plzz.... help me... - 8125, K-JAM, P4300, MDA Vario ROM Development

hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
thanks in advance

Double Thread, MOD's Please delte this one as the other one is already answered

Related

HELP!! dead prophet.. dopod 818 pro.. i am a noob.. help! please!!

i tried to upgrade to i-mate, first i unlock it using "awizard" then i use lokiwiz 02b, then i followed the instructions.. i upgrade to "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe" the process was so smooth until 100% but when restart, i cant boot anymore, it stucks in the scren with black and the white light on the screen keeps on blinking.. help please.. im so frustrated..
spl 2.69 g3
sorry idont remember the other info.. please, please help me..
LISTEN UP, put it again into bootloader mode do a new g3 or g4 update with a new rom, and see if it works.

Urgently Help Needed, Dopod 818pro shows 3 colored screen

I have problem with my 818pro. I upgraded to WM6.1 few months ago successfully with Prophet ROM 19974 M2D. Few days ago suddenly I cant hear anything from phone, but worked well with headset. I read some posts here and try to reinstall the same software which I used few months ago to upgrade from WM5 to WM6.1(with HardSPL G4). The Installation was successful, but when it was restarted, I can only see 3 color screen and USB is written on screen also can see (IPL 2.15.0001 and SPL 2.15.0001). I tried same software few times, but the result is same. The good thing is, I am still able to connect to my PC with USB.
Now I am not able to start my PDA. Every time I restart, It will show same 3 colored screen. and If i connect to USB, it will show on screen USB.
Can Please Please someone help me how can I Install and make it working. Please give me the links as well if possible.
I will be very thankful to you..
Please Help me..
Thanks in advance
Andy
uiell
try flashing back original OS.(wm5)
http://www.htc.com/sea/
[email protected]
Seems HARDSPL not installed.
Information from you.
IPL 2.15.0001 and SPL 2.15.0001
SPL is not HARDSPL already.
The SPL Information , if already HARDSPL should be SPL 2.G4.4PDA. Cos you have G4 Device.
http://forum.xda-developers.com/showthread.php?t=353547
Try to reflash with PDAVIET NoVendor
But you need to go to Bootloader Mode first ( manually). Read how to do it.
Make sure battery enough.
And flash with the ROM above.
And do the HARDSPL again.
http://forum.xda-developers.com/showthread.php?t=405384
The SPL Information , if already HARDSPL should be SPL 2.G4.4PDA. Cos you have G4 Device.
Information for you : Installation, even not HARDSPL could be succesfull. But you will always stuck in Bootloader mode, like you have now.
So Reflash it first like I said and HARDSPL again.
Until SPL information like this SPL 2.G4.4PDA. Cos you have G4 Device.

May Day... my dopod c800 is dead!!

Sory.. this is my new post on this forum! And i'm a new comer on PDA.
Please help!! I've tried to upgrade my dopod c800 to WM6 through activesync.. but (i did'nt know the term "brick" before) my dopod is sudenly dead after error on my PC.
I could go into hard reset, but no to bootloader (CAMERA+stylus). When i push other button after hard reset.. it'll go into green screen with ipl and spl only. If i then push soft reset with stylus, it's turn off.
my ipl/spl is 1.xxxxxx
Please help!!
nurdiman said:
Sory.. this is my new post on this forum! And i'm a new comer on PDA.
Please help!! I've tried to upgrade my dopod c800 to WM6 through activesync.. but (i did'nt know the term "brick" before) my dopod is sudenly dead after error on my PC.
I could go into hard reset, but no to bootloader (CAMERA+stylus). When i push other button after hard reset.. it'll go into green screen with ipl and spl only. If i then push soft reset with stylus, it's turn off.
my ipl/spl is 1.xxxxxx
Please help!!
Click to expand...
Click to collapse
You probably broke your SPL/IPL. The warning says to not flash a third party ROM on your phone if your SPL is lower than 4.xx
If you can get back to the bootloader, you can use the goldcard method to revive your phone. I have not done the goldcard method myself, so I cannot answer any questions on it.

Imate K-Jam Help!!!

Hi Guys
Mmm i kinda F.... up my imate i tried to upgrade to window 6.5 21812 v02
all went well rebooted and now im stuck on a 3colour Screen.
I have tried hard reset and everything still 3 colours
only thing on my screen is IPL 2.16.0001 and SPL 2.16.0001 thats it! not
even an OS. Please help me i love my Imate... and really dont know what to
do.

Imate Spl dead Please Help

Hi every one, I really need help. i just bought an imate spl and wanted to upgrade from wm5 to wm6, i had to find out wheather its a g3 or g4 but. i made a boot by holding the 6key and power botton but this was interrupted now my phone is dead, no charge, no responce to anything even when i try to upgrade again. pls help anything i can do?

Categories

Resources