Before I post the problem, I must say thank you to faria for his rom. It is both fast and stable. The mod and app included are perfect!!
However, one small problem I have is that the Jabra BT320S cannot be found in the BT. I have tried many times..... soft reset...etc.
Can you suggest a workaround?
(I used to use Molski 2.26, the BT worked fine in that rom.)
p.s. sorry, I did post the same question in faria's original thread a couple days ago, but too many "thank you posts" there so my post was probably skipped.
I reported Bluetooth issues over a week ago in his Faria Rom thread about Bluetooth just dropping off as the Handsfree, then you have to go select it again, in the profile to get it back.
Never happened with my WM5, somebody else started a Bluetooth thread about profiles and headsets dropping off..not just one model, different ones.
techlogik said:
I reported Bluetooth issues over a week ago in his Faria Rom thread about Bluetooth just dropping off as the Handsfree, then you have to go select it again, in the profile to get it back.
Never happened with my WM5, somebody else started a Bluetooth thread about profiles and headsets dropping off..not just one model, different ones.
Click to expand...
Click to collapse
First of all, I believe the BT issue is probably common among WM6 and not faria specific. The fact that we report BT related problem with faria's distribution is because there are so many of us wanting to try faria's rom.
Second, my BT problem is not quite the same as the BT problem you guys having. My wizard cannot even find/detect the BT320S after the wm6 update.
So, let's say you guys are dong better
ecchi said:
Second, my BT problem is not quite the same as the BT problem you guys having. My wizard cannot even find/detect the BT320S after the wm6 update.
So, let's say you guys are dong better
Click to expand...
Click to collapse
I would suggest to try to connect anothr BT device, and check if your Wizard "sees" that device. or try your headset on a different device.
regius said:
I would suggest to try to connect anothr BT device, and check if your Wizard "sees" that device. or try your headset on a different device.
Click to expand...
Click to collapse
Hi, regius,
I can still pair my wizard with my PC via BT. And my headset with another phone.
Just not the wizard and headset now.
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
This works flawlessly with 6.0 based ROMs, but with any of the 6.1 flavored ROMs I have tried, the pairing process fails. Is there something fundamentally different between 6.0 and 6.1 in the BT stack that would explain this? Any tweaks you might know of that could fix the problem? Basically, while pairing, the car system sends a "Authorization Unsuccesful" message and the phone rejects the pairing. Because of that I am stuck with 6.0.
I am using my bluetooth car cd player with my Tytn using a 6.1 Dutty's rom. Works perfectly. Try using the april 29 rom just for testing.
i use the rom and radio in my signature and have no problem pairing with car's BT.
No such problem w/ stock 6.1 or Dutty's rom w/ my Jvc BT-1 or Sony Ds-220
No problems with Jabra SP5050 and rom in signature.
ok. it might souns weird but:
I found that paring while your phone is in call (call in progress) will give you better results.
Also, i have seen reports that while phone is in call paring with TomTOM GO will ofer even DUN option while it does not normally offered on majority of WM6.x handsets. (DUN is available on Diamond phones).
I cannot confirm the DUN phenomenon, but paring works def better for me while in call.
I have no logical expanation to this.
hello guys,
i'm new here and I hope im posting in the right section.
My car ist equipped with a bluetooth carkit (Blaupunkt USB/Bluetooth Interface).
It is using the handsfree-protocol (HFP) to connect the phone.
With a couple of "classical" mobiles (basicly nokia and siemens devices) it is possible to access the Phonebook and activate voice recognition by pressing the ptt-button of the carkit.
This is neither done through SimAccessProtocol (SAP) or SerialPortProtocol (SPP) nor by PhoneBookAccessProtocol (PBAP). The Carkit is nearly 2 years old, and beliving some sources i found PBAP is a newer Standard.
This Carkit connects to the phonebook using an extended Handsfree-Protocol.
My HTC Wizard didn't support the carkit at all. After a rom upgrade to some kind of wm6 rom it worked very well execpt for phonebook-access.
Some time ago i found a tool named "JETware Hands-free Extension for Windows Mobile phones" (http://www.jetwaremobile.com) which exented the HFP-Profile used by the Microsoft-Bluetooth-Stack and enabled the phonebook access.
Since my Wizard broke some days ago i bought a new phone. I thought it would be possible to use every WM6-phone with the mentioned plugin.
So i bought a LG KS20. It looks and works very well and i want to keep it. But i have a problem with it. It uses a Widcomm/Broadcom-Bluetooth-Stack (ver. 1.8.7.0600). It seems like it has much better support for bluetooth-devices than the Ms-Stack (and this must be the reason why most people want to use a widcomm-stack instead of a ms-stack).
It also has PBAP and SAP-Plugins.
BUT, since my carkit does not support PBAP or SAP, and the HandsfreeProfile seems to be just supported elementary (PTT-Button only for redial), phonebookAccess does not work on the LG.
The jetware-Extension only supports ms-stacks.
I already spend some nights on gathering information and testing settings but didn't get very far.
There are some registry settings concerning paired devices, where things like HFPfeatures are mentioned. The value is set to 257 and trying to change it to some other values didn't affect anything.
I also downloaded the Widcomm SDK and tryed to find something about these options, but since the SDK is two years old and nothing about HFP is included this also was worth nothing.
My last try was to use the MS-Stack (from wizard) instead of the widcomm-stack. The registry keys for Ms-Stack seem to be present, but all efforts ended up in about 5 hardresets.
Is there anyone here who can help me solving my problem?
Is there a cab file with a ms bt stack i could try anywhere?
Or is there an extension like jetware for the widcomm stack, respectively only a few registry changes are neccessary and someone knowns better?
many thanks,
andi
hi, I have the same problem, with my htc hd 2. have you found any solution?
bump bump bump
same problem with me as well
This is a common problem with M$ and car kits, see here : http://forum.xda-developers.com/showthread.php?t=519676&page=4 and many other threads like it.
I havent tried what he suggests yet, but i know my freelander 2 doesnt connect properly with all cooked roms i have ever tried so far (many!).
Not that this helps you as it is the software you have tried.
I had a great little app on my Touch Diamond that enabled Bluetooth whenever it was on external power (great for linking to the car bluetooth headset). However, it doesn't seem to work on the HD2.
Having searched the forum, I found this update:
http://www.kixass.net/bluepower/
but again, it doesn't seem to work on the HD2.
I know I can create a front screen button to turn on bluetooth, but I will forget to turn it off when I leave the car, and drain the battery (senility )
Anyone help ?
did you install .net cf 3.5 on your hd2??
One of the first things I did !
Interesting app... did you change the settings to ensure that your HD2 uses net cf3.5 at all times? I remember that there were some registry settings that needed to be made to make sure it does not revert back to 2.0 even after installing 3.5
Thanks for the suggestions mouki and eskasi.
Used netcfcfg to ensure 3.5 is used by default (and overidden for the application), but still no joy.
I tried this on a Topaz running a Leo based ROM... no joy too... I suspect its because of WM6.5.... Was your Diamond running a WM6.5 ROM or 6.1?
It was 6.1. I did upgrade to 6.5 when I was messing about with it, but didn't test this app, before I reverted to 6.1.
Maybe Kixass, or some more competent techie than me is lurking, and will see this post, and amend bluepower for 6.5
Maybe it's because the HD2 uses the broadcom Bluetooth Stack, like the Touch Pro2 does, and apparently it's not a proper implementation compared to the original MS Bluetooth drivers and therefore some bluetooth apps break (like BlueInput.. -_-). I think the Topaz and the Blackstone don't use broadcom and so it isn't broken.
are there other solutions to this? I would also like to have the bluetooth on when the phone is on power...