Related
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Ok guys need help.. i just flashed my g4 wizard with the WM6 from faria. It went all the way to 100 percent and said my phone was ready and complete. But for some reason when it rebooted iot just takes me back to the three colored screen and wont boot. What did i do wrong? i did exactly as the intructions said. my ipl is 2.26.0001 and m spl is 2.26.0001 i have a tmobile phone. thanks alot
Did you follow the instructions for a G4? Is it unlocked?
joeyurri said:
Ok guys need help.. i just flashed my g4 wizard with the WM6 from faria. It went all the way to 100 percent and said my phone was ready and complete. But for some reason when it rebooted iot just takes me back to the three colored screen and wont boot. What did i do wrong? i did exactly as the intructions said. my ipl is 2.26.0001 and m spl is 2.26.0001 i have a tmobile phone. thanks alot
Click to expand...
Click to collapse
joeyurri said:
Ok guys need help.. i just flashed my g4 wizard with the WM6 from faria. It went all the way to 100 percent and said my phone was ready and complete. But for some reason when it rebooted iot just takes me back to the three colored screen and wont boot. What did i do wrong? i did exactly as the intructions said. my ipl is 2.26.0001 and m spl is 2.26.0001 i have a tmobile phone. thanks alot
Click to expand...
Click to collapse
which instructions did you follow?
Did you pay the unlocking website to get your phone CID unlocked? If not then you are most likely not CID unlocked and this is why you failed. You have a G4 device and to my knowledge the only way to CID unlock is by paying.
I folowed faria instructions and i did not pay to have it unlocked. Is it too late to still do that. Is there a way to recover my phone?
joeyurri said:
I folowed faria instructions and i did not pay to have it unlocked. Is it too late to still do that. Is there a way to recover my phone?
Click to expand...
Click to collapse
Did you follow the G4 instructions and use the shelltool utility?
We need specifics if you want help.
Honestly no i didnt. I didnt even chech if it was unlocked. Can i still get it unlocked and reflash the ROM?
joeyurri said:
Honestly no i didnt. I didnt even chech if it was unlocked. Can i still get it unlocked and reflash the ROM?
Click to expand...
Click to collapse
Not to be mean, but did you read anything before flashing your phone? If you're in the bootloader (tri colored screen) you're not bricked, so that's good. You will need to download and install your stock carriers ROM to save the phone.
BUT HURRY BEFORE YOUR BATTERY DIES!!
TaurusBullba said:
Not to be mean, but did you read anything before flashing your phone? If you're in the bootloader (tri colored screen) you're not bricked, so that's good. You will need to download and install your stock carriers ROM to save the phone.
BUT HURRY BEFORE YOUR BATTERY DIES!!
Click to expand...
Click to collapse
I only read the intructions on how to flash it. But next time trust me ill read all the forum. Thanks for your help. Another question my carrier is t-mobile. Where can i find my stock carriers ROM? After I install can i still unlock it first and then istall the WM6?
joeyurri said:
I only read the intructions on how to flash it. But next time trust me ill read all the forum. Thanks for your help. Another question my carrier is t-mobile. Where can i find my stock carriers ROM? After I install can i still unlock it first and then istall the WM6?
Click to expand...
Click to collapse
You can download the stock ROM from T-Mobile's website. They may have you run through some hoops to get it. Or you can just use this one...
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Once you've done that, you won't need to unlock your phone to just flash WM6 on it. You will need to read this though...
http://forum.xda-developers.com/showthread.php?t=293480
Take your time and read it carefully. Also, read the Wiki (it has a wealth of information).
TaurusBullba said:
You can download the stock ROM from T-Mobile's website. They may have you run through some hoops to get it. Or you can just use this one...
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Once you've done that, you won't need to unlock your phone to just flash WM6 on it. You will need to read this though...
http://forum.xda-developers.com/showthread.php?t=293480
Take your time and read it carefully. Also, read the Wiki (it has a wealth of information).
Click to expand...
Click to collapse
Ok OK
I spoke to T-mobile got the software ran it and the phone is working again. I unlocked the CID and installed the WM6. This time my phone booted but just got a white screen. It ligts up and it makes a beeping sound but just a whie screen. Thanks
joeyurri said:
Ok OK
I spoke to T-mobile got the software ran it and the phone is working again. I unlocked the CID and installed the WM6. This time my phone booted but just got a white screen. It ligts up and it makes a beeping sound but just a whie screen. Thanks
Click to expand...
Click to collapse
How did you CID unlock it? There's only one way to do it on a G4, and that's by paying http://www.imei-check.co.uk/ to do it for you.
I have a G4(TMOBILE) as well and it is locked. You can flash to WM6, but you need to do it using Shell tools. Follow the link and read up.
http://forum.xda-developers.com/showthread.php?t=293480
Fabe
Hi..
I'm owner of Qtek 9100. Everything clear abotu this phone..unlocking, upgrading...no problems at all.
Now, i have Qtek900o (Universal) from my friend.
I want to make upgrade on WM6.
Just asking if i'm right...
1st step : CID unlock
2nd step: new bootloader
3rd step: one of known WM6 roms
Is this coorect?
I found link on ftp for CID unlock and bootloader for universal, but link don't work ...this is link..
ftp://xda:[email protected]/Uploads/Upload/HTC_Uni_Unlock_v1.7z
If my steps of upgrading are correct, can anyone please give me link for CID unlock and bootloader tool.
TY very much!
bye, akulp
Please help ! Universal
Hi
I seem to be having the same issue but no one seems to reply to my thread either... I tried to go through the CID unlock on the wiki but I keep getting an error device not connected whenever I try to put 'Button' ROM on ... also I click on the link to CID unlock on the WIKI and get a load of instructions for the Wizard, im not sure if this is correct... could someone out there please give us some help ? all id like to do is get WM6 on so I can get MSN working on my phone..... Thanks in advance ... James UK
jstubbings said:
Hi
I seem to be having the same issue but no one seems to reply to my thread either... I tried to go through the CID unlock on the wiki but I keep getting an error device not connected whenever I try to put 'Button' ROM on ... also I click on the link to CID unlock on the WIKI and get a load of instructions for the Wizard, im not sure if this is correct... could someone out there please give us some help ? all id like to do is get WM6 on so I can get MSN working on my phone..... Thanks in advance ... James UK
Click to expand...
Click to collapse
Same trouble here,help ?
Please can someone out there give us a bit of there time and help ... I dont think we are being noobs, we have done what is said on the board.... PLEASE! Thankyou
Please Help
Please can someone out there give us a bit of there time and help ... I dont think we are being noobs, we have done what is said on the board.... PLEASE! Thankyou
I have never Cid unlocked. I just use the patched maupgrade_noid.exe to flash as it bypases the CID check.
Also my G4 had the latest bootloader (2.01) in when I got it.
Be careful when changing the bootloader as if you get it wrong you have a very expensive paperwieght.
Psi
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?
i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.
ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.
mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!
Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.
Hello everybody!
After update my Optimus 7 E900 (LG) cant be unlocked with Chevron.My ZUNE client on PC (Windows 7 Ultimate OS 32 bit) havent restore points,but i made when i update the phone..My ZUNE client havent account login and marketplace,but its the last zune client with all updates..
After update,my phone is very slow..Now i want restore my 7004 OS Version,but i dont have restore points i dont know where are there..I go settings>phone>update but there havent restore points..only message your phone is up to date (7.0.7008) . Can you help to get old OS version (7004) ... I try factory reset,reset your phone,MFG .. And nothing.. Erase everything (music,video,pictures,apps) but OS version is 7008...i want 7004 .. CAN YOU HELP ME PLSSSS (((
OMG me to well I want to downgrade to 7004 to unlock again
I updated went to 7008 my phone got locked and rendered my sideload apps useless
I reset my phone and nothing
OMG. Go to the Optimus 7 forum and flash a stock 7004 ROM.
You can unlock NoDo via MFG btw, so if unlocking is your issue you don't need to flash anything.
I have the same problem , My device is HTC HD7 , it's updated with NoDo and I can't downgrade to 7008 , my main reason is unlocking , is there a way to unlock it now?
hello
Someone will help us ,i have the same problem ...
Please tell us how to reverse to 7004 version so we can unlock.
Thanks in advance.
Flash an older 7004 ROM onto it, like people keep telling you.
Mate i understand what do I have to do ... I dont understand how to do it and what to downlaod.
Is the same if you were never done anything to fix your car engine and people jest tell you ,"ok just do it yourself no matter what" ...if there is no manual you won't go far is that right ?
So where is the manual how to do it ? I will do it myself if there was manual "how to " I wouldn't come here and ask for help ....
So will you help us please ?
Thank you
zhelev81 said:
Mate i understand what do I have to do ... I dont understand how to do it and what to downlaod.
Click to expand...
Click to collapse
Did ya read TheOnly1 reply ?
http://forum.xda-developers.com/forumdisplay.php?f=828
http://forum.xda-developers.com/showthread.php?t=974874
http://forum.xda-developers.com/showthread.php?t=935578
Plenty of reading material.
I have windows 7 phone not LG mate ...
Look here :
http://csmega-bg.com/server/screens/htc/DSC00702.jpg
Please point me to the correct file i need to downlaod i dont want to screw up my phone .
And "The only 1" post is just some sintence not any links not any explanation .
Thank you
zhelev81 said:
I have windows 7 phone not LG mate ...
Click to expand...
Click to collapse
OP refers to a a Optimus 7, hence our replies.
A quick glance to the HD7 forum shows a multitude of posts on how to flash and unlock:
http://forum.xda-developers.com/forumdisplay.php?f=783
http://forum.xda-developers.com/showthread.php?t=888747
http://forum.xda-developers.com/showthread.php?t=876451
I dont think you helping me at all ,you just trow me to read 1000 pages and i am new to this thing ... i kindly asked you to give me exactly whta i need to return the phone to 7004 so i can unlock it.
i gave you picture abouve of my Phone system .... and i will say one more time .I AM NEW TO THIS and i dont know what to do so please one more time navigate me like this :
1.Downlaod this soft : link
2.Flash it like this
3. do this to unlock
Is it so difficult for you mate ? Please help me to unlock .
Thanks
zhelev81 said:
I dont think you helping me at all ,you just trow me to read 1000 pages and i am new to this thing ... i kindly asked you to give me exactly whta i need to return the phone to 7004 so i can unlock it.
i gave you picture abouve of my Phone system .... and i will say one more time .I AM NEW TO THIS and i dont know what to do so please one more time navigate me like this :
1.Downlaod this soft : link
2.Flash it like this
3. do this to unlock
Is it so difficult for you mate ? Please help me to unlock .
Thanks
Click to expand...
Click to collapse
Nobody is going to do your work for you. Don't be lazy.
http://forum.xda-developers.com/showthread.php?t=876451
The link provided to you has big massive blue lettering saying:
"C. Windows Phone 7 ROM Flashing Instructions"
With steps 1 to 9.
And if you're going to talk like that to someone who was trying to help you, you won't get very far at all
edit: And if you still don't know what to do, then you shouldn't be flashing any ROMs at all because you can break your phone.
i am sorry .... i just dontwant to **** up my phone ...
Do you knw how to back it up first ,i want to return it if something goes wrong .
Which rom i have to use ? The phone came from USA and is from T-mobile
Thank you in advance
zhelev81 said:
i am sorry .... i just dontwant to **** up my phone ...
Do you knw how to back it up first ,i want to return it if something goes wrong .
Which rom i have to use ? The phone came from USA and is from T-mobile
Thank you in advance
Click to expand...
Click to collapse
With any flashing/unlocking of a mobile phone there are risks involved... if you are not prepared to accept those risks, keep your phone as is and move on.
No one here is going to hold your hand and do a step-by-step (plenty of FAQ's already out here), you have already plenty of information in our forums and in the web to be able to do this yourself, and for more specific HD7 questions, start visiting the appropriate forum.
G'luck.
zhelev81 said:
i am sorry .... i just dontwant to **** up my phone ...
Do you knw how to back it up first ,i want to return it if something goes wrong .
Which rom i have to use ? The phone came from USA and is from T-mobile
Thank you in advance
Click to expand...
Click to collapse
You cannot back up your phone using this method. Zune will take a backup when you upgraded to 7390, but I'm not sure you can use this when you flash a new ROM.
Since you are TMOUS & reading the instructions from the post by ansar, you would need both of these:
1. RUU_Schubert_TMOUS_1.20.531.01_Radio_5.51.09.11a_2 2.31.50.09U_by_ansar
2. RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_2 2.32.50.10U_by_ansar
Again, make sure you read the instructions carefully & search through that thread for any issues because there is always potential to break your device.
ok thank you ,just one more time :
http://csmega-bg.com/server/screens/htc/DSC00702.jpg
Did you see this picture ??? this is my phone ... any strange things here ?
Edit : and why do i need those both files ??? .... i did not find any info why are 2 files ... can you please tell me ?
Thank you again
zhelev81 said:
ok thank you ,just one more time :
http://csmega-bg.com/server/screens/htc/DSC00702.jpg
Did you see this picture ??? this is my phone ... any strange things here ?
Edit : and why do i need those both files ??? .... i did not find any info why are 2 files ... can you please tell me ?
Thank you again
Click to expand...
Click to collapse
Maybe they're just two different versions. They look to be from the file size. I would just pick the second one. But you're best asking that question in the thread above because I don't have a HD7 and I'm just guessing
mate thank you very much ,i installed successfully the 7004 ,but i cant still get it to work ,it just says that cant comuicate with the phone ,and i do every step as described ... should i try the other ROM ?
Thank again for helping me i hope we can fix this
zhelev81 said:
mate thank you very much ,i installed successfully the 7004 ,but i cant still get it to work ,it just says that cant comuicate with the phone ,and i do every step as described ... should i try the other ROM ?
Thank again for helping me i hope we can fix this
Click to expand...
Click to collapse
Can't communicate with phone usually indicates a connection/driver error. Make sure you only connect your USB when in bootloader mode. You may need to disable driver signature enforcement if you use Windows 7:
http://www.thegeekprofessor.com/tip...-off-driver-signing-enforcement-in-windows-7/
Failing that, try a different USB port & make sure the device shows up in device manager. Also, make sure your device is recognised by Zune.
You could try the other ROM too, but it most likely would show the same error.
thank you i have unlocked it now
uploaded many apps and i am very happy .....
Good luck to everyone