Hard SPL for an Original Shipped ROM - Wing, P4350 ROM development

Hi to everybody!
I need to change rom for changing language.
The device is not CID unlocked, so I need to unlock it, but I would like to not brick it:-D
At the moment my Herald has:
IPL 4.14.0001
SPL 4.14.0000
I can directly hardSPL it and then flash the original HTC rom?
If I decide to change again the rom with another cooked rom I think there could be less problems then flash the original one, isnt'it?
Can you give me a reason for using USPL?
Thanks!

Related

JAFWM-May not be the answer to flashing difficult prophets

Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Re: JAFWM-May not be the answer to flashing difficult prophe
rcnomad said:
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
Click to expand...
Click to collapse
Thanks for the feedback, in case JAFWM have some bug, your post will help me to debug it. It would help me also if you could post here your JAFWMLOG.txt , you can find it in same dir JAFWM.exe is located.
But I will check it also myself and will post result here, but sofar i know there are not any problems known until now. However, i have no NEO i will buy one at monday and play little bit. Maybe os not match bootloader or whatever, but let see after i have my NEO.
JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY WORK
Thanks TA_mobile
I did as you recommended and it worked!
JAFWM does what it is supposed to do...
Re: JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY
Today played little bit with my Qtek s200. I flashed it with with follow roms:
JAMin_WWE_ 2130923_21309112_020720_ship
RUU_Prophet_1001321_10013102_11320_DopodAsia_Ship
I did not unlock any CID before and all functions was normal. I did it with skipped and witout skipped bootloader flash. If any one have any problem with a secific rom, plz tell me and i will test it.
All this tests we has done with the new version (1.3beta) released today. You can download from http://forums.phone-tools.cn/showthread.php?t=9411 and try it.
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Tamagochi said:
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Click to expand...
Click to collapse
But what is the reason you want upgrade or downgrade your bootloader? I can not get it :?
Tamagochi said:
...I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????...
Click to expand...
Click to collapse
Hello,
i have an German O2 Neo and sometimes Problems with CID unlocking for Flashing. Start aWizard an use the option "e". Then show on youre XDA and start the enablerapi.cab on youre XDA. At next use aWizard with the option unlockCID and test flashing!
With this Method i can backup my Neo with aWizard and flash the new Jamin ROM, the Qtek ROM not. Rebackup to German ROM also OK but only the OS, the BootScreen (SplashScreen) not.
Sry for my miserable english!

Reverting AKU 2.3 ¿Upgrade? Spanish ROM RQ

After instaling the ROM in the link:
Prophet AKU2.3 pdamobiz customized rom [G4 with SPL 2.15.0001]
I don't mind this being WWE instead than Spanish, but I got several problems:
Hang during install after first reboot. (after every Hard Reset)
Not all programs installed.
Not all installed programs running.
Some other minor glitches.
I moved from 2.15 ESP Rom (Vodafone) wich I was unable to extract.
Does anyone knows were to find my "old" rom?
I downloaded 2.13 from imateclub but refuses to install: "this nbf file is not for your device, get a newer one".
Help! please.
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
cidriver said:
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
Click to expand...
Click to collapse
Thanks for your answer!
I'm unsure if this is CID unlocked, it is SIM unlocked now, will check for the CID issue. Though I assume that being able to install other 2.15 rom (dopòd) means it is already CID unlocked too....¿?
I was afraid the "downgrading" has to be done in the same version range. (2.15)
Thanks again for the wiki proposal, will go there.
The wiki site is a real mess actually, with no trace of usefull info specific for the prophet. (Sorry to say) Just a couple of ROM's some not working.
No one with a 2.15 ESN rom to share?
Regards.

HTC branded Kaiser and Rom Help

I have a HK Chinese language Kaiser and wish to know that if I want to upgrade to WWE or WWE HK version using the official HTC Roms do i need to do any of the hard_spl or CID unlock or can I just upgrade. Basically looking to make it work in english
Thanks
RedChilliDevil said:
I have a HK Chinese language Kaiser and wish to know that if I want to upgrade to WWE or WWE HK version using the official HTC Roms do i need to do any of the hard_spl or CID unlock or can I just upgrade. Basically looking to make it work in english
Thanks
Click to expand...
Click to collapse
Start here:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading and read. It's all been written down before.
Ta
Dave
thanks for the reply
it seems that i should be able to do as a normal upgrade with no need to worry about CID and having to run hard_spl if its the official HTC one. Does that mean that any region rom will work as long as its from their website?
complete noobie as you can tell!!!
RedChilliDevil said:
it seems that i should be able to do as a normal upgrade with no need to worry about CID and having to run hard_spl if its the official HTC one. Does that mean that any region rom will work as long as its from their website?
complete noobie as you can tell!!!
Click to expand...
Click to collapse
If your flashing a HTC Rom onto a HTC branded device, you shouldn't need to worry about HardSPL or CID.
HardSPL is a new bootloader that allows you to flash ROM's with a different CID (Carrier ID). If you are flashing one from the same carrier it shouldn't be a problem.
You should only need to do this if you are flashing a Cooked ROM by one of the Chef's on this site.
I think all the above is right...
Can someone please confirm my understanding of this is correct?
Ta
Dave
I believe you'd get an "Invalid Region" error if you tried to flash a WWE Rom to a Chinese Language device? I could easily be wrong though - I've never tried it...
I'd Hard SPL and CID unlock before flashing any Rom's anyway - Official or otherwise (but that's just me).
sub69 said:
I believe you'd get an "Invalid Region" error if you tried to flash a WWE Rom to a Chinese Language device? I could easily be wrong though - I've never tried it...
I'd Hard SPL and CID unlock before flashing any Rom's anyway - Official or otherwise (but that's just me).
Click to expand...
Click to collapse
Now you say that, I would always HardSPL before flashing, just in Case.
I've unlocked everything on my device.
Dave
Thanks for the quick response.
Guess I'll do the hard_spl way.
Thanks again

Upgrade original wm6 to original 6.1 without HardSPL possible?

Thanks you all genius for bringing so much fun to the world.
Back to the topic. I've one TyTN II with original HTC CHT 6.0 ROM with it. I want to change it to the original HTC WWE 6.1. Without using HardSPL, is it possible to work it out in the following way?
1. Extract the SPL in the original WWE ROM
2. Use SSPL-KAIS to flash the SPL into Kaiser
3. Flash the ROM
Referring to sirsycho's guide http://forum.xda-developers.com/showthread.php?t=335568, it said the ROM should be flashed first for reverting back progress, but without putting HardSPL in it, how to get it done? Or should the progress be
1. Apply HardSPL
2. Flash
3. Write the original SPL back using SSPL-KAIS
Thanks very much for your guidance
***
Actually I found this note from speedbird http://forum.xda-developers.com/showthread.php?t=397550
In fact I should follow up the post.. sorry for opening a new post...
Anyway just want to ask if it is possible to revert back to the original HTC SPL after the flashing progress (or as the final step)?
or is HardSPL the must during the whole procedure?
Thanks
hardspl is for mostly flashing cooked roms. if u r upgrading a official rom by htc to another official rom by htc (for same device) u don't need hardspl.
but it is good to have.

htc touch diamond 2 serial number

hi to everyone especially the english speaking people i,m having a problem i,m in sweden i bought a D2 unfortunately i cant change the language to english well i know i can crack it and flash a WWE stock or cooked rom ........but in doin so will void my 24 months warranty i dont want to do that........so i,m gonna ask a big favour if someone could just let me use their serial number from 1 of their english D2 phones to upgrade my phone to english from htc english site that would be great
please..
thanks in advance
No, you can run HSPL on your TD2 without any worries.
If you want to keep the warranty read this:
Hard-SPL Unlocker for Topaz - Released! Now New Update to HSPL 1.83!
"NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted here below. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL."
Enjoy
If you need, here you can find serial numbers:
http://forum.xda-developers.com/showthread.php?t=568330
Hi,
when i flash my TD2 it says i have already done the hardspl before on another device... what should i do???

Categories

Resources