I have an AT&T/ HTC 8925 that during flash it stopped and now I have the red, green blue and white screen. I followed the instructions on the screen for recovery and when I remove the battery and re-install it the screen comes back to the multiple color screens. Now even though my computer knows that I plug in the USB and the PDA screen goes from serial to USB, you still can not flash it. Is it a lost cause or is there someone that knows what to do? Help
Related
Hi all,
I have a Tornado which is either broken or bricked. When I turn
the phone on, I see the initial HTC screen, and then the screen
goes black after a few seconds and I hear a soft "tock" sound
from the phone and sometimes the phone restarts this, sometimes
it just stays at the black screen.
A few times I managed to put it into bootloader mode, but I can't
seem to be able to do it anymore.
What may be the problem? Dead battery? I have two and both do
the same. When I plug it to the wall charger, it seems like it is fully
charged (the wall charger has a led to show that).
None of the LEDs on the phone are working. Only sometimes
when the phone is turned on, a red blink for the power.
Connection to PC doesn't work in any condition. So I am trying to
figure out a way to flash it using the SD Card. Do I have to have a
nbh file to flash using the SD Card? All roms I downloaded come in
nbf format. Is there a way to convert nbf to nbh? And does
anybody know how to flash a Tornado from the SD?
my screen goes white and does not load the program.
it shows the brand when i hard reset my imate jamin but after that it all goes to white.
the worse thing is, i cannot install the rru prohit that is use to fix it.
the computer does not even recognize or detects that the device is connected. ]
any help will be much appreciated.
me too, after change rom from wm6.1 to else is white screen
pls help
Hi, I am STUCK!! My phone (HTC Touch Pro) gets stuck in the soft reset mode. I was able to get it to the tri-color screen, but could not get any further than that. Tried to follow some directions by going through the connections and settings, but it could not find the usb port. I need help, if you could get me past this so I could reset my phone, that would be great!!! I am brand new at this and know nothing. Thanks, Nikki
My red screen says:
RAPH800
SPL-0.36.0000
MicroP-Hermann (LED) v0C85
Green screen says:
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20
Nothing is in the blue screen
Thanks for any help!!!
try to hard reset it, check it here http://forum.xda-developers.com/showthread.php?p=2643414 or http://forum.xda-developers.com/showthread.php?p=2525584
for more informations, visit the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael
HTH
Have you flashed anything to it? I'm not that familiar with cdma devices. If the hard reset doesn't work, then try taking the battery out for a while, then putting it back in and hitting the power button. If nothing works, and you haven't done any flashing, just take it back for an exchange.
how to run rom when HTC pro is frozen, won't boot or cuts on n off
--------------------------------------------------------------------------------
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
Please help!
My HTC TP2 freezes at start up with a white screen and the HTC Logo and some details in red at the bottom:
B 80
R 4.49.25.17
G 61.44tc.25.32U
D 1.86.67102
No USB connection can be established.
What happened:
1. Tried to update from original WM 6.1 to WM 6.5 by using the official HTC ROM update utility. Seems like the phone was in pilot mode during the update. the updtae process was completed and i clicked finish. the device was to restart and the white screen problem started.
2. Restarted phone and multicolor screen appeared and stayed. After connecting with USB cable again "USB" appeared at the bottom but cannot connect to the activesync no more
3. Restarted again (by removing the battery and hit power button) and state reached like described above (HTC TP2 freezes at start up with the white screen and the HTC Logo and some details in red at the bottom).
4. Performed a hard reset but did not help.
What can I do to bring the phone back to life?
I bought an HTC shadow 2009 version off of ebay for $8 and it has a black screen issue. I can tell it boots up because although the screen is black, it flashes on and off as if it were changing boot animations, and then once it is booted the green led flashes like it has a text and the charging light is on, also i can get files off of it from my computer. So it shouldnt be a software issue, is what im thinking.. but i replaced the screen that it came with and it is still black. Does this sound like a software issue to anyone? Also when i try to hard reset the phone it goes through the original boot process it doesnt seem like it will allow me to hard reset it.. anyways all the searches i have done so far have suggested hard reset or replace screen. I have tried both and nothing has worked. Anyone have any suggestions?