Dead S200 red/green/blue screen & no usb - JAMin, XDA Neo, S200 Software Upgrading

Hi,
I have tryed to flash my S200 and now it's dead.
when I do a hard reset I got red/green/blue screen with
2.10, 2.20 in top left corner
and usb down in the corner but it's not working.
What shall I do?

Related

a lot of problems on a magician

i have a big problem...
one friend gived me a magician.
everytime i soft-reset it, he makes me a hard reset.
everytime i turn it on, or charge it, appears "SERIAL" on top and v1.00on the bottom.
the on/off botton seems not to work.
what can i do?
so when you do a hard reset what happens ?

Help with a brick AT&T/ HTC 8925

I have an AT&T/ HTC 8925 that during flash it stopped and now I have the red, green blue and white screen. I followed the instructions on the screen for recovery and when I remove the battery and re-install it the screen comes back to the multiple color screens. Now even though my computer knows that I plug in the USB and the PDA screen goes from serial to USB, you still can not flash it. Is it a lost cause or is there someone that knows what to do? Help

My Dopod 818 pro is dead...NEED HELP !!!

My prophet is dead...
I try to upgrade my prophet to WM6...work sucessfull
When i try install MORANGE in my prophet its error (hang)..so i try to reset.
After i push the reset button my prophet is dead...i can't do anything.
I try hard reset is still not working...i try to plug in charger -> RED LED indicator not show.
It really..really DEAD PROPHET...
Please help me with my prophet.
It still dead until now...
novian said:
My prophet is dead...
I try to upgrade my prophet to WM6...work sucessfull
When i try install MORANGE in my prophet its error (hang)..so i try to reset.
After i push the reset button my prophet is dead...i can't do anything.
I try hard reset is still not working...i try to plug in charger -> RED LED indicator not show.
It really..really DEAD PROPHET...
Please help me with my prophet.
It still dead until now...(
Click to expand...
Click to collapse
try another battery.
still not work...
dioxda2 said:
try another battery.
Click to expand...
Click to collapse
novian said:
still not work...
Click to expand...
Click to collapse
how can you hard reset?
do you really know how to?
if it still can turn on, will be recoverable...
PROPER INSTRUCTION
1. Press POWER button to off unit (if unit is ON)
2. Press CAMERA and COMM buttons simultaneously
3. While holding down CAMERA and COMM buttons, use stylus to poke the RESET button at bottom of unit.
4. Release pressing of the RESET button, and continue to hold on to CAMERA and COMM buttons until message appear on the screen asking you to press the SEND (green phone button) to continue.
thats right ?
will be recoverable ?....Oh My God..
it's really can't do anything else ?
because my prophet still can not show the light charger..still DEAD
dioxda2 said:
how can you hard reset?
do you really know how to?
if it still can turn on, will be recoverable...
Click to expand...
Click to collapse
novian said:
PROPER INSTRUCTION
1. Press POWER button to off unit (if unit is ON)
2. Press CAMERA and COMM buttons simultaneously
3. While holding down CAMERA and COMM buttons, use stylus to poke the RESET button at bottom of unit.
4. Release pressing of the RESET button, and continue to hold on to CAMERA and COMM buttons until message appear on the screen asking you to press the SEND (green phone button) to continue.
thats right ?
will be recoverable ?....Oh My God..
it's really can't do anything else ?
because my prophet still can not show the light charger..still DEAD
Click to expand...
Click to collapse
you are right, those step are very precise
so, can successfully hard reset?
PS. if the battery is not flat, please don't plug the power cable at the beginning.......
plug later when the device goes fine ( sometimes the device won't continue to boot if the power cable was plugged...
not successfully with hard reset..the prophet just blank screen...nothing else.
i try connect my prophet to pc its not detect...
how can i know the device goes fine?
for your information..if i try charge the batery (with no RED LED indicator) for may be 2 hour and then i unplug the charger...after that i try remove the batery the device show the white screen for a second like blitz...just like that.
i try insert he batery againt and doing hard reset still nothing...i plug the charger still light off...hiks...hiks...
dioxda2 said:
you are right, those step are very precise
so, can successfully hard reset?
PS. if the battery is not flat, please don't plug the power cable at the beginning.......
plug later when the device goes fine ( sometimes the device won't continue to boot if the power cable was plugged...
Click to expand...
Click to collapse
novian said:
not successfully with hard reset..the prophet just blank screen...nothing else.
i try connect my prophet to pc its not detect...
how can i know the device goes fine?
for your information..if i try charge the batery (with no RED LED indicator) for may be 2 hour and then i unplug the charger...after that i try remove the batery the device show the white screen for a second like blitz...just like that.
i try insert he batery againt and doing hard reset still nothing...i plug the charger still light off...hiks...hiks...
Click to expand...
Click to collapse
Too bad....., it does look like hardware damage.....
needs to bring to repair shop or nothing else..... good luck~~~
update condition :
my prophet if i plug usb cable..my prophet just blink-blink (white screen for a second..continue)
i press reset blink-blink STOP...but if i release reset buton blink-blink againt.
any solution for this situation ?
any one can help me ?
help!!!
i tried to upgrade to i-mate, first i unlock it using "awizard" then i use lokiwiz 02b, then i followed the instructions.. i upgrade to "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe" the process was so smooth until 100% but when restart, i cant boot anymore, it stucks in the scren with black and the white light on the screen keeps on blinking.. help please.. im so frustrated..
spl 2.69 g3
sorry idont remember the other info.. please, please help me..
R.I.P Dopot 818 Pro
I also have the same problem. First time I was interested with the upgrading proses by looking around the forum. They said noting would be wrong, nice display, try it. But actually the upgrading process to wm6 or wm6.1 are not stable. My Dopot 818 Pro also are now dead coursing by the upgrading from wm5 to wm6. Before upgrading I've asking around, many of the expert said do not upgrade, its not stable, but I just would listen and done the upgrading proses and that was the last time I saw my prophet functioning and its dead now..
I using a very simple basic Nokia phone now & I happy about it, I will not do the unstable upgrading again in the future..
I have the same problem, but donĀ“t have solution :-(
I am finding the solution as well.
novian said:
update condition :
my prophet if i plug usb cable..my prophet just blink-blink (white screen for a second..continue)
i press reset blink-blink STOP...but if i release reset buton blink-blink againt.
any solution for this situation ?
Click to expand...
Click to collapse
sorry im trying to hard reset the phone too,can anybody tell me which is the COMM button,i cant find it,thanks
well?......
SicilianBoy said:
sorry im trying to hard reset the phone too,can anybody tell me which is the COMM button,i cant find it,thanks
Click to expand...
Click to collapse
Is yours a Prophet?
Should be right next to the volume slider....

imate jamin boot up screen

oh my head hurts from this. manager came in saying that his imate jamin is not working .. typical managers. it turns on but stays at the htc innovations boot screen.
tried the original shipped ROM but comes up with Error 260: Update Error. USB ok as there's a orange charge light and shows up on bottom left of tri colour screen. tried on a couple of different pc both running xp pro sp3. i've wiki, searched, did resets, etc but still no go.
i just get the following at the tri colour screen
ipl 1.00
spl 2.13
help please? thanks in advance

[Q] verizon htc tp2 rom update

Please help!
My HTC TP2 freezes at start up with a white screen and the HTC Logo and some details in red at the bottom:
B 80
R 4.49.25.17
G 61.44tc.25.32U
D 1.86.67102
No USB connection can be established.
What happened:
1. Tried to update from original WM 6.1 to WM 6.5 by using the official HTC ROM update utility. Seems like the phone was in pilot mode during the update. the updtae process was completed and i clicked finish. the device was to restart and the white screen problem started.
2. Restarted phone and multicolor screen appeared and stayed. After connecting with USB cable again "USB" appeared at the bottom but cannot connect to the activesync no more
3. Restarted again (by removing the battery and hit power button) and state reached like described above (HTC TP2 freezes at start up with the white screen and the HTC Logo and some details in red at the bottom).
4. Performed a hard reset but did not help.
What can I do to bring the phone back to life?

Categories

Resources