then flash your unofficial ROM. Patched uSPL will remain on the device and thus it will act as a HardSPL to any unofficial ROM and you will not need to patch SPL every time you flash an unofficial ROM.
Will this USPL allow me to flash an unofficial ROM on my Vox that has got the latest WM6.0 Orange UK ROM on?
Roland
Please help..
Hello, i have an Orange France SPV e650, every time i run sda application unlock thing it says "phone not unlockable" then it says succesfully unlocke, now it wasnt succesfully unlocked cos the flash does not work, stops at 3 percent.... Please help me I really look forward to ROM upgrade.
Thank you,
Sammy
BIG THANKS TO ChiemY
I can't believe how long it took me to solve this riddle lol. Was trying use Vox USPL- CID BYPASS for 1.16 and just took a lucky guess at using the number that seemed to be shown on the bootloader so often being 1.34 . It's my first time playing with WM HTC devices and it seems it will be smooth sailing from now on .
I flash HTC P3400 with Vox USPL and when phone restart that goes in blank screen, now it does not flsh anything, please help
I flash HTC P3400 with Vox USPL
I flash HTC P3400 with Vox USPL and when phone restart that goes in blank screen, now it does not flsh anything, please help
You have successfully bricked your device - may it rest in peace. The SPL is the part of SW that opens the door to other SW loading. If that does no more work you are lost.
Hi to everybody!
I need to change rom for changing language.
The device is not CID unlocked, so I need to unlock it, but I would like to not brick it:-D
At the moment my Herald has:
IPL 4.14.0001
SPL 4.14.0000
I can directly hardSPL it and then flash the original HTC rom?
If I decide to change again the rom with another cooked rom I think there could be less problems then flash the original one, isnt'it?
Can you give me a reason for using USPL?
Thanks!
Hey,
I am going to send my phone back to the warranty service because i have a very poor Wifi reception and dust under the screen...
But i have a custom ROM installed..
Do i need to instal a original HTC ROM??
And how do i unistal Hard-SPL??
I think you have to go back to original ROM, perhaps you can find it in the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Topaz
Or in Topaz section
I allready have a rom from the HTC.com website, official
But how do i unistall Hard-SPL??
If you read the link I posted above, there is a section on how to hardspl
Extracted: NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted here below. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.