This works flawlessly with 6.0 based ROMs, but with any of the 6.1 flavored ROMs I have tried, the pairing process fails. Is there something fundamentally different between 6.0 and 6.1 in the BT stack that would explain this? Any tweaks you might know of that could fix the problem? Basically, while pairing, the car system sends a "Authorization Unsuccesful" message and the phone rejects the pairing. Because of that I am stuck with 6.0.
I am using my bluetooth car cd player with my Tytn using a 6.1 Dutty's rom. Works perfectly. Try using the april 29 rom just for testing.
i use the rom and radio in my signature and have no problem pairing with car's BT.
No such problem w/ stock 6.1 or Dutty's rom w/ my Jvc BT-1 or Sony Ds-220
No problems with Jabra SP5050 and rom in signature.
ok. it might souns weird but:
I found that paring while your phone is in call (call in progress) will give you better results.
Also, i have seen reports that while phone is in call paring with TomTOM GO will ofer even DUN option while it does not normally offered on majority of WM6.x handsets. (DUN is available on Diamond phones).
I cannot confirm the DUN phenomenon, but paring works def better for me while in call.
I have no logical expanation to this.
Related
I was reading around about issue using BT headset with the Himalaya (W2003 not second edition!)
I read several people who installed the WidComm stack, but as far as I have understood, with this hack there are still problems with the headset profile (still I don't now which!).
Talking about the standard MS stack, I read people using Nokia BT headset complaining about it loosing connection and turning off after 10 min. Is this a nokia only issue?
It seems that Jabra hs are working well. Is there any known problem with the standard MS bt stack?
Thanx to anyone who will/could help me reorganize my mind...
Regards,
Francesco
I have a bluetake G2 headset. When I had 1.72 ROM and installed Pocket Bluetooth Tools it worked perfectly. Currently I'm playing with SE ROMs and have not yet used this headset with it.
Widcomm stack does not support headset/handsfree profile on our device. It can bond with headset, but you would not hear any sound.
I am still using the MS BT stack with rom 1.72.00.
NO Pocket Bluetooth Tools (I would like to know why mamaich uses these with a 1.72 rom . . .)
NO issues whatoever with both Headset (Headset Protocol) or GPS (Serial Port Protocol).
Just rocksteady . . .
Bluetooth Activesync not working after PBT
Activesync over bluetooth doesnt work anymore after loading Pocket blue tooth tools,( it was working perfectly well till loaded PBT) It doesnt even give me the option of syncing via BT ( the option one normally gets when one opens activesync on the device ( tools menu 1) Options 2) via IR 3 ) Via BT ) now all I find is options and activesync via IR.
Bluetooth HS810 Microphone not working
I am using a Motorola HS810 bluetooth headset with WM2000SE-Sin-Merged-v2.0 on an XDA II. When I complete pairing, 3 pop-ups all happen at once asking various profiles supported by the Headset - Serial, Headset & Handsfree. I answer yes to the hands-free. (It's only possible to see the other pop-ups due to the handy alt-tab applcation supplied with this ROM version!)
The earpiece works just fine, but the microphone does not. I need to speak into the mic on the XDA II to be heard.
...I have now reverted to 1.72.00WWE & all is fine. It seems to be a problem with WM2000SE....
Any ideas?
John
XDA II
Motorola HS810
ROM 2.06.00WWE
Radio 1.18.00
ExtROM Sin.Merged.v2.0
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi All,
I just had a brand new Car with Bluetooth. (Citroen C4 Grande Picasso)
With this Bluetooth I should have the abbility to to connect, answer, and scroll trough the contacts, of my phone. I'm using a Wizard G3 with WM6 (Dutch) IPL/ SPL 3.08 and Radio: 1.08. (Radio will be updated soon)
Probelm is: stuff is not working! I can connect the phone to the car with Bluetooth and it is recognizing it. When I make a call or one comes in, the Car sees it and mutes the audio. But that's all. I do not hear anything and I can't be heard. Also the button (on the steering wheel) for contacts doesn't work; meaning: It says: there are no contacts.
Who experienced the same pproblems and more important who solved these?
Hi Jedeve,
I have the same problem with the same car. It worked for me when I first started TT and then automatically my bluetooth GPS mouse was connected and all was working fine. Strnage but true. It looks like if a channel is set open when connecting to the bluetooth GPS mouse and stay open so evrything is working. I also have looked into registry setting son bluetooth if I can find differences by using diff but no strange differences where found.
I also talked to the Citroen dealer and they told that it might be possible that new telephones with the newest software are not able to work correctly with the carkit.
I have a Wizard (I think a G3) with Octavoi 9.2 on it, IPL/ SPL 3.08 and Radio: 2.71.11.
Hi,
same car and same problem here.
It seems worked with WM5 and problem showed after upgrading to WM6.
Calling/answering from car controls ends with total silence most times.
I've noticed that if a call is answered from phone it works most times.
Also car phonebook seems support only latin characters and any contacts with non-latin ones(cyrillic in my case) do not appear on car.
Would appreciate any suggestions/solution to above problems.
Hi,
I have same problem, with same car! with TNT wm6 Roms!
With new TNT 6.1 did not try yet...
Now I have Slim wm6.1 ROM and no problem! With NTS wm6 rom not problem too... works fine!
I have Touch Cruise now with Omnia styled rom
In my car, I have a buildt in bluetooth kit with phonebook and call list sync - it's a pda with windows mobile for autimotive. When a phone is paired with it (and then every time when it connects), it syncs the contacts and the call list with the phone - then you can "remote" the phone from the wheel hands-free. It worked with my prev. phones, and it worked with my HTC with the original rom, and the udk Diamond R8. But it's notsync with M-Amine and this Omnia styled rom. It works as a hands free kit, but the bt sync is not working. Any idea what's the difference between these rom's BT settings?
Hi,
Try downloading and installing a program called jetware something...
I had the same problem with syncing contacts with my car stereo, but after installing this software it works flawlessly.
Thanks, I am also interested because my Bluetooth suffers systematic disconnections with my parrots handsfree Minikit v1.03.
Works, thanks!
Whenever I sync my Touch Cruise in the car (BMW) the interface lags! For example pressing the phone button on the steering wheel takes forever to pull up the phone menu on the car display. Also during a call if I press the hang up button on the steering wheel, it doesn't hang up right away. I have to keep pressing it multiple times. The actual sound quality through the car speakers is fine and the pairing is very quick so no problems there.
Is this a specific problem between the car and the phone? The car handles other bluetooth phones very well, such as the ahem..iPhone. The response when hitting the steering wheel buttons is instantaneous.
I currently have udk Syrius R8 Beta2 with radio 1.59.46.12. I read in one of the other forums on xda that it has something to do with TouchFLO. I disabled the Manila TouchFLO, turned off S2U2, still no luck. Any ideas?
I have similar problems with my XDA Orbit2 with WM6.1 and with my Ignito/Diamond with WM6.1 both with my Peugeot car BT and with Motorola BT headset.
An incoming call sometimes takes 10secs for the audio to be re-routed, PITA
I also found that if I'm running Navigon 6 and an incoming call gets picked up by the car BT then Navigon (or any other GPS app like GPSCycleComputer) gets screwed, the internal GPS gets disconnected.
I'm suspicious that the problem is due to the on chip BT and GPS.
My XDA Orbit (1) with WM6.0 doesn't have the same problem but of course it also has a seperate SirfstarIII GPS.
So, who knows, it could be WM6.1 or it could be the Qualcomm integrated chipset?
I'd like to re-install the original Orbit2 WM6.0 to see if that makes a difference but that's not completely simple as there is no full (official) O2 WM6 file available (AFAIK)
Yeah it's pretty annoying. I assume the udk ROM that I have has all the bluetooth patches, etc. I know other phones don't have this issue, so I'm hesitant to say it's the BMW bluetooth firmware. Something is laggy about the device when paired. I must say though I've never tried pairing it to a BT headset so I wonder what that will be like.
No one else having bluetooth performance issues with their car's built in Bluetooth system?
I have carkit trouble, but don't know why.
My problem is as followed:
I Drive a Renault Scenic with a Carminat Navigation System including Bluetooth Carkit
When I connect my HTC TC Everybody complains that quality is poor. Reception is louzy etc.
When I connect my HTC TD2 the problem dowsn't exist.
When I connect my Samsung Omnia the problem doens't exist ( but other problems in the phone appear)
When I connect my Nokia N73 with the current software I have a lot of problems ( even other then with the HTC )
When I connect my Nokia N73 with an old version of the software I have no problems...
All phones run the stock ROMS ( Windows Mobile 6.1 Pro ) / original Software. I first thought It might be a carkit problem, but as some phones work and others don't I tent to believe that it is a ROM problem (Maybe radio not good)
Is it possible to update the bluetooth driver / firmware?
Problem with HTC TC could be in radio driver.
But since there are problems with other devices, it could be problem with Carminat. You should check with Renault is there software update for it.
But first check if those phones are on Carminat's compatibility list...
The strange thing is that I have the problem with the nokia N73 when the software of the phone is higher then 2.69
According to Renault all Windows Mobile devices are supported / compatible.
I think it is the BT driver or Firmware. But don't know if it is possible to upgrade this to a newer version. Or to test this?
Yes,
My Parrot Mki 9100 works perfectly for phone calls, but doesn't play GPS navigation audio instructions.
Anyone know waht is wrong?
speedyb said:
The strange thing is that I have the problem with the nokia N73 when the software of the phone is higher then 2.69
According to Renault all Windows Mobile devices are supported / compatible.
I think it is the BT driver or Firmware. But don't know if it is possible to upgrade this to a newer version. Or to test this?
Click to expand...
Click to collapse
Have an appointment at the car deakership on Tuesday to see if there is an update or quickfix...
I still suspect the TC though
BT, GPS and GSM are controlled by radio driver.
Please check version, since even stock ROMs use different drivers.
So far, my version is flawless...
Polaris WM 6.1 WWE official (3.13.405.0 WWE 2008-08-21; Radio 1.59.42.15; Protocol 25.85.30.07H)
Click to expand...
Click to collapse
This is the same version I am using....
hi,
I have have quite some problems with BT connection with same radio driver see
http://forum.xda-developers.com/showthread.php?t=570153
I sent it for fixing to the dealer.
Hope a solution.
Went to the car dealer today. They updated the software and modified the microphone volume (lowered it) and the sound quality is improved.
At the car dealer they told me that they have a lot of issues with HTC phones in combination with the different carkits, although the newer phones have less problems. There is a new software upcoming before the end of the year which should solve more problems. but for now the problem is less....
I figured out why (but not the underlying cause) of the sluggishness when the phone is paired to the car. My phone shows very high CPU usage (90%) with services.exe when I look in task manager when the phone is paired. I noticed that using the actual device is sluggish, even just typing up a text. I don't know why that is. The moment I turned off bluetooth, it was back to normal.
Any idea what could be causing that?
Maybe radio driver...
I had such problem when I was on WM 6.0, but it was caused by failing radio chip...