I need help. I have a wizzard/vario. Recently installed TNT Profesional + htc home rom on it. Its worked fine for over a week. Suddenly it switched itself off, and now its stuck on the "Windows mobile 6 pro" boot screen. its ipl is 2.21.001 erm its got the whole flashing light to show its active, when i press a button, they all iluminate, it just doesnt leave the boot screen tho. Desperate for help and will try anything! Thanks...
Related
I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal
Hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however I didnt install any radio How to get back to rom
Thank you in advance
any solution to this problem?? i am having same issue. thnx
Can you post step-by-step what you did?
Did You make task29 before magldr?
White screen after magldr 112 - help !
titjukaz said:
hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however i didnt install any radio how to get back to rom
thank you in advance
Click to expand...
Click to collapse
hello
i have the same problem !
have you found the solution ?
Please , answer me ....
Thanks
alessanro - venice - italy
same problem here please help
After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen
You most probably have an older incompatable Radio on your phone. The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine
White screen of death
I have the same problem.
Installed:
* HardSPL 3.00
* Radio 2.15.50.14
* MAGLDR 1.13 - here I got the same problem as all in this thread: white screen with HTC logo after reboot hanging forever. MAGLDR doesn't load by switching off, pressing and holding volume down and power buttons.
Any solution to this?
Wow! Got MAGLDR installed finally… after several cycles of different installations.
Here is what I found:
My original SPL was 3.00-0000, so previously I tried installing 3.00-HSPL. That didn’t work.
Now I installed exactly 2.08-HSPL version and here we go – I see MAGLDR menu now!
Good luck everyone! I hope this will help others with the same problem. I think we all need to read carefully (about 2.08) )))
Hi all,
I really need a help here. I have a G1 rooted with CM rom ver5. it was working fine since 3 months but suddenly now the phone doesnt boots up, it goes to white screen with 3 droid skaters and highlight on Hboot. It is freezed then and nothing can be done. I removed battery and tried booting by home + power ; camera+power etc etc . nothing happens it goes to that screen only. i have amons recovery and also nand backups in sd card. but the system doesnt let me go any where!! Please help......
hello everyone..i got a htc fuze p4600 phone..it has got TAEL ROM in it n was workin quite normally..recently i installed a software called "SPB keyboard"..installation was successful n while typin,my phone has got stuck n remained still for more than 30 minutes..hardware buttons didnt worked too..so,i removed the battery n tried to switch it on,after re-insertin it..but,it simply showed the AT&T welcome screen n remained still for a while..after sometimes,it displayed a black screen with the followin message..
YOUR DEVICE IS UNABLE TO BOOT UP BECAUSE OF INSTALLATION OF AN UNTRUSTED SOFTWARE OR IT WAS NOT SHUT DOWN PROPERLY.PRESS SEND KEY TO RESET YOUR DEVICE OR PRESS ANY OTHER KEY TO CANCEL.
i dont know how to fix this problem..please help me out with your answers..
GANIZ