Please help me - JAMin, XDA Neo, S200 Software Upgrading

My I-mate Jamin, is stuck on bootloader screen.
I've tried the several fixes in the database, and nothing seems to work.
Can someone please help me.

What are your devices SPL and IPL, and what did you do before this?
Read this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery

Related

spl-1.93.0000

Hi
Been searching through posts but couldn't find anything relating to the following hence this topic...I been trying to flash wm6.1 to this device...i had dutty's rtm 4 installed, but decided to upgrade to 6.1, however when i follow the flashing procedure (copy JumpSPL1.56-KAIS.exe to device n run it) it either gets stuck, and gives me a 262 error code then i get the tri-colour boot screen and only flashing to RUU_Kaiser_HK_WWE_1.82.721.1_radio_sign_22.51.88.13_1.27.15.32R2_Ship.exe gets the phone working again...otherwise im stuck with a tri-colour screen...when i do get stuck...i get the following on the tri-colour screen kais130
spl-1.93.0000
cpld-8
thanks
Z
so i am not the only one
to give you a little compensation you can put a new rom by using the sd
method
http://forum.xda-developers.com/showthread.php?t=336158
but please someone help
the answer isn't anywhere here cause i searched a lot
so i read wikis threads but no answer
also i can't change radios like that
Why would you jump_spl, Unless it was to solve the Hardspl issue?
Hard_Spl is the semi-permanent spl you need for flashing roms.

Kaiser Spl Update Problem

Kaiser (official English WM 6.1)
While trying to HardSPL stucked on some kind of error that is not reslved yet in this forum.
After CustomRUU program, now when i turn on my device i see tree color screen with
RUUNBH
KAIS130
SPL-3.28.0000
CPLD-8
and if USB is connected it shows
USB
I tryed almost every solution in this forum, and nothing.
When customRUU says that this process will take 10 minutes I see 0% and nothing else. then communication error on program.
official Update(RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship) says Inavlid Vender ID.
Please help me to solve this. and get back my TyTN.
hammer_xda said:
Kaiser (official English WM 6.1)
While trying to HardSPL stucked on some kind of error that is not reslved yet in this forum.
After CustomRUU program, now when i turn on my device i see tree color screen with
RUUNBH
KAIS130
SPL-3.28.0000
CPLD-8
and if USB is connected it shows
USB
I tryed almost every solution in this forum, and nothing.
When customRUU says that this process will take 10 minutes I see 0% and nothing else. then communication error on program.
official Update(RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship) says Inavlid Vender ID.
Please help me to solve this. and get back my TyTN.
Click to expand...
Click to collapse
There is a Solution to this in the Sticky above where you posted.
Trust me, I wrote the guide
Link here: http://forum.xda-developers.com/showthread.php?t=423486
Ta
Dave
Please post all problems about SPL issues in the SPL threads.
Thread Closed.

plzz.... help me...

hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
thanks in advance
Double Thread, MOD's Please delte this one as the other one is already answered

Urgently Help Needed, Dopod 818pro shows 3 colored screen

I have problem with my 818pro. I upgraded to WM6.1 few months ago successfully with Prophet ROM 19974 M2D. Few days ago suddenly I cant hear anything from phone, but worked well with headset. I read some posts here and try to reinstall the same software which I used few months ago to upgrade from WM5 to WM6.1(with HardSPL G4). The Installation was successful, but when it was restarted, I can only see 3 color screen and USB is written on screen also can see (IPL 2.15.0001 and SPL 2.15.0001). I tried same software few times, but the result is same. The good thing is, I am still able to connect to my PC with USB.
Now I am not able to start my PDA. Every time I restart, It will show same 3 colored screen. and If i connect to USB, it will show on screen USB.
Can Please Please someone help me how can I Install and make it working. Please give me the links as well if possible.
I will be very thankful to you..
Please Help me..
Thanks in advance
Andy
uiell
try flashing back original OS.(wm5)
http://www.htc.com/sea/
[email protected]
Seems HARDSPL not installed.
Information from you.
IPL 2.15.0001 and SPL 2.15.0001
SPL is not HARDSPL already.
The SPL Information , if already HARDSPL should be SPL 2.G4.4PDA. Cos you have G4 Device.
http://forum.xda-developers.com/showthread.php?t=353547
Try to reflash with PDAVIET NoVendor
But you need to go to Bootloader Mode first ( manually). Read how to do it.
Make sure battery enough.
And flash with the ROM above.
And do the HARDSPL again.
http://forum.xda-developers.com/showthread.php?t=405384
The SPL Information , if already HARDSPL should be SPL 2.G4.4PDA. Cos you have G4 Device.
Information for you : Installation, even not HARDSPL could be succesfull. But you will always stuck in Bootloader mode, like you have now.
So Reflash it first like I said and HARDSPL again.
Until SPL information like this SPL 2.G4.4PDA. Cos you have G4 Device.

Upgrading error, please help

While booting my htc neo showing a screen which contains:
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.47.21
OS 2.20.7.35
My problem is I cant upgrade my prophet. I have tried more than 7 - 8 different roms but everytime its showing connection error . and trying to recover the updradation process. please help me.
more details
Hi,
Can you give some more details like what OS you have in PC, does it show USB in the left corner of the phone.
Regards,
V.Balaji

Categories

Resources