Database Info

DarkForce Rom 2.10.2WWE / Bluetooth problem.

To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose

I have the same problem.
Any solution? Thanks

firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
not yet.
jose

Reboot the PPC the check..I am using Jabra 8010 without any problems

Thanks for your suggestion~
But I reboot many many times~
But still fail~

Same problem here
Headset = Bluetrek G2
I can answer calls with it, but ppl can't hear me

hs 820 ,same problem

i have bt8oo and it works fine , any problem .

firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
Also,this problem happen in i-tech R35d

All, I had problems with every WM6 rom, varying in seriousness. However, this one meant you can't use it at all (Blutrek G2). So I bit the bullet and bought a HBH-PV700 fo 19.99ukp. Have had no problems since.

Bluetooth problem
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose

The Bluetooth needs serious work
Hey ,
I've been using Nokia BH-900 headset and the vioce quialty etc is fine the only problem i am facing is that every few hours the connection just drops and i have to reconnect the bluetooth headset. Also BTGPS is not just working for tomtom or co pilot.
Any suggestions on how it would be possible to use one of the older bluetooth stacks from the original roms would be a great help.
Thanks

We have two families of wm6 roms: universal specific (Indra, Helmi, Jwright, Pdaviet up tu 08) and Athena derived (DarkForce and latest Pdaviet). Bluetooth on them share the same problem present in aku1.x original universal rom: after a random number of houres it turns off and up to now we don't know why?

Plantronics Discovery™ 640 - the problem is the same.

josedias said:
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
Click to expand...
Click to collapse
same problem with all wm6

bluetooth and probs
well hope there is some serious discussion going on in the big wigs for the bluetooth stacks. All of you are using lots of energy in between the 2 stacks of Microsoft and Widdcomm. Personally I prefer widdcomm but please get atleast one of them working for sure with everything
BTW the nokia headsets are working fine with all the WM6 versions I have used. Only the BT goes off after sometime with the blue light still flashing and then even the nokia cant do much.
Any help is worth a million

on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.

beginner said:
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
Click to expand...
Click to collapse
Isn't that due to the fact BT switches off when the uni switches itself on with incomming calls comming out of hibernation

Bluetooth headset profile

Guys,
I did search through the forum and I found several users with the following problem but no solution yet.
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Is there a solution for this?
PS: My bluetooth headset is a Motorola H700.

pms said:
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Click to expand...
Click to collapse
I use a Plantronics 510 (or something like that) and I haven't had any problems with WM6 disconnecting from it like you describe. I have went to answer the phone with it a couple of times and it didn't seem to be linked up, but I just press the button on the headset and it links right up and then answers the call on the next press. But thats only happened a couple of times and I think each of those times I had walked away from my phone so probably went out of range (so I'm guessing the phone just hadn't noticed the BT headset being in range yet).

Try deleting the partnership and setting it up again after a soft reset.
I too have a Plantronics Voyager I think its called and I have not had this problem. I tossed my Motorola BT because the audio level was way too low on it.
pms said:
Guys,
I did search through the forum and I found several users with the following problem but no solution yet.
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Is there a solution for this?
PS: My bluetooth headset is a Motorola H700.
Click to expand...
Click to collapse

golfernutnflorida said:
Try deleting the partnership and setting it up again after a soft reset.
I too have a Plantronics Voyager I think its called and I have not had this problem. I tossed my Motorola BT because the audio level was way too low on it.
Click to expand...
Click to collapse
I tried that and it did not work... Thanks for trying anyway...

Did you try when you tick the hands free that you used the enter button on the D pad instead of the other button?
pms said:
I tried that and it did not work... Thanks for trying anyway...
Click to expand...
Click to collapse

I've reported the same issue with Farias ROM I am using WM6. I use a Plantronics, have to keep going back and selecting it as the handsfree.
Don't know if it a WM6 problem or a Faria problem...annoying I know.

golfernutnflorida said:
Did you try when you tick the hands free that you used the enter button on the D pad instead of the other button?
Click to expand...
Click to collapse
hey.... it worked!!!! At least so far! :-D
I have repaired the headset (but I tried that several times in the past!) and untick the hands free and ticked it again and now I have tried several times and it seems that it is working.
I do not understand way. Can you explain I this non-sense procedure solves the problem

I had a little problem pairing my Plantronics Explorer 340 with my device, but after the pairing, it did work without any problems. apparently some WM6 roms out thre are having this issue. I would suggest re-flash your device and se how it works

I have a Plantronics 655 and don't have this problem. The only thing out of the ordinary that I do when pairing though is re-name the headset (defaults to 6xxPlantronics, I change it to Plantronics 655)
However, I experience a slightly different problem. My BT headset and handset don't automatically re-pair after returning in range or resetting the handset. Anyone else experiencing this?
Everytime I walk out of range or reset my phone, I would have to turn off my headset then turn it back on for the two to pair back up. I sometimes forget and when I hear the handset ring, I pick up w/ the headset only to find that they're no longer paired. Is there a way to have the two automatically pair back up? I never had this problem when I was using AKU3 roms and the stock Cingular 2.25 ROM.

Parrot CK3100 BT carkit and WM6 problems

Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.

BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-

Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.

BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?

I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.

I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!

Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...

tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.

BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/

Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )

Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards

Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)

I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks

i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't

I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.

With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5

I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all

The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...

BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.

xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...

Is there a WM 6 ROM with differnet BT stack

Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?

johnripper1 said:
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
Click to expand...
Click to collapse
This is an interesting request. I have tried to make my universal work with A2DP using various registry hacks, but I can only get a couple of seconds of sound and then it cuts off. I swear it used to work last summer on a different ROM.
My guess is that changing the core might help.
Anyone can help?

I am not quite sure what my last rom was, but i think it was a 6 Pro Rom and I had the same problems.

YES,have Different Rom
Hi brother there's is a WM6 Roms of UNI with different BT stack,it is use Broadcomm bluetooth stack and work fine on my used,but in first you should know there have some bugs while you are picking up and ending the call with your BT headset's button,you should learn how to use it ,the roms link is
http://forum.xda-developers.com/showthread.php?t=291875 ,it made from helmi_C ,I am very glad to use these rom since i used HP 4150 before and the HP use broadcomm stack,it have great a2DP quailty and can use avrcp profiles. Think it can help you !!

Okay thank you so long.
This BT Stack is avaiable for seperate download as well, but I not sure it if works...
http://forum.xda-developers.com/showthread.php?t=342039

Bluetooth Headset dosn´t work

Hello
my Bluetooth headset dosn´t work with my polaris. When i`m using a Bluetooth headset and the HTC Touch Cruise goes to sleep/idle mode, the Bluetooth connection becomes unsteady in certain circumstances. The Bluetooth headset may reconnect and disconnect intermittently. I want to install the Hotfix from HTC Website but i dosn´t work with bepe´s rom wm 6.1 ger. Can sombody help me to fix the Problem?
Greetings
Aragorn

Bluetooth doesn't work with headset
I have the same problem. If I find out the way to solve this, please help us. Tks

their is a BT hotfix on the htc support site that may cure it ...
havent tried it yet, will be testing on works pda's today
Gaz

As they said, they have the bebe ROM and it won't accept the HTC update to correct this issue, guess you missed that?
Your best bet is to read the bebe thread and see if this issue has been brought up. If it hasn't, post about it there...
knobbyhtccruise said:
their is a BT hotfix on the htc support site that may cure it ...
havent tried it yet, will be testing on works pda's today
Gaz
Click to expand...
Click to collapse