Sorry for bothering you. I really need some help with my MIO p560 PDA. Yesterday I started it, it showed on the screen the MIO logo etc. and then black screen. What is strange is that the pda is working, but there is no image on the screen. I can connect with usb cable in windows and i can browse the files from it. The only problem is that there is no image on the screen. But the display is ok because i see the MIO logo at power on. So it seems that there is a problem with windows mobile 6. Does anyone know if there is a possibility to change some windows config files?
Best regards,
marmura
make a hard reset..press the jog up and slide the power button and then maintaining the jog pressed up slide the power on.
Mio PDA P560
Hi, I have a Mio PDA P560. After I installed 2 external programs (Worldmate and IDELIXlookMOBILE) my device can not call the Maps on the SD Card, it can not activate the WiFi, the program for deinstalling of programs doesnot work, and the hard reset does not work.
Does know anybody what is to do ? Can somebody send me the OS windows mobile 6.0 Greek for this device PDA Mio P560?
Can somebody say to me how I can deinstall ANYTHING ( incl. operating system ) on my PDA and then reinstall the OS?
Thanks
daivatam said:
make a hard reset..press the jog up and slide the power button and then maintaining the jog pressed up slide the power on.
Click to expand...
Click to collapse
Hard reset does not word as you are describing. I tried all time in such way.
Hi,
but your pda in bootloader mode and use the tool you find to restore it, do the following.
with your pda off keep the joystick right and the right button. Without releasing them switch your pda on and keep them pressed until the blu screen come.
Do you guys have any english rom for the mio p560 ?
I really need it as I have to flash mine.
Cheers,
Bernard.
Related
Hello I have a very strange problem with my Prophet...
when I turn it on or do a soft-reset i must touch the display and move with the stylus on the Display all the boot-time when i don´t do this my Prophet freeze at the Splash screen is that Normal ?
I have a xda Neo G4 with the Last Dopod Rom please help me anyone... sorry for my bad english and THANK YOU!!!
Did you make a HR?
Remember, you'll erase all your data. Remove the SD card and Press and hold the camara and common manager buttons at the same time, then put the stylus into the hold close to the USB connection. Still hold the mentioned button, when a dark screen become, it going to said to restore, push the green button you used to answer a call.
Your device become as factory.
cidriver said:
Did you make a HR?
Remember, you'll erase all your data. Remove the SD card and Press and hold the camara and common manager buttons at the same time, then put the stylus into the hold close to the USB connection. Still hold the mentioned button, when a dark screen become, it going to said to restore, push the green button you used to answer a call.
Your device become as factory.
Click to expand...
Click to collapse
i know how goes a hardreset Thank you no i will only know why this happens ?
I have the same problem. I only soft reset while on external power otherwise the system either hangs or I have to tap the screen often to keep it alive. I found no solution.
HELP!!!
Having the same problem here.
After hard or soft reset my prophet freezes on the screen with the spl/ipl info. This happend after I tried to install the AKU3.3.13.ASERG-us rom.
Tried everithing I know (which is not much in this area)
HELP
Try flashing with another ROM. Wm5 or wm6. We are plenty of alternatives.
reSpect
Just resetup ur Rom and other programs.... and make sure when u install any programs need to restart ur device that make restart ... and follow the steps step by step
Hi
I've had my orbit 2 for a while now using the o2 software and I thought today I would try and install HTC home to see what all the fuss is about!
I downloaded the cab and installed it but now my orbit 2 crashes on start up!
When I turn it on I get the blue o2 welcome screen, the green windowms mobil 6.1 screen then it loads. The o2 smart bar is still there and the two screen buttons say calander and contacts (as its always been).
Those buttons then change to phone and menu I believe and the phone crashes!
How do do a factory reset the phone without being able to turn it on?
Update: It appears I can access the phone when its plugged into my pc, but as the phone crashes sometimes!
Help!!!!
press the two hardware phone keys together and then, while holding
them pressed, softreset with the pen. A message should appear on
the screen, that you will lose all personal data. Press green button
to confirm and phone will HARDRESET...
Good luck,
Olioaglio
Are you using the right cab file?
Hi,
I have an Orbit 2 and have no problems with my 6 tab HTC home file.
You do need to take care which version you are using though.
The cab file I have and which I know does work is:
HTC.Kaiser.Home.Eng.0409.6Tab.sch
Instead of hard resetting your orbit 2, just remove the cab file you're using and install the cab file I list above and which you should find by doing a search of this site. Then do a soft reset and it should be fine.
After hard reset, although the installation looked fine, the phone does not work. When i turn it on, the splash screen appears but than i get a white screen and nothing work. The phone was not in use for a long time and i think it relates to the fact that the battery run out totally.
What now? I guess i need to install a new ROM. But how do i get a new one and how do i install it?
I tried to get to the bootloader menu by pressing the volumUp+Nav button down + Reset (using the pen) but it did not work for me.
Thanks guys.
Hi all,
I'm in desperate need of help. I put some Htc Home 2.1 software on my o2 Xda orbit 2 by mistake thinking it was some other piece of software.
Now my phone just locks up and hangs at the Windows mobile 6.1 green booting screen.
The htc software was just some theme type software for the home page, and i have not made any firmware changes since upgrading to 6.1 ages ago.
I've tried holding in the power button whilst pressing the soft reset button, but it doesn't seem to help.
Has anyone got any idea's as i'm desperate.
Rich.
if you cant get it to work then you may need to hard reset it...
To do this hold down the ok and windows button and reset the device at the bottom of it. All the time holding down the buttons then it will ask you i think press the power button to hard reset
NOTE: This will delete everything off your device and remove the sd card before just in case.
Hi everyone. I'm trying to fix my aunt's Toshiba Jorn.e touch Windows CE (tablet?) (umpc?) (shi*?) from Groupon. When I hold the power button, the "Toshiba Leading Innovation" screen appears, and.. the nothing happens. I've tried update firmware to reset system, but the update doesn't start. Can you help me?
Sorry for my English, but i have to fix it.
When i connect tablet to PC with a miniUSB cable, the system detects device as "SEC S3C6410X Test B/D".
noobah said:
When i connect tablet to PC with a miniUSB cable, the system detects device as "SEC S3C6410X Test B/D".
Click to expand...
Click to collapse
It looks like your Journ.e is in test mode .
It's stuck at Toshiba "Leading Innovation" ? Feels like "Dead Obsolescence" to me
Forever living in my Galaxy Ace using XDA App
noobah said:
Hi everyone. I'm trying to fix my aunt's Toshiba Jorn.e touch Windows CE (tablet?) (umpc?) (shi*?) from Groupon. When I hold the power button, the "Toshiba Leading Innovation" screen appears, and.. the nothing happens. I've tried update firmware to reset system, but the update doesn't start. Can you help me?
Sorry for my English, but i have to fix it.
Click to expand...
Click to collapse
Well, in this device there is a reset sliding button, you can find it hidden below the device, slide this to the left and then back to the right, the device now should shutdown. now press the power button for at least 3 seconds and you will have your device back to life. hope it works for you as it did for me.
Moved
mmthabet said:
Well, in this device there is a reset sliding button, you can find it hidden below the device, slide this to the left and then back to the right, the device now should shutdown. now press the power button for at least 3 seconds and you will have your device back to life. hope it works for you as it did for me.
Click to expand...
Click to collapse
When you plug the tablet into the pc via USB and you restart , the device just freezes... You cannot restart it anymore, you cannot fix it with the hard reset mini button... You have can do is wait for the battery to go off and hope the soft will start run normal.
I hope i can install any other ROM like android or something - this tablet soft is hilarious...
Maybe a little late, but for me it worked
There is a method of reflashing the Firmware of the device via SD-Card.
Just run the exe in the zip-file and direct it to copy all files to your SD.
Then insert ist into your device and slide the mini hardware switch from right to left and back. Now turn on the Device it schould now display Toshiba-splash with the little message saying "Updating..." it take some time, but then after a restart you are good to go.
Beware the Update is DELETING all yout Data on the Device even if it is not stored in the Windows part of the flash!
Just remove the " "
The File is located here:
h t t p://aps2.toshiba-tro.de
/kb0/OPT0502VS0000R01_E1100-060510.ZIP
Complete Instruction in German:
h t t p://aps2.toshiba-tro.de/kb0/OPT0502VS0000R01de.htm