Database Info

cid unlcok for chipset 4?

I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001

http://blog.neten.de/read.php?66
???????????????????????????????

A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!

yes please if this is a way to cid unlock a G4, can someone please translate?

not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.

Kensu, thanks for your time!

If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!

abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?

inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.

abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!

Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino

Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )

Thanks
Great !
It works... Thank you so much
Merlino

Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks

Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?

You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24

No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!

I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)

Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???

I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.

T-mobile MDA downgrade Ipl/Spl & WM6 Upgrade Issue

I followed Dr. Puttingham's thread and Yippie's thread to a tee in addition to reading threads in this forum for a good number of hours each day for two weeks. Yesterday, I became brave enough to downgrade my 2.26 Ipl / 2.26 spl; GSM 2.25.11; OS 2.26.10.2 MDA with a goal to upgrade to a custom WM6 rom with touchflo.
* Started with flashing the button rom then cid unlock with lockwiz2b which looked successful no errors but got a 1.xx IPL / 2.26 SPL since I got a 2.26 SPL then
* flashed the wizard love rom then then cid unlock with lockwiz2b which looked successful also but got the same results - a1.xx IPL / 2.26 SPL again then
* flashed the 2.26 T-mobile rom from the Tmobile website then
* flashed NBD 8.3 only to go back to Tmobile's 2.26 rom - DISAPPOINTED after two hours...............
Any assistance would be appreciated without bricking my MDA. Also, I read the thread on how to install a 2.x rom in a cid locked G3, this method appears a little bid complicated and if I need to move forward with this method, would this method work for any WM6 rom with touchflo and if somebody could simplify the method in layman's terms for newbie's like me could understand, please advice.
Let me know if I missed anything in the process.
Thanks, Technobuff

After u do cid unluck and sim unluck and its reboots do a downgrade again to the button rom and ur ipl and spl will change.(u do not have to re-due the onlucking procedure again)

I tried again performing Dr. Puttingham's CID unlocking process in terms of flashing the button rom then the CID unlock process using Lokowiz2b but while I am at the DOS screen trying to CID unlock my MDA it the DOS screen showed unlocking phone........DO NOT DISCONNECT UNTIL THE PHONE REBBOTS.
This process went on for 5 then 10 then past 30 minutes until I gave up. To be on the safe side I turned off the LAPTOP by taking the battery then pulled the USB cable from the PC to the MDA.
What is the typical timeframe for the unit to CID unlock? Why is is it hanging? Am I missing or skipping the process? How can I complete the process?
Any help would ber greatly appreciated by newbies who read threads.
Technobuff

The problem is that you need to have an IPL/SPL of 1.xx before you try to unlock your phone. CID unlocking will not change your SPL which means that you had an IPL of 1.xx and an SPL of 2.26 before you even tried to unlock. You need to reflash the button ROM over and over until your IPL and SPL both show 1.xx and then run lokiwiz.

dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm

unlock problem
if your device doesn't reboot almost at once after the unlock, it probably didn't work. That is what happened to me. Did you get four lines of File cannot be opened or a similar message? I got that from following the 17 steps carefully. What was wrong for me was unzipping to the root directory of C:/. When I redid it to the desktop and executed from there, no problemo.
Your symptoms sound exactly like mine. I posted a longer thread, somewhere....
LH

Ok i did a little booboo and yesterday was using equinoxe's softspl tool by mistake (didn't notice i had a g3), this causes you to actually end up with the exact same os you had before you flashed.
The best advice I can give: Open the Dr's guide and follow every step closely. (also just found this guide. Its a bit simpler http://forum.xda-developers.com/showthread.php?t=305225)
Once you CID unlock you should be able to use the RUUs to flash.
Make sure everytime you do any of the steps that dr. putt gives to be comepletely synced to activesync.
Also dont forget to load enablerapi.cab on your wizard.
Also you must use the unlock function before the cid unlock function in lokiwiz.
OH also the unlock will work after your ipl drops to 1.xx After you do the unlocks reflash button to drop the spl to 1.xx Then just flash up to a higher IPL/SPL as the Dr states.
If it seems unorganized im sorry =P
4irm said:
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
Click to expand...
Click to collapse
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong

slod said:
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
Click to expand...
Click to collapse
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.

thanks. helps me to learn stuff.

CID???
how wil i know if my fone mda vario is CID unlocked?
it is now installed with t-mobile 2.26 ROM
thanks.
rizortiz

famewolf said:
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
Click to expand...
Click to collapse
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm

4irm said:
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
Click to expand...
Click to collapse
Perhaps they want it actually cid unlocked for resale value...or perhaps they prefer the RUU method of installs vs having to use shelltool.

HardSPL every time I flash a new ROM or just once?

Hello,
I've used JumpSPL1.56-KAIS followed by flash-hardSPL to CID unlock my Tilt 8900 (I get the white screen with HardSPL).
My understanding is that I no longer need to CID unlock my device using the above procedure for future ROM's and Radios.
Is that correct?

afgoody said:
Hello,
I've used JumpSPL1.56-KAIS followed by flash-hardSPL to CID unlock my Tilt 8900 (I get the white screen with HardSPL).
My understanding is that I no longer need to CID unlock my device using the above procedure for future ROM's and Radios.
Is that correct?
Click to expand...
Click to collapse
if the hardspl flash was successful, then no, you should never have to flash it again to change roms. However, it seems as though your hardspl was not successful if you got the white screen. Go here to make sure.
http://forum.xda-developers.com/showthread.php?t=354061

I've read/used that thread because I was getting the white screen with HardSPL, but it sounds like you're telling me that if I can't get past the white screen when flashing HardSPL, then I have to use JumpSPL1.56-KAIS followed by flash-hardSPL every time I flash a new ROM or radio. Does that sound right?
Here's what my bootloader display shows currently:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Thanks

afgoody said:
I've read/used that thread because I was getting the white screen with HardSPL, but it sounds like you're telling me that if I can't get past the white screen when flashing HardSPL, then I have to use JumpSPL1.56-KAIS followed by flash-hardSPL every time I flash a new ROM or radio. Does that sound right?
Here's what my bootloader display shows currently:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Thanks
Click to expand...
Click to collapse
if that is what your bootloader shows, you should be good to go.

Is that because it says SPL? (regardless of what come after that).

afgoody said:
Is that because it says SPL? (regardless of what come after that).
Click to expand...
Click to collapse
the 1.0olipof is what i was looking for

Great, thanks! I won't run JumpSPL any more!

clever one
This a Very good question afgoody

Just remember that if you have to flash the original boot loader back that you'll need to use the same jumpSPL program again, not the program referenced in the thread about reverting back.

How to tell if HardSPL is already installed
I just purchased and unlocked a tilt and am now using it on Tmobile. I'm now realizing I need to flash my ROM to avoid spening more hours tweaking with work-arounds. I've gathered enough information on the process, but just want to find out if there's a way to find out if the HardSPL has already been installed by the previous owner. If not, then I will just reload. Just thought I might save a step. Cheers!

Power off your Tilt. Press and hold the camera button while you turn it back on. You will see a tri-color screen with some text. Look for SPL-1.0.OliPof.
If you see that line your Tilt has been unlocked. Anything else it isn't. Soft reset to exit the boot loader.

Please help me RElock CID my Kaiser. I need to return this phone to Warrenty

Phone info in sig
Used KaiserUnlocker (NOT kaiser-supercid - OP claims it doesnt work with hardspl 3.28 nor 3.29).
I can only find a relocker for the superCID unlocker
Can anyone help me relock my CID since I used KaiserUnlocker?

Have you called cust care yet? If not, call and ask for your unlock code because you plan on taking an extended buisness trip to canadialand. Say your company is using Rogers up there and is providing you a phone, but you cannot imagine your life without your tilt.
Then warranty it.

not sure if u looked at the "reverting" thread for this request here
http://forum.xda-developers.com/showthread.php?t=335568

phantomy2g said:
not sure if u looked at the "reverting" thread for this request here
http://forum.xda-developers.com/showthread.php?t=335568
Click to expand...
Click to collapse
I don't see anything in that thread about reverting CID back to OEM..unless I missed it.

cbass said:
Have you called cust care yet? If not, call and ask for your unlock code because you plan on taking an extended buisness trip to canadialand. Say your company is using Rogers up there and is providing you a phone, but you cannot imagine your life without your tilt.
Then warranty it.
Click to expand...
Click to collapse
i need not to unlock my phone. it is already unlocked. i need to lock it so i can return it.
but lets say i call cust care, can they give me my OEM CID code to relock? All i can remember is mine starting with 8 lol

richabi said:
i need not to unlock my phone. it is already unlocked. i need to lock it so i can return it.
but lets say i call cust care, can they give me my OEM CID code to relock? All i can remember is mine starting with 8 lol
Click to expand...
Click to collapse
It shouldn't make any difference. ATT is not like Sprint in this matter I believe. They don't care. Just put the original stock ROM on ATT with the Original Radio and it should be ok. Make sure the software is exactly as it is when its NIB (new in box). No customs ROMs or the Super eMo radio.
Thats what I did when I returned mine and nothing happened.
Although I might have been lucky. But in my opinion nothing should happen.
Att is just anal about giving the unlock code.
They don't care if you return in unlocked.
Once again this is my opinion.. Do it at your own risk.

I was saying that you should get the unlock code from them and return the phone unlocked. That way they can't question your phone being unlocked.

I hope this helps
richabi said:
i need not to unlock my phone. it is already unlocked. i need to lock it so i can return it.
but lets say i call cust care, can they give me my OEM CID code to relock? All i can remember is mine starting with 8 lol
Click to expand...
Click to collapse
I used the relocker just yesterday. I don't think it matters what you used to unlock it. Just flash a compatable SPL before starting. I too was using SPL 3.29 comex. The instructions were a little tedious.
First: follow the steps to lock only replace file Super CID with relocker.exe in step two. {you must do this before you remove Hard SPL by Olipro, because you have to have hard spl to start the unlocker} This relock your phone. Left to do is remove Hard SPL and flash the correct ROM
Second: flash your OEM SPL because you haven't removed hard SPL you shouldn't need jump spl
Third: Flash your OEM ROM
This should have your good to go. I did deviate from the recommended sequence in that I fould that when I followed the steps in the thread I'd already removed hard spl and it was needed to get relock/unlock to work. PM if you need assistance I will provide you with my IM user name. and we can have a live chat to get you through it.
Fourth: Re

wow
you guys are amazing. thank you all for your replies.
I called them for the unlock code and CID number and the lady said don't worry about it. just to return the phone unlocked and she will make a note on my account.
of course, my account doesnt claim that i called in before that and was issued an unlock code so i dont know how that is going to work. the lady sounded a bit perplexed about my request so i don't know if i should trust her lol
I don't think its a big deal if a phone is unlocked. i wouldn't think it would void warranty. some ppl NEED to travel internationally and they have issues with their AT&T branded phones every day, ya know?

Well let me set the record straight. It's not a big deal. I've RMA returned two Tilts now back to AT&T, the first one I still had an HTC based cooked ROM on it from here (Dutty's Dualtouch v4) and the second had Garmin 4.2, but I reinstalld the AT&T Tilt ROM. But I didn't relock it. Anyways they can't tell, they rewipe it from scratch so the evidence of if it's locked or unlocked goes bye bye. They'd have to try to flash a nonstandard ROM to know for sure. They aren't going to do that obviously

Hello everybody, excuse my poor english, i am french.
I just have installed a cooked rom i will try it for a few days but it's possible that i will want to return back to the original orange Rom. I have the 3.29 hard spl and superCID unlocked (000000000).
Can i just execute the installation of the original rom ? or have i to do something before ? (i have killed a C500 by doing this kind of operation)
Thx for your help and have a nice day.

McAlister said:
Hello everybody, excuse my poor english, i am french.
I just have installed a cooked rom i will try it for a few days but it's possible that i will want to return back to the original orange Rom. I have the 3.29 hard spl and superCID unlocked (000000000).
Can i just execute the installation of the original rom ? or have i to do something before ? (i have killed a C500 by doing this kind of operation)
Thx for your help and have a nice day.
Click to expand...
Click to collapse
I've answered to your PM...

Yeah. I returned a Tilt with HardSPL installed and got a refurb back. The coolest part was that the refurb had a 1gb card in it with a bunch of rom flashing stuff on it. I was laughing.
It didn't have HardSPL installed, though. Wonder if someone bricked it.

CID unlock 3.56?

Hey guys! been lurking around the forums for eons, but haven't 'dove in' till just recently. Have a couple of questions.
Some months ago I did the free upgrade to WinMO 6.1.
I got Tilt SID unlocked by calling up AT&T and telling them I was going to Europe. My T-mobile SIM card is working just fine.
After a few hours of cussing, I managed to beat HardSPL 3.56 into my phone, because it already had SPL 3.56 on it.
Now I'm stuck trying to CID unlock and I can't seem to find a utility to work with it. The 'chain' of threads I followed dead ended saying downgrade to get it work, but I don't want to do that. I had a hard enough time getting HardSPL 3.56 to install. Then I ran across Jockyw's CID unlocker http://forum.xda-developers.com/showthread.php?p=1837147 and found myself saying ooo and ahh! But, it won't work with ANY 3.xx HardSPL.
Is there a CID unlocker compatible with 3.56??
I'd love to have AT command mode stuff and etc. from jockyw's, but at this point I think I'll take whatever I can get without needing to downgrade.
I can't seem to find it now, but didn't there used to be a list of pre-cooked ROMs here somewhere?
I think what I'm aiming at is a fully patched / hacked 6.1 HTC ROM with everything fixed and no bugs. Preferably minus any bloatware. If it has recommended utilities pre-installed great, if not, no big loss. Did they ever finish hacking a video driver together? I lost track of that thread, and can't seem to find any current info.
I've been waiting for a working Linux distro for a HTC device for years, but I'm going to throw in the towel and make the best of what I can get on windows. I've spent over $3000 on these HTC devices over the years, but don't rely on them because of all the bugs. Once I get my Tilt patched up, I'm jumping ship and trading in my old ones for a G1.
Thanks for any help!
p.s. I DO have to CID unlock before I can install any other ROMs.. right??
p.p.s. Here's all the details if it's any help:
rom version 3.57.502.2 WWE
rom date 7/17/08
radio version: 1.65.21.18
protocol version: 25.88.40.05H
tri-color screen
KAIS1*0
SPL-3.56.0000
CPLD-8
.
.
Serial
image version 3.57.502.2
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Note: This is BEFORE I updated to HardSPL 3.56
Thanks again!

If you have any of the HARD SPL installed(3.56 from your words).
You can flash any ROM you want.
No need to CID unlock separately.
With Hard SPL, your Device is CID unlocked already.

Your pda doesn't not have hard spl installed on it
Crogon said:
Hey guys! been lurking around the forums for eons, but haven't 'dove in' till just recently. Have a couple of questions.
Some months ago I did the free upgrade to WinMO 6.1.
I got Tilt SID unlocked by calling up AT&T and telling them I was going to Europe. My T-mobile SIM card is working just fine.
After a few hours of cussing, I managed to beat HardSPL 3.56 into my phone, because it already had SPL 3.56 on it.
Now I'm stuck trying to CID unlock and I can't seem to find a utility to work with it. The 'chain' of threads I followed dead ended saying downgrade to get it work, but I don't want to do that. I had a hard enough time getting HardSPL 3.56 to install. Then I ran across Jockyw's CID unlocker http://forum.xda-developers.com/showthread.php?p=1837147 and found myself saying ooo and ahh! But, it won't work with ANY 3.xx HardSPL.
Is there a CID unlocker compatible with 3.56??
I'd love to have AT command mode stuff and etc. from jockyw's, but at this point I think I'll take whatever I can get without needing to downgrade.
I can't seem to find it now, but didn't there used to be a list of pre-cooked ROMs here somewhere?
I think what I'm aiming at is a fully patched / hacked 6.1 HTC ROM with everything fixed and no bugs. Preferably minus any bloatware. If it has recommended utilities pre-installed great, if not, no big loss. Did they ever finish hacking a video driver together? I lost track of that thread, and can't seem to find any current info.
I've been waiting for a working Linux distro for a HTC device for years, but I'm going to throw in the towel and make the best of what I can get on windows. I've spent over $3000 on these HTC devices over the years, but don't rely on them because of all the bugs. Once I get my Tilt patched up, I'm jumping ship and trading in my old ones for a G1.
Thanks for any help!
p.s. I DO have to CID unlock before I can install any other ROMs.. right??
p.p.s. Here's all the details if it's any help:
rom version 3.57.502.2 WWE
rom date 7/17/08
radio version: 1.65.21.18
protocol version: 25.88.40.05H
tri-color screen
KAIS1*0
SPL-3.56.0000
CPLD-8
.
.
Serial
image version 3.57.502.2
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Note: This is BEFORE I updated to HardSPL 3.56
Thanks again!
Click to expand...
Click to collapse
I'm sorry to tell you that this:
KAIS1*0
SPL-3.56.0000
CPLD-8
Is not hard spl and if you pda has hard spl installed is will say this:
KAIS1*0
SPL-3.56.Hard
CPLD-8
I received my replacement Tilt 4 days ago from At&t and it came with WM6.1 and spl 3.56.0000 and you are right I cant find anything to change that spl. I have tried to CID UNlock and I get the white screen, so I tried jump spl 1.56 and 1.93 and neither one of them worked. So now I'm stuck with this 3.56.0000, I sent Jocky a PM and He told me that he was looking in to it and that he will get back to me. So I have to wait. Or maybe someone will read this that has a fix for this issue and help us.

I just bought my Tilt too, it also came with 3.56 and WM6.1 but I had NO problems unlocking and flashing hard SPL to it.
Now, what happens when you run Jump 1.93? and are you running it directly from your main memory NOT from a SD card, and no SD card is in the phone?
If you follow the directions EXACTLY it will work.
1 Run Jump SPL from your main memory
2 tri color boot screen saying jump 1.93 should show up, with USB at the bottom
3 Unplug your device wait 30 sec and plug it back in
4 In Active sync on your PC disable USB connections (I've actually flashed spl's without doing this)
5 Now run the customRUU with the hard spl file you want to upload.

BerettaFreak said:
I just bought my Tilt too, it also came with 3.56 and WM6.1 but I had NO problems unlocking and flashing hard SPL to it.
Now, what happens when you run Jump 1.93? and are you running it directly from your main memory NOT from a SD card, and no SD card is in the phone?
If you follow the directions EXACTLY it will work.
1 Run Jump SPL from your main memory
2 tri color boot screen saying jump 1.93 should show up, with USB at the bottom
3 Unplug your device wait 30 sec and plug it back in
4 In Active sync on your PC disable USB connections (I've actually flashed spl's without doing this)
5 Now run the customRUU with the hard spl file you want to upload.
Click to expand...
Click to collapse
Yes I did all that I'm very familar with the process this is my 5th tilt 2 of them the CID Unlock run just fine and the other 2 I that to run jump 1.56 to get pass the white screen. But for some reason I cant get anything to work on this tilt. I even try to install the OG WM6.0 to try to downgrade the spl but that did work either. Do you have any other suggestions?

IIRC for me to run the CID unlocker program I needed to flash the SPL first.
What is happening when you are trying to run the Jump SPL files? It's just not making sense.
You need to flash Hard SPL 3.29 BEFORE you try to run the unlocker, you can't do 3.56 then try to unlock it. Once its unlocked then flash it with hard 3.56 if you so desire.

Also after doing the 3.29 spl you need the proper cracked radio flashed to allow you to unlock the device, are you skipping that step?
It sounds like your trying to do an SPL upgrade and NOT SIM unlock the device since that step comes after.

BerettaFreak said:
Also after doing the 3.29 spl you need the proper cracked radio flashed to allow you to unlock the device, are you skipping that step?
It sounds like your trying to do an SPL upgrade and NOT SIM unlock the device since that step comes after.
Click to expand...
Click to collapse
No what I'm trying to do is CID Unlock my phone but is not working I get the white screen. I have tried everything I know to get pass it. I'm not trying to install hard spl 3.29 or 3.56. I have to CID Unlock my phone first right? That is what I've always done before. I'm out of ideas.

What is on your phone right now?
Factory SPL?
Factory 6.1 rom?
If so you need to run Oli's Sim Unlocker and CID Unlocker exe, this will FIRST flash a 3.29 hard SPL to your phone, THEN then next step is to flash a cracked radio and then you can sim and CID unlock your phone. As noted before tho a CID unlock is NOT necessary, if your Sim unlocked and Hard SPL'd you can do whatever you want to the phone.

BerettaFreak said:
What is on your phone right now?
Factory SPL?
Factory 6.1 rom?
If so you need to run Oli's Sim Unlocker and CID Unlocker exe, this will FIRST flash a 3.29 hard SPL to your phone, THEN then next step is to flash a cracked radio and then you can sim and CID unlock your phone. As noted before tho a CID unlock is NOT necessary, if your Sim unlocked and Hard SPL'd you can do whatever you want to the phone.
Click to expand...
Click to collapse
Thank you very much for all your help BerettaFreak you are the man!

Heeey! Did my thread get hijacked?
Lol, Ok where to start..
skr_xd:
If you DON'T need to CID unlock, then the Newb instructions are a bit confusing. Why does it say to install HardSPL, then CID unlock?
What or why would I need to CID unlock separately? ..or is it the Security unlock bit, Or SuperCID that I'm still missing? There must be some point to it, Because Oli's Does HardSPL then SIM unlock, THEN CID unlock.
Vol22002:
I DID get HardSPL 3.56 installed. I used JumpSPL 1.56. DO remember to yank out the SD and SIM card. Note the very bottom of my post says those stats listed are BEFORE I installed HardSPL.
I still need some more help with finding a ROM, but I suppose that would be best addressed in a new thread, so I'll do that.
Thanks again!

Crogon said:
Lol, Ok where to start..
skr_xd:
If you DON'T need to CID unlock, then the Newb instructions are a bit confusing. Why does it say to install HardSPL, then CID unlock?
Click to expand...
Click to collapse
CID Unlocking is done by installing the Hard SPL, the Hard SPL's don't check the Carrier ID (CID) when flashing new ROM's.
Crogon said:
What or why would I need to CID unlock separately? ..or is it the Security unlock bit, Or SuperCID that I'm still missing? There must be some point to it, Because Oli's Does HardSPL then SIM unlock, THEN CID unlock.
Click to expand...
Click to collapse
SuperCID Set's your CID to 11111111, Security unlock removes an extra check when Flashing Radios to avoid you getting stuck on some radios.
Crogon said:
Vol22002:
I DID get HardSPL 3.56 installed. I used JumpSPL 1.56. DO remember to yank out the SD and SIM card. Note the very bottom of my post says those stats listed are BEFORE I installed HardSPL.
I still need some more help with finding a ROM, but I suppose that would be best addressed in a new thread, so I'll do that.
Thanks again!
Click to expand...
Click to collapse
Just follow all the steps in the Guide by mskip and post and problems you have there. Understanding is not a pre-requisite, with that guide, you can figure out what all the steps do later...
Simply put:
HardSPL / CID Unlock / Super CID - Allows ROM's and Radio's to be flashed.
SIM Unlock - Allows you to use a foriegn SIM card
Security Unlock - Avoids problems when flashing some Radios.
Ta
Dave

DaveShaw said:
SuperCID Set's your CID to 11111111, Security unlock removes an extra check when Flashing Radios to avoid you getting stuck on some radios.
Security Unlock - Avoids problems when flashing some Radios.
Click to expand...
Click to collapse
Hey, thanks for the fast reply Dave!
Ok, So I COULD still Security unlock it, If I could find a security unlocker that worked with 3.56.
The bit about problems flashing radios sounds a bit like something that happens right before your phone becomes a brick. Could you point me to a resource about problem radios or how to avoid them?
I actually prefer to leave the radio alone, if I can get away with it. I just want a patched up ROM, as I mentioned earlier and in my new thread.
Anyway, If I end up needing to replace my radio, how do I avoid 'problem ones'. I understand that some radios simply don't work with some ROMs, but you seem to be eluding to something different here.
Thanks again!!

Crogon said:
Hey, thanks for the fast reply Dave!
Ok, So I COULD still Security unlock it, If I could find a security unlocker that worked with 3.56.
The bit about problems flashing radios sounds a bit like something that happens right before your phone becomes a brick. Could you point me to a resource about problem radios or how to avoid them?
I actually prefer to leave the radio alone, if I can get away with it. I just want a patched up ROM, as I mentioned earlier and in my new thread.
Anyway, If I end up needing to replace my radio, how do I avoid 'problem ones'. I understand that some radios simply don't work with some ROMs, but you seem to be eluding to something different here.
Thanks again!!
Click to expand...
Click to collapse
To Security Unlock, just follow this guide: http://forum.xda-developers.com/showthread.php?t=361236
Then upgrade to HardSPL 3.56 again.
Security Unlocking is done by setting a flag in the NAND. It's permanent (unless you re-lock) and there are no comptability problems once it is set (you need to use a special Hard SPL to set it first though).
EDIT:
There is no list of known bad radio's - only the "Radio from Hell" 1.65.17.10 - but another Radio from hell could appear any day
Ta
Dave

Thanks for clearing that up Dave.
I think I'm going to opt to ignore the security unlock, since it sounds like it's on an 'as needed' basis.
I have 'batter fish to fry' at the moment. I'm grinding gears trying to figure out HOW to figure out which ROMs I should be looking into, in my other thread.
By the by guys, I was joking about the 'hijacked thread' thing, I'm sure somebody will find the info useful.

Just when i though I had this all figured out and was about to Flash my first ROM.
I have read and re-read the flashing wikis and am still confused.
If your on WM6 then you need to use Jockyw2001's Kaiser SuperCID and Security Unlocker v0.1 right? But if you are on WM6.1 then you use Olipro's Kaiser SIM/CID Unlocker & Changer right?
Well I am currently on WM6 pro and dont want to upgrade to 6.1 just to use Olipro's program. So I would go with Jocky's right. Then people say you need to flash a HardSPL first before doing the SuperCID and Security Unlocker. But then in Jocky's directions it says Note that the security unlocker does not work with "SPL-3.28.Hard" and "SPL-3.29.Hard".
So what SPL do you start with.
And I know Dave already told me this earlier that since I have an AT&T Tilt and I am with AT&T service then I dont have to worry about SIM unlocking obviously. So can I skip the whole CID/SUPER CID/SECURITY UNLOCK routine. Can I just Flash HardSPL 3.29 or 3.56 and then start playing with ROMS till my hearts content or is all the security stuff really that neccessary?
So I am lost once again. Wow. I dont know why I am not getting this.
P.S. On another note, I am using AT&T Tilt with shipped ROM running WM6 pro. I have about 40-50 programs installed on it. When first setting up my phone I did the soft reset which supposedly gets rid of the bloatware. Anyways, with all my programs and it being the stock ROM I still have 62MB free PROGRAM RAM. I do however only have like 30MB Storage RAM. But 62MB of free PROGRAM RAM. I see people with naked ROMS that only get like 55MB of free PROGRAM RAM, is my phone like magic or something? Just curious as to how this may be possible.

asofiker said:
Just when i though I had this all figured out.
I have read and re-read the flashing wikis and am still confused.
If your on WM6 then you need to use Jockyw2001's Kaiser SuperCID and Security Unlocker v0.1 right? But if you are on WM6.1 then you use Olipro's Kaiser SIM/CID Unlocker & Changer right?
Well I am currently on WM6 pro and dont want to upgrade to 6.1 just to use Olipro's program. So I would go with Jocky's right. Then people say you need to flash a HardSPL first before doing the SuperCID and Security Unlocker. But then in Jocky's directions it says Note that the security unlocker does not work with "SPL-3.28.Hard" and "SPL-3.29.Hard".
So what SPL do you start with.
And I know Dave already told me this earlier that since I have an AT&T Tilt and I am with AT&T service then I dont have to worry about SIM unlocking obviously. So can I skip the whole CID/SUPER CID/SECURITY UNLOCK routine. Can I just Flash HardSPL 3.29 or 3.56 and then start playing with ROMS till my hearts content or is all the security stuff really that neccessary?
So I am lost once again. Wow. I dont know why I am not getting this.
Click to expand...
Click to collapse
There is a Hard SPL 1 by pof. Flash that first then follow Jocky's instructions.
Also the OliPro Security unlock isn't permenant, next time you flash a Radio it's gone.
Ta
Dave

Ok so Flash the Hard SPL 1 by pof
Then follow Jockys directions in using his Kaiser SuperCID and Security Unlocker v0.1
Then Flash either HardSPL 3.29 or 3.56. WHichever I choose?
Then go crazy with playing with different ROMS.
P.S. So every time you Flash a HardSPL it overwrites the previous one? Or do you have to get rid of a HardSPL first before putting a new one on?

asofiker said:
Ok so Flash the Hard SPL 1 by pof
Then follow Jockys directions in using his Kaiser SuperCID and Security Unlocker v0.1
Then Flash either HardSPL 3.29 or 3.56. WHichever I choose?
Then go crazy with playing with different ROMS.
P.S. So every time you Flash a HardSPL it overwrites the previous one? Or do you have to get rid of a HardSPL first before putting a new one on?
Click to expand...
Click to collapse
Flashing a new SPL overrides the old one.
You said before you were happy with WM6.0, if so use either the pof Hard SPL v1 or the jockyw Hard SPL v1.1 (Part of the security unlock); if you are using WM6.1, use one of the jockyw or cmonex Hard SPL 3.**. Using the wrong version won't break your phone, but Windows will randomly freeze.
Ta
Dave

Thanks again Dave for helpin me out and not tearing me a new one. But just one last question.
If I find a new ROM that I want to Flash and it uses WM6.1 then I have to make sure that I flash a HardSPL 3.xx before flashing that new ROM, is that what ur saying?