Guys and gals,
I'm using my infrared Stowaway keyboard frequently, because you can type fast . I have been using it with all versions of wm 6 that I have installed until now. Now with wm 6.1 I have big problems, because this keyboard causes my prophet to hang. I like to know if other people have the same problem or found a solution. What is so different between 6.0 and 6.1 that causes my keyboard stops working?
Any answer will be appreciated and any solution even more!
Related
Hi out there.
I read a lot about updates to WM5 for the Himalaya, but I found almost nothing about speed, compatibility etc. As I made an official (!!!) update for my hx4700 which turned out to render the device almost useless because of some serious speed issues (cleanup process took too much time, the device became slow, so navigation was annoying - it sometimes told me about 100 meters AFTER the junction what to do!), I would like to ask the following questions before trying to upgrade my MDAII:
1. My main reason for thinking about an upgrade is bluetooth. Does bluetooth work more stable with a headset, GPS receiver and Active Sync? Especially the head set causes problems with WM2003.
2. What about speed compared to WM2003? This would be an essential question for using the MDAII as a navigation tool. I am currently using Destinator 6 with GNS TMC receiver (serial port) or Royaltek RTG1001 (bluetooth). Does this work with WM5 as it is my most important application?
3. The HP became a little unstable. What about the MDAII (power switch, memory clean up / flash reorganisation etc)? The flash reorganisation sometimes froze the hp for almost a minute (nice when getting a phone call or using the device for navigation). Any experience here?
4. What about the german language pack for WM5 nocert? Does that work or is it possible to get a german WM5 somewhere - I read the thread but there seems to be no answer on where to get it from. I just got my MDAII from a friend and was to late for downloading it before M$ made xda developers remove all the rom files. Any help or any idea?
I hope this is not too much for now. Thanks for reading this and I hope there will be some answers as well.
Best regards,
Uwe
Hi
I'm wondering if anyone managed to pair S710 with bluetooth keyboard. I was trying to do this with Logiteh diNovo Edge no success .
Altough S710 can discover keyboard it's timing out during pairing after pass number is provided. No problem with S710 on other bluetooth devices (GPS, bluetooth) or connecting logitech to other bluetooth devices (laptop)
Anyone else succeded with external keyboard ?
I know the one included is great but....
Mine works fine with the Stowaway Ultra Slim BT keyboard.
In fact I would go as far as to say it is brilliant
The BT mouse doesnt work though
I am havign the exact same problem pairing my Microsoft Elite BT Keyboard with my HTC Touch Cruise... Did you find a way around this yet? Please PM if you have a solution...
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
johnripper1 said:
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
Click to expand...
Click to collapse
This is an interesting request. I have tried to make my universal work with A2DP using various registry hacks, but I can only get a couple of seconds of sound and then it cuts off. I swear it used to work last summer on a different ROM.
My guess is that changing the core might help.
Anyone can help?
I am not quite sure what my last rom was, but i think it was a 6 Pro Rom and I had the same problems.
YES,have Different Rom
Hi brother there's is a WM6 Roms of UNI with different BT stack,it is use Broadcomm bluetooth stack and work fine on my used,but in first you should know there have some bugs while you are picking up and ending the call with your BT headset's button,you should learn how to use it ,the roms link is
http://forum.xda-developers.com/showthread.php?t=291875 ,it made from helmi_C ,I am very glad to use these rom since i used HP 4150 before and the HP use broadcomm stack,it have great a2DP quailty and can use avrcp profiles. Think it can help you !!
Okay thank you so long.
This BT Stack is avaiable for seperate download as well, but I not sure it if works...
http://forum.xda-developers.com/showthread.php?t=342039
Hi,
When using the Polaris with standard Dutch ROM in a Renault Laguna with built-in carkit system, the sound is very crappy. The paring goes fine, but the sound in the car is crap. Moreover, the other side cannot even hear my voice at all. I apllied the 2 hotfixes from HTC e-club, but that didn't help. Is it possible to change the bluetooth stack from MS to Widcomm or something, or is there any other solution?
Any help is surely appreciated!
Wouter
I had the same problem with my Mondeo (2008). I changed rom to WWE 6.1 (PdaViet V23 - at this moment) and problems disappeared. Perfect reception (both ways) and also all contacts visble through car touch screen..
Thanks a lot for your reply. Good to know that that's an option. I'll keep it in mind. However, I'm kind of hoping for a solution that doesn't require using another ROM, for warranty reasons...
The problem was finally solved by a software update on the car, done by the local renault dealer.
I had a great little app on my Touch Diamond that enabled Bluetooth whenever it was on external power (great for linking to the car bluetooth headset). However, it doesn't seem to work on the HD2.
Having searched the forum, I found this update:
http://www.kixass.net/bluepower/
but again, it doesn't seem to work on the HD2.
I know I can create a front screen button to turn on bluetooth, but I will forget to turn it off when I leave the car, and drain the battery (senility )
Anyone help ?
did you install .net cf 3.5 on your hd2??
One of the first things I did !
Interesting app... did you change the settings to ensure that your HD2 uses net cf3.5 at all times? I remember that there were some registry settings that needed to be made to make sure it does not revert back to 2.0 even after installing 3.5
Thanks for the suggestions mouki and eskasi.
Used netcfcfg to ensure 3.5 is used by default (and overidden for the application), but still no joy.
I tried this on a Topaz running a Leo based ROM... no joy too... I suspect its because of WM6.5.... Was your Diamond running a WM6.5 ROM or 6.1?
It was 6.1. I did upgrade to 6.5 when I was messing about with it, but didn't test this app, before I reverted to 6.1.
Maybe Kixass, or some more competent techie than me is lurking, and will see this post, and amend bluepower for 6.5
Maybe it's because the HD2 uses the broadcom Bluetooth Stack, like the Touch Pro2 does, and apparently it's not a proper implementation compared to the original MS Bluetooth drivers and therefore some bluetooth apps break (like BlueInput.. -_-). I think the Topaz and the Blackstone don't use broadcom and so it isn't broken.
are there other solutions to this? I would also like to have the bluetooth on when the phone is on power...