Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Re: JAFWM-May not be the answer to flashing difficult prophe
rcnomad said:
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
Click to expand...
Click to collapse
Thanks for the feedback, in case JAFWM have some bug, your post will help me to debug it. It would help me also if you could post here your JAFWMLOG.txt , you can find it in same dir JAFWM.exe is located.
But I will check it also myself and will post result here, but sofar i know there are not any problems known until now. However, i have no NEO i will buy one at monday and play little bit. Maybe os not match bootloader or whatever, but let see after i have my NEO.
JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY WORK
Thanks TA_mobile
I did as you recommended and it worked!
JAFWM does what it is supposed to do...
Re: JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY
Today played little bit with my Qtek s200. I flashed it with with follow roms:
JAMin_WWE_ 2130923_21309112_020720_ship
RUU_Prophet_1001321_10013102_11320_DopodAsia_Ship
I did not unlock any CID before and all functions was normal. I did it with skipped and witout skipped bootloader flash. If any one have any problem with a secific rom, plz tell me and i will test it.
All this tests we has done with the new version (1.3beta) released today. You can download from http://forums.phone-tools.cn/showthread.php?t=9411 and try it.
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Tamagochi said:
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Click to expand...
Click to collapse
But what is the reason you want upgrade or downgrade your bootloader? I can not get it :?
Tamagochi said:
...I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????...
Click to expand...
Click to collapse
Hello,
i have an German O2 Neo and sometimes Problems with CID unlocking for Flashing. Start aWizard an use the option "e". Then show on youre XDA and start the enablerapi.cab on youre XDA. At next use aWizard with the option unlockCID and test flashing!
With this Method i can backup my Neo with aWizard and flash the new Jamin ROM, the Qtek ROM not. Rebackup to German ROM also OK but only the OS, the BootScreen (SplashScreen) not.
Sry for my miserable english!
Related
I tried to flash the Qtek S200 with the ROM which I found at
ftp://ftp.xda-developers.com/Uploads/S200/. But the software said "Wrong vendor ID". CID unlocking way which is used at a Wizard does't work. ROMUpdateUtility_Wizard_NoID.exe does't work also. How can I solve this problem?
flashing difficulties w/th some prophet models
I have had the same issues with my dopod 818 pro..Couldn't flash, always received vendor ID error.
The only way I was able to flash my device to a newer rom was by using JAFWM, which is an aftermarket flashing tool created by Odeon. The device costs about 50usd. With JAFWM I was able to easily flash my prophet to a newer QTEK and Jamin rom, without to much hassle. Note: I still had to use awizard to unlock the CID.
nikolsky2006 said:
I tried to flash the Qtek S200 with the ROM which I found at
ftp://ftp.xda-developers.com/Uploads/S200/. But the software said "Wrong vendor ID". CID unlocking way which is used at a Wizard does't work. ROMUpdateUtility_Wizard_NoID.exe does't work also. How can I solve this problem?
Click to expand...
Click to collapse
try this one
http://www.romupdate.ru/index.php?o...d&id=153&chk=0f5bb214bbf3ccbb915feb4c1c3c7cab
Re: flashing difficulties w/th some prophet models
rcnomad said:
I have had the same issues with my dopod 818 pro..Couldn't flash, always received vendor ID error.
The only way I was able to flash my device to a newer rom was by using JAFWM, which is an aftermarket flashing tool created by Odeon. The device costs about 50usd. With JAFWM I was able to easily flash my prophet to a newer QTEK and Jamin rom, without to much hassle. Note: I still had to use awizard to unlock the CID.
Click to expand...
Click to collapse
I have followed the following thread , download the Romupdateutility.exe and managed to upgrade my Dopod 818 pro ROM to I-mate without vendor error.
http://forum.xda-developers.com/viewtopic.php?t=46548
?s about rom updates changing from qtek rom to imate
Could someone please tell me were i could get the programs that i see you guys talking about. I have the qtek s200 and want to intall the imate jamin rom. When i click on the ftp links it does'nt work. Is there something speacial i have to do to get to the ftp site? Could i get someone to email me the stuff i need to do it?
Re: ?s about rom updates changing from qtek rom to imate
jovan said:
Could someone please tell me were i could get the programs that i see you guys talking about. I have the qtek s200 and want to intall the imate jamin rom. When i click on the ftp links it does'nt work. Is there something speacial i have to do to get to the ftp site? Could i get someone to email me the stuff i need to do it?
Click to expand...
Click to collapse
The JAMin ROM is here: ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip
To install without getting wrong vendor ID, please search the forum.
thank you i will try it out.
rom update utility problem qteks200
i still cant get the romupdate program to work, just keeps saying check your update utility. i have downloaded from a few sites same thing. The program also says smartphone?????
Hi there,
Since I installed the latest dopod 818 Pro WWE ROM on my Qtek S200, I have some trouble with the device now and then. It unexpectedly reboots while having conversations after which it can't find my service provider. Then when I disable and re-enable the phone in communications manager it finds the network again. Sometimes calls are not coming through either. I did not have any of these problems with the old Qtek S200 NL ROM.
I also tried different radio roms. 2.19.21, 2.20.21, 2.30.21, no luck.
I like to try the Jamin ROM. Is there anyone who know where I can find a NoVendorID version of the latest Jamin WWE ROM? I tried the regular one in combination with the ROMupdateUtility.exe of the Dopod NoVendorID ROM, but this gives an error at 80% while flashing. After that I was only able to enter the bootloader mode of my S200. So I flashed it once again with the Dopod 818 Pro ROM.
Thanks!
Kind regards,
Dennis
Yeh, I would like to have the No Vendor ID JAMin WWE Rom, too. Could some one please make that? I still do not like the dopod ROM for some reasons. JAMin ROM is still my best choice.
I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!
cidriver said:
I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!
Click to expand...
Click to collapse
I have a G4 prophet. Again, it is impossible to CID unlock a G4 prophet!!!!!!!!!!!!!!!!!!
Why people keep telling me to CID unlock my device? Of course we all know CID unlock first. If we could CID unlock our device, why should we ask for No Vendor ID upgrade?
no-vendor ID
Yes, I'm still looking for a No-Vendor ID Jamin ROM WWE, that would work on my S200... Anyone?
Thanks
After instaling the ROM in the link:
Prophet AKU2.3 pdamobiz customized rom [G4 with SPL 2.15.0001]
I don't mind this being WWE instead than Spanish, but I got several problems:
Hang during install after first reboot. (after every Hard Reset)
Not all programs installed.
Not all installed programs running.
Some other minor glitches.
I moved from 2.15 ESP Rom (Vodafone) wich I was unable to extract.
Does anyone knows were to find my "old" rom?
I downloaded 2.13 from imateclub but refuses to install: "this nbf file is not for your device, get a newer one".
Help! please.
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
cidriver said:
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
Click to expand...
Click to collapse
Thanks for your answer!
I'm unsure if this is CID unlocked, it is SIM unlocked now, will check for the CID issue. Though I assume that being able to install other 2.15 rom (dopòd) means it is already CID unlocked too....¿?
I was afraid the "downgrading" has to be done in the same version range. (2.15)
Thanks again for the wiki proposal, will go there.
The wiki site is a real mess actually, with no trace of usefull info specific for the prophet. (Sorry to say) Just a couple of ROM's some not working.
No one with a 2.15 ESN rom to share?
Regards.
Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange
Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor
chicksor said:
Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor
Click to expand...
Click to collapse
Custom build rom will not flash as your phone has IPL 1.xx,it must have IPL 2.xx and it shud be CID unlocked.Wm5 will not boot up as the original Bootloaders have changed,when you flashed Buttons rom to downgrade.
Now reflash Button's Rom 1.05 again in bootloaders and use lokiwiz02b to SIM/CID unlock the phone,after SIM/CID unlocking,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26,only after that it'll upgrade to any wm6 or 6.1 rom.But if you want to flash official vodaphone rom,download the official rom and flash it in Bootloaders.
Cheers !