Database Info

NBD 7.9 & Boot problem

Hi,
I have installed ~2 weeks ago NBD 7.9 and everything was ok. Today I have restarted my phone to change my SIM card but my phone could not start.
I see HTC logo but phone freezes after having NBD logo and nothing happens.
As you can image because of could not connecting to the phone, I can not also update ROM.
Any tip to recover my phone?

Did you try a hard-reset?

Can you explain what exactly you mean? Probably I do not know what is hard reset on these devices.

Ok I have found hard reset on the page
http://wiki.xda-developers.com/index.php?pagename=WizardFAQ
But now there is no power also. I also could not boot anymore.

* Press and hold both the Comm Mannager Button and the Voice Command Button
* While keeping those two buttons pressed, press the Reset Button with your stylus
* After about a second you will be prompted for confirmation. Press the Talk Button to confirm
----
oh I see, you found it.
the hard reset set your phone to the "original state" of the ROM (in that case right after you installed your NDB rom).
what do you mean there is no power?
Could it be your battery is empty and needs to re-charged?

There is no response on the phone now.
I suspect battery is empty but when I try to connect power cord no response also.

If you are sure your battery is not empty try to get into the bootloader mode:
depending on the type (G3 or G4) follow the instructions:
http://forum.xda-developers.com/showthread.php?t=298613
especially step G3.2 or G4.2 respectively.

tarantor said:
There is no response on the phone now.
I suspect battery is empty but when I try to connect power cord no response also.
Click to expand...
Click to collapse
When I tried to connect to power while the phone is off it takes some seconds before response. Have try.

I have a G3 device (Vodafone VPA II Compact). But there is still no response.
I think it is power issue now. The bad thing is that I have only USB cable at home and the main power charger at work now.
Are there any way to charge with USB cable when phone is not open?

I would suggest following:
1. ensure your battery is full
2. do the hard-reset again - this may solve your problem already
3. if not, try to get into the bootloader mode (see the thread referred to above for instructions)
4. follow the instructions to re-load the ROM

tarantor said:
I have a G3 device (Vodafone VPA II Compact). But there is still no response.
I think it is power issue now. The bad thing is that I have only USB cable at home and the main power charger at work now.
Are there any way to charge with USB cable when phone is not open?
Click to expand...
Click to collapse
I just tried ... while your phone is off the USB connection to the PC should provide you the current .. at my case the WIZARD starts to charge .. have a try.
----------------
the red LED light on the right above the display indicates the charging .. and turns green once it is fully charged, so in any case, you should see a light, although it takes 3-5 seconds after connecting to the USB.
Does it work?

I have tried and there is no light. As I remember before it was not possible if you are not connected via ActiveSync.
Anyway, I can try Monday at office.
Thanks for your help!!!

You're welcome. Good luck for Monday. Hope it will work out. Not much help yet from me but I will be around here.

This was driving me mad as well. I had to put it into bootloader mode (holding camera while resetting) and flash back to the Tmob 2.26 and then reflashing nbd.
The trick is to disable the HTC home plugin before you install any other apps. From what I understand its to do with some mysterious dlls.
I found this out on Friday and so far I haven't had any problems but I guess its still early days.
Good luck!

OK. It was a power issue and I could make a hard reset at office and it works again now.
I will try NBD 8.1 and see the difference.
Thanks for your help a lot!

good to hear it is working again!

Tmobile Wing Won't turn on after Rom update attempt.

Tmobile Wing Won't turn on after Rom update attempt. No reset workers. Can't charge can't do anything, its just dead. I really don't want to wait until the wing 2 comes out, is there anything i am doing wrong?? I guess i should add that i used hypercore

It turns out that i think something when wrong( i don't see why?) but i put it into bootloader thing(camera + reset)

Wrong Section to post in. Also your phone is probably bricked.

Go to the xda wiki and search for Goldcard. Even if it's for the elf, it was copied from the Herald. I haven't tried it myself, though.

just hold down the camera button and press the reset button on the side
then connect usb cable
then download the official stock t-mobile rom (google it)
and it should work again

Rim1Flex said:
Tmobile Wing Won't turn on after Rom update attempt. No reset workers. Can't charge can't do anything, its just dead. I really don't want to wait until the wing 2 comes out, is there anything i am doing wrong?? I guess i should add that i used hypercore
Click to expand...
Click to collapse
turn on in bootloader mode
(camera+reset button on side below the volume)
then download the official stock rom and run it and you should have ur old rom back
just search on google for t-mobile stock rom

Another brick
I was installing the customized ROM from thewingster (WM6.5) on my Wing. I did not include MS voice recognition, and I think I included all the other software. The progress bar was humming along on my wing, then the flash program said that the file was corrupt, and my phone went blank.
Now I cant turn it on, it wont light up at all when I plug in a charger or a computer USB (activesync wont notice anything is attached to the computer, and wont turn on at all). I tried a charged up battery from another wing, nothing changed...
I tried hard resets with the soft keys and reset button, and camera and reset button. Cant access it through my computer using any program (herald-uspl or activsync)
I have nothing at all.
Any ideas other than throwing it off a bridge?

routine8 said:
I was installing the customized ROM from thewingster (WM6.5) on my Wing. I did not include MS voice recognition, and I think I included all the other software. The progress bar was humming along on my wing, then the flash program said that the file was corrupt, and my phone went blank.
Now I cant turn it on, it wont light up at all when I plug in a charger or a computer USB (activesync wont notice anything is attached to the computer, and wont turn on at all). I tried a charged up battery from another wing, nothing changed...
I tried hard resets with the soft keys and reset button, and camera and reset button. Cant access it through my computer using any program (herald-uspl or activsync)
I have nothing at all.
Any ideas other than throwing it off a bridge?
Click to expand...
Click to collapse
You tried pressing the camera button ONLY while pressing the power button? (or the soft reset button.) The ROMs don't stop the phone from turning on unless the installation was botched.

botched install
ivanmmj said:
You tried pressing the camera button ONLY while pressing the power button? (or the soft reset button.) The ROMs don't stop the phone from turning on unless the installation was botched.
Click to expand...
Click to collapse
Yes my install was botched. Computer went into standby mode during flash. Phone was still on (just in the bootloader mode? with 3 colors on the screen). From there I figured I could just re-install the ROM, so I tried. Then the progress bar appeared on my phone and I figured it was all gravy. Then the ROM flasher program on my computer said the file is corrupt and the phone went black.
Now its totally dead wont respond to any combination of button pushes or battery replacements....
Anyone had this problem before?

What does this have to do with Rom development?

routine8 said:
Yes my install was botched. Computer went into standby mode during flash. Phone was still on (just in the bootloader mode? with 3 colors on the screen). From there I figured I could just re-install the ROM, so I tried. Then the progress bar appeared on my phone and I figured it was all gravy. Then the ROM flasher program on my computer said the file is corrupt and the phone went black.
Now its totally dead wont respond to any combination of button pushes or battery replacements....
Anyone had this problem before?
Click to expand...
Click to collapse
If it won't turn on by holding the camera button and then pressing the power button nor the reset button, then it might be gone. Sorry. Although, I've always seen it be recoverable.

No screen?

Hi all,
Perhpas this has been answered before, but I couldn´t find any related thread.
My Rapahel is turned on but can´t see anything on the screen! is totally black.
I know it´s turned on because I can up or down the volume key and I hear the sound and feel the vibrate.
Yesterday was ok, nothing new installed but today I just pressed the power button and nothing!!
This happened me before on Universal, problem was that in some way the phone change itself the brightness to cero.
If I conect to wall charger nothing happens also, not any sign that device is charging.
But still can see something. Now on my Rapahel I cant see anything?
Any help would be much than apreciated please!!
Thanks,

I would
1 softreset
2 hardreset
3 rma

Rudegar said:
I would
1 softreset
2 hardreset
3 rma
Click to expand...
Click to collapse
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!

Hey masters!
A light would be great here!
Sorry to insist!

orb3000 said:
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Click to expand...
Click to collapse
Not a master, but still try to help:
What happend during the soft or hardreset, is the screen showing during the booting ?
How did u do the hardreset, by holding keys ?
After the hardreset u have to get the screen aligned how did u get after that point ?

Help!
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!

orb3000 said:
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
Click to expand...
Click to collapse
Hard Reset the device:
This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset (option 1)
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
3. Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
Hard reset (option 2)
You can also use Clear Storage to reset your device back to factory default settings.
1. On the ?TouchFlo3D Home screen, slide to the Settings tab and then tap All Settings or goto Start and press Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Hard reset (option 3)
1. Pull out the stylus.
2. Turn device OFF.
3. While pressing the CENTER button, turn the phone on with the POWER button.
4. Continue pressing the CENTER button until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
This works on at least some Verizon CDMA phones on which option 1 will not work.
Hard reset (option 4)
1. Pull out the stylus.
2. With the device turned off, press and hold the VOLUME DOWN and CENTER buttons, then press and hold the POWER button.
3. Continue pressing the POWER, VOLUME DOWN, and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel. (works with Alltel touch pro)
Click to expand...
Click to collapse
Ok this is out of the wiki, u see that all methods let u press the vol up button to really start the hard reset than. So on either method do the key presses, wait a while and then press the vol up to start the process.
Its a little try and error because u are not seeing the the actual message to press the vol up. but mybe thats worth to try until u get the point. I think option 3 is a good and easy one.
hopefully the hardreset works, maybe u can try to take a torch or bright sun light to get the display information, if the display itself is not broke u should see a slight shadow of what is written on the display. I had that problem with my wifes phone once and the information was the but its not a reflective display so it was very faint to see.

Finally tho, if all that fails:
RMA = Return merchandise authorization
It means a warrenty return.
It sounds to me like the lcd has croaked. If you dont have suitable warrenty / insurance i'd suggest ebay! i've just found a screen & digitiser for less than £25 (thats for a Raph 100, i honestly dont know if parts are the same on different raph models but i suspect they are)
Good luck!

Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance

orb3000 said:
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
Click to expand...
Click to collapse
Sorry to hear that nothing worked.
Not shure but if the phone fails to hard reset it is not only the screen that is broken ! Take this into account, do u still have warranty, maybe it is better so exchange the whole phone.

Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!

orb3000 said:
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
Click to expand...
Click to collapse
Dont give up, hope that I not get on ur nerves. But still I think a hard reset must be possible.
When u turn ur device of how do you do that ? When u turn it OFF with the power button you have to answer a question on the screen, u do not see the question but is the touchscreen working or how do you know where the YES/NO field is ??
So another way is take the batt out, and when u insert the batt than turn it on with one of the mentioned hardreset procedures.
There is than a question also but this is answered with the Volume UP button.
Maybe u need a second person for helping with the buttons,
The hardreset must be possible somehow, it cant be a broken touchpro

OK I tried with my phone and procedure 1.
VOL DOWN and CENTER with Phone ON
Then Push RESET with the Stylus and hold all three until:
After 5 seconds the Bootscreen showed, after that the message to press VOL UP for Restore.
You do not see the boot screen but just wait the time

You are so kind my friend!
I have tested all the hard reset options but none seems to work
Aparently I can´t do a hard reset
as every time I follow any process and wait 5 sec, then press vol up and it seems that nothing has happened, not even a soft reset!
Pressed center button and vol down, then press the rest button located behind the usb port (the one with a symbol for headphones....)
But nothing happens.
I´lll upload a small video with me doing the process, hope it helps in anyway

Here the link of the video I took with my problem
https://www.yousendit.com/download/ZW9DQ3QxeWFEbUx2Wmc9PQ
Hope this helps in any clue to solve my mysterious problem
Thanks a lot!!

Ok will wait for the video.
Inbetween another option, did u try to flash the ROM.
Can u get a rom to download from ur provider, to do so ?
After the flash the device more or less does a hardreset.
Update:
saw the video, it seems that the phone is not reacting to the center or the reset button. Because when u push reset, even if it is not in hardreset mode, it should do a soft reset right away.
But ur phone is straight reacting to the Vol keys, very strange.
Is the mentioned ROM update an option ??
What is the reaction when u hock the phone to the pc, is active sync working ?
Do you see the internal memory of the phone ?
Remove the SIM and any memory card, maybe they are causing trouble ?

Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,

orb3000 said:
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
Click to expand...
Click to collapse
Here ya go:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
Take the one matching ur cell phone. Check the thread links for more Info.

Thanks, downloading
Tomorrow I´ll try to reflash and post results later
Cheers,
(Anyone? another idea?)
UPDTATE: I conected raphael to my computer and using pocket controller I can see that all is working ok inside but nothing on the screen, or keyboard lights.
I´ll try to hard reset now...
Hope this can help in order to solve my problem
Thanks
Attached the picture
UPDATE 2: I performed the wipe data from the device, this must be exactly as a hard reset I pressume, and nothing....
So now is there anything I can check to see if there is something loose in the connection from device to screen?
Any recommendations on how to do this?
signal from device working perfect simply does not come to screen or even to turn on light on keyboard
Any help is GREATLY apreciated!!!

What rom did you have? I had a similar problem and just had to rma it.

Help!!! after hard spl intalation htc raphael doesn't respose!!!

Please help me guys . I tried to flash my phone. I conetcted the phone with active synch then on compiuter start the hard spl exe. Then i wait 2 minits and on my computer screen pop up new window and there write coz error 260. So then i dosconect the usb from pc , pick up the phone baterry wait 3 second then put battery to the phone but still doesn't response. I can push tur on button or reset button . But nothink!!!! please help what i need to do?

Before you flashed, you did make sure that you installed Microsoft .NET Framework 3.5 (mentioned in that same post)
Did any of the following happen?
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver activate*
(any of these can lead to a bad flash and possibly brick your phone)
Click to expand...
Click to collapse
If so, then you have possibly bricked your phone, my friend
Also, did you wait for it to sync and can you enter bootloader? Hold the volume down key and press the power key/reset button and release the volume down key when you see the multi-color screen.
Additionally, you should be able to remove all cards and your battery and be able to get into bootloader mode by holding the volume down key and connecting to your computer.

R^7Z said:
Additionally, you should be able to remove all cards and your battery and be able to get into bootloader mode by holding the volume down key and connecting to your computer.
Click to expand...
Click to collapse
I tried now to do it i insrt usb to pc and pocket pc then hold volume down key. But nothing. Mayby you have skype i wna to comunicate with you faster. And maybe you can help to me wat can i do now. Thx for answering

How long did you hold the volume down key? I have to wait at least 2 - 3 seconds from when I connect the cable to my device as I have the USB cable already connected to my PC. In other words, hold the volume key down while you are doing all of this, till you see the multicolor screen.

i can hold it 3 or even 6 minits. but you say something about the colours. when i install the spl with synchronization my phone just like died. i dont know wats hapen. and now i dont see any colours on my phone screen. now the screen is black.when i put battery in my phone about after 3 hours my phone back a litle worm. i dont know what to do.

That sounds like you bricked it. Sorry to hear but if you are positive that you did everything as the post I linked you to, mentioned, then it should work. I'm not sure where the process stopped working for you but perhaps you can try retracing the steps? Although, it does sound like you missed a step and now you're phone is bricked. I'm also not sure if you understand what I am saying or asking you to do but I guess if it isn't working, it just isn't working?

Synchronized Well I just shook my phone and the program's EXE file in the SPL. and then there shook far, far away and then threw away so that you do not click anything, not combine any other program. I do and do it. I've been waiting for. Then I look at my phone screen and blacked everything. Then dropped onto a computer error 260th And I do not know what I can do. It does not RESPOND at all. Even though I tried hard reset but still nothing happens. Maybe I should try to flash the phone to make a micro sd? Once uploaded there y card and then pressing a few buttons to be there? Extend the writing maybe?

I'm not 100% sure this will work unless you have HARD-SPL flashed to your device; which is where we stalled out the last time.
Once you have the stock ROM, rename it to RAPHIMG.nbh. Copy just that file to the root of your microSD (preferably a FAT32 formatted microSD but not required). Then, remove the SIM and hold the volume down key while you press the reset button and continue to hold the volume down key till you see the onscreen instructions. According to THIS post, this method should work for flashing a ROM. I am am not able to really say for sure that it does as I never really used or had to use the microSD flashing option.

This doesn't work to maybe i can somehow reinstall the original htc touch pro soft?

The only OTHER way would be through USB from bootloader but if you find it difficult to get that far, I don't know how else to help you my friend.

Maybe you can write a detail lession how can i do this? how can i louch that bootloader . Please help i realy need your help

Try it this way exactly:
Remove your battery, SIM and microSD. Now plug your USB cable to your device (not the computer). Hold the volume key down and plug the other end of the USB cable to your computer and wait till the multicolor screen comes up. If you do not see the multicolor screen, this may be an indication that the USB cord may be messed up (try another in this case), it may be the USB port (try another in this case) OR worse case senario, your phone is just plain bricked my friend...
Additionally, you may need to try another computer.
Once you get into bootloader we will need to go ahead and get hard-spl onto your device.
First, let me know when you get to the bootloader screen...

This doesn't work to ;(((((((((

I don't know what to say, it is sounding more and more like you've bricked your phone. Have you tried another cable / another USB port / another computer?

So, which raphael do you have? CDMA or GSM? And which hard spl did you flash: CDMA or GSM? And did you flash the raphael hard spl, or did you do something like flash the diamond hard spl (or the unlocker)?
If soft resetting the phone doesn't bring it back, then it's probably bricked. I have a feeling you flashed the wrong bootloader for the device.

so if i bricked my phone. No i can just throw it to the dump. or maybe i i send this phone to the repair shop. Maybe they gona repair it?

So, what bootloader did you flash, and what model do you have? If it's the wrong combo, I guess you could sell it on ebay for spare parts. You're not likely to get it fixed.

i have t-mobile mda htc touch pro. and i tried to flash it with Raphael_VZW_HSPL_035

My friend, if you flashed that to your phone, your phone is now bricked from what I can tell. T-Mobile is GSM, that HSPL looks to belong to Verizon which is CDMA. I could be wrong but if you failed to read, then obviously you really didn't need to do it. :enter sad face of choice here:

It's dead. Just put it up for sale on ebay; someone may give you 20-50 bucks for it.

Original Shield tablet disabled

hi every body!
I have an original shield tablet, also it effected by kill switch.
I try to delete the TegraOTA.apk by following the instruction of @Bogdacutu http://forum.xda-developers.com/shield-tablet/general/kill-kill-switch-shield-tablet-xx-t3179489 then it's ok for a month.
But the trouble is when I change the IMEI (successfull) then update OTA3.1.1 via recovery. At this time, any thing also ok, but I did't delete TegraOTA.apk again, then turn on wifi for try to get OTA4.0 directly. unfortunately the tablet was shutting down after one minutes, then automatically boot to recovery before change to black screen . I understood that skill switch is activated!!! Although IMEI different !
Now when connect to PC, it become a APX device, in details http://forum.xda-developers.com/wiki/Nvflash
I try for some of solution but all of them not work. Also solution of @carlompms
good evening,
I received my recall tablet yesterday, before connecting the new one, I installed a new rom, for now I have 2 tables to work.
in the process I do not know what I did my tablet brick in apx mode.
for exit apx mode I connected to the PC, press power button until you hear the disconnect sound on pc(tablet turn off)
Press "Volume Down" -> "Power", hold "Volume Down" and leave Power buttons till device boots
It may work for you too
Click to expand...
Click to collapse
Then if @Thepiewarrior, if you can read this post, please instruct for me that, how can you clear your trouble before: http://forum.xda-developers.com/shield-tablet/help/unlocked-bootloader-rooting-shield-t2995472 tks.
So, after my trouble, every one should remember that, must be deleted the TegraOTA.apk before go to online, then maybe all of solution try to change IMEI may be should't work.
Now, I waiting for some of solution from the expert (such as nvflash...), maybe there're some of member like me...