Hey guys! been lurking around the forums for eons, but haven't 'dove in' till just recently. Have a couple of questions.
Some months ago I did the free upgrade to WinMO 6.1.
I got Tilt SID unlocked by calling up AT&T and telling them I was going to Europe. My T-mobile SIM card is working just fine.
After a few hours of cussing, I managed to beat HardSPL 3.56 into my phone, because it already had SPL 3.56 on it.
Now I'm stuck trying to CID unlock and I can't seem to find a utility to work with it. The 'chain' of threads I followed dead ended saying downgrade to get it work, but I don't want to do that. I had a hard enough time getting HardSPL 3.56 to install. Then I ran across Jockyw's CID unlocker http://forum.xda-developers.com/showthread.php?p=1837147 and found myself saying ooo and ahh! But, it won't work with ANY 3.xx HardSPL.
Is there a CID unlocker compatible with 3.56??
I'd love to have AT command mode stuff and etc. from jockyw's, but at this point I think I'll take whatever I can get without needing to downgrade.
I can't seem to find it now, but didn't there used to be a list of pre-cooked ROMs here somewhere?
I think what I'm aiming at is a fully patched / hacked 6.1 HTC ROM with everything fixed and no bugs. Preferably minus any bloatware. If it has recommended utilities pre-installed great, if not, no big loss. Did they ever finish hacking a video driver together? I lost track of that thread, and can't seem to find any current info.
I've been waiting for a working Linux distro for a HTC device for years, but I'm going to throw in the towel and make the best of what I can get on windows. I've spent over $3000 on these HTC devices over the years, but don't rely on them because of all the bugs. Once I get my Tilt patched up, I'm jumping ship and trading in my old ones for a G1.
Thanks for any help!
p.s. I DO have to CID unlock before I can install any other ROMs.. right??
p.p.s. Here's all the details if it's any help:
rom version 3.57.502.2 WWE
rom date 7/17/08
radio version: 1.65.21.18
protocol version: 25.88.40.05H
tri-color screen
KAIS1*0
SPL-3.56.0000
CPLD-8
.
.
Serial
image version 3.57.502.2
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Note: This is BEFORE I updated to HardSPL 3.56
Thanks again!
If you have any of the HARD SPL installed(3.56 from your words).
You can flash any ROM you want.
No need to CID unlock separately.
With Hard SPL, your Device is CID unlocked already.
Your pda doesn't not have hard spl installed on it
Crogon said:
Hey guys! been lurking around the forums for eons, but haven't 'dove in' till just recently. Have a couple of questions.
Some months ago I did the free upgrade to WinMO 6.1.
I got Tilt SID unlocked by calling up AT&T and telling them I was going to Europe. My T-mobile SIM card is working just fine.
After a few hours of cussing, I managed to beat HardSPL 3.56 into my phone, because it already had SPL 3.56 on it.
Now I'm stuck trying to CID unlock and I can't seem to find a utility to work with it. The 'chain' of threads I followed dead ended saying downgrade to get it work, but I don't want to do that. I had a hard enough time getting HardSPL 3.56 to install. Then I ran across Jockyw's CID unlocker http://forum.xda-developers.com/showthread.php?p=1837147 and found myself saying ooo and ahh! But, it won't work with ANY 3.xx HardSPL.
Is there a CID unlocker compatible with 3.56??
I'd love to have AT command mode stuff and etc. from jockyw's, but at this point I think I'll take whatever I can get without needing to downgrade.
I can't seem to find it now, but didn't there used to be a list of pre-cooked ROMs here somewhere?
I think what I'm aiming at is a fully patched / hacked 6.1 HTC ROM with everything fixed and no bugs. Preferably minus any bloatware. If it has recommended utilities pre-installed great, if not, no big loss. Did they ever finish hacking a video driver together? I lost track of that thread, and can't seem to find any current info.
I've been waiting for a working Linux distro for a HTC device for years, but I'm going to throw in the towel and make the best of what I can get on windows. I've spent over $3000 on these HTC devices over the years, but don't rely on them because of all the bugs. Once I get my Tilt patched up, I'm jumping ship and trading in my old ones for a G1.
Thanks for any help!
p.s. I DO have to CID unlock before I can install any other ROMs.. right??
p.p.s. Here's all the details if it's any help:
rom version 3.57.502.2 WWE
rom date 7/17/08
radio version: 1.65.21.18
protocol version: 25.88.40.05H
tri-color screen
KAIS1*0
SPL-3.56.0000
CPLD-8
.
.
Serial
image version 3.57.502.2
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Note: This is BEFORE I updated to HardSPL 3.56
Thanks again!
Click to expand...
Click to collapse
I'm sorry to tell you that this:
KAIS1*0
SPL-3.56.0000
CPLD-8
Is not hard spl and if you pda has hard spl installed is will say this:
KAIS1*0
SPL-3.56.Hard
CPLD-8
I received my replacement Tilt 4 days ago from At&t and it came with WM6.1 and spl 3.56.0000 and you are right I cant find anything to change that spl. I have tried to CID UNlock and I get the white screen, so I tried jump spl 1.56 and 1.93 and neither one of them worked. So now I'm stuck with this 3.56.0000, I sent Jocky a PM and He told me that he was looking in to it and that he will get back to me. So I have to wait. Or maybe someone will read this that has a fix for this issue and help us.
I just bought my Tilt too, it also came with 3.56 and WM6.1 but I had NO problems unlocking and flashing hard SPL to it.
Now, what happens when you run Jump 1.93? and are you running it directly from your main memory NOT from a SD card, and no SD card is in the phone?
If you follow the directions EXACTLY it will work.
1 Run Jump SPL from your main memory
2 tri color boot screen saying jump 1.93 should show up, with USB at the bottom
3 Unplug your device wait 30 sec and plug it back in
4 In Active sync on your PC disable USB connections (I've actually flashed spl's without doing this)
5 Now run the customRUU with the hard spl file you want to upload.
BerettaFreak said:
I just bought my Tilt too, it also came with 3.56 and WM6.1 but I had NO problems unlocking and flashing hard SPL to it.
Now, what happens when you run Jump 1.93? and are you running it directly from your main memory NOT from a SD card, and no SD card is in the phone?
If you follow the directions EXACTLY it will work.
1 Run Jump SPL from your main memory
2 tri color boot screen saying jump 1.93 should show up, with USB at the bottom
3 Unplug your device wait 30 sec and plug it back in
4 In Active sync on your PC disable USB connections (I've actually flashed spl's without doing this)
5 Now run the customRUU with the hard spl file you want to upload.
Click to expand...
Click to collapse
Yes I did all that I'm very familar with the process this is my 5th tilt 2 of them the CID Unlock run just fine and the other 2 I that to run jump 1.56 to get pass the white screen. But for some reason I cant get anything to work on this tilt. I even try to install the OG WM6.0 to try to downgrade the spl but that did work either. Do you have any other suggestions?
IIRC for me to run the CID unlocker program I needed to flash the SPL first.
What is happening when you are trying to run the Jump SPL files? It's just not making sense.
You need to flash Hard SPL 3.29 BEFORE you try to run the unlocker, you can't do 3.56 then try to unlock it. Once its unlocked then flash it with hard 3.56 if you so desire.
Also after doing the 3.29 spl you need the proper cracked radio flashed to allow you to unlock the device, are you skipping that step?
It sounds like your trying to do an SPL upgrade and NOT SIM unlock the device since that step comes after.
BerettaFreak said:
Also after doing the 3.29 spl you need the proper cracked radio flashed to allow you to unlock the device, are you skipping that step?
It sounds like your trying to do an SPL upgrade and NOT SIM unlock the device since that step comes after.
Click to expand...
Click to collapse
No what I'm trying to do is CID Unlock my phone but is not working I get the white screen. I have tried everything I know to get pass it. I'm not trying to install hard spl 3.29 or 3.56. I have to CID Unlock my phone first right? That is what I've always done before. I'm out of ideas.
What is on your phone right now?
Factory SPL?
Factory 6.1 rom?
If so you need to run Oli's Sim Unlocker and CID Unlocker exe, this will FIRST flash a 3.29 hard SPL to your phone, THEN then next step is to flash a cracked radio and then you can sim and CID unlock your phone. As noted before tho a CID unlock is NOT necessary, if your Sim unlocked and Hard SPL'd you can do whatever you want to the phone.
BerettaFreak said:
What is on your phone right now?
Factory SPL?
Factory 6.1 rom?
If so you need to run Oli's Sim Unlocker and CID Unlocker exe, this will FIRST flash a 3.29 hard SPL to your phone, THEN then next step is to flash a cracked radio and then you can sim and CID unlock your phone. As noted before tho a CID unlock is NOT necessary, if your Sim unlocked and Hard SPL'd you can do whatever you want to the phone.
Click to expand...
Click to collapse
Thank you very much for all your help BerettaFreak you are the man!
Heeey! Did my thread get hijacked?
Lol, Ok where to start..
skr_xd:
If you DON'T need to CID unlock, then the Newb instructions are a bit confusing. Why does it say to install HardSPL, then CID unlock?
What or why would I need to CID unlock separately? ..or is it the Security unlock bit, Or SuperCID that I'm still missing? There must be some point to it, Because Oli's Does HardSPL then SIM unlock, THEN CID unlock.
Vol22002:
I DID get HardSPL 3.56 installed. I used JumpSPL 1.56. DO remember to yank out the SD and SIM card. Note the very bottom of my post says those stats listed are BEFORE I installed HardSPL.
I still need some more help with finding a ROM, but I suppose that would be best addressed in a new thread, so I'll do that.
Thanks again!
Crogon said:
Lol, Ok where to start..
skr_xd:
If you DON'T need to CID unlock, then the Newb instructions are a bit confusing. Why does it say to install HardSPL, then CID unlock?
Click to expand...
Click to collapse
CID Unlocking is done by installing the Hard SPL, the Hard SPL's don't check the Carrier ID (CID) when flashing new ROM's.
Crogon said:
What or why would I need to CID unlock separately? ..or is it the Security unlock bit, Or SuperCID that I'm still missing? There must be some point to it, Because Oli's Does HardSPL then SIM unlock, THEN CID unlock.
Click to expand...
Click to collapse
SuperCID Set's your CID to 11111111, Security unlock removes an extra check when Flashing Radios to avoid you getting stuck on some radios.
Crogon said:
Vol22002:
I DID get HardSPL 3.56 installed. I used JumpSPL 1.56. DO remember to yank out the SD and SIM card. Note the very bottom of my post says those stats listed are BEFORE I installed HardSPL.
I still need some more help with finding a ROM, but I suppose that would be best addressed in a new thread, so I'll do that.
Thanks again!
Click to expand...
Click to collapse
Just follow all the steps in the Guide by mskip and post and problems you have there. Understanding is not a pre-requisite, with that guide, you can figure out what all the steps do later...
Simply put:
HardSPL / CID Unlock / Super CID - Allows ROM's and Radio's to be flashed.
SIM Unlock - Allows you to use a foriegn SIM card
Security Unlock - Avoids problems when flashing some Radios.
Ta
Dave
DaveShaw said:
SuperCID Set's your CID to 11111111, Security unlock removes an extra check when Flashing Radios to avoid you getting stuck on some radios.
Security Unlock - Avoids problems when flashing some Radios.
Click to expand...
Click to collapse
Hey, thanks for the fast reply Dave!
Ok, So I COULD still Security unlock it, If I could find a security unlocker that worked with 3.56.
The bit about problems flashing radios sounds a bit like something that happens right before your phone becomes a brick. Could you point me to a resource about problem radios or how to avoid them?
I actually prefer to leave the radio alone, if I can get away with it. I just want a patched up ROM, as I mentioned earlier and in my new thread.
Anyway, If I end up needing to replace my radio, how do I avoid 'problem ones'. I understand that some radios simply don't work with some ROMs, but you seem to be eluding to something different here.
Thanks again!!
Crogon said:
Hey, thanks for the fast reply Dave!
Ok, So I COULD still Security unlock it, If I could find a security unlocker that worked with 3.56.
The bit about problems flashing radios sounds a bit like something that happens right before your phone becomes a brick. Could you point me to a resource about problem radios or how to avoid them?
I actually prefer to leave the radio alone, if I can get away with it. I just want a patched up ROM, as I mentioned earlier and in my new thread.
Anyway, If I end up needing to replace my radio, how do I avoid 'problem ones'. I understand that some radios simply don't work with some ROMs, but you seem to be eluding to something different here.
Thanks again!!
Click to expand...
Click to collapse
To Security Unlock, just follow this guide: http://forum.xda-developers.com/showthread.php?t=361236
Then upgrade to HardSPL 3.56 again.
Security Unlocking is done by setting a flag in the NAND. It's permanent (unless you re-lock) and there are no comptability problems once it is set (you need to use a special Hard SPL to set it first though).
EDIT:
There is no list of known bad radio's - only the "Radio from Hell" 1.65.17.10 - but another Radio from hell could appear any day
Ta
Dave
Thanks for clearing that up Dave.
I think I'm going to opt to ignore the security unlock, since it sounds like it's on an 'as needed' basis.
I have 'batter fish to fry' at the moment. I'm grinding gears trying to figure out HOW to figure out which ROMs I should be looking into, in my other thread.
By the by guys, I was joking about the 'hijacked thread' thing, I'm sure somebody will find the info useful.
Just when i though I had this all figured out and was about to Flash my first ROM.
I have read and re-read the flashing wikis and am still confused.
If your on WM6 then you need to use Jockyw2001's Kaiser SuperCID and Security Unlocker v0.1 right? But if you are on WM6.1 then you use Olipro's Kaiser SIM/CID Unlocker & Changer right?
Well I am currently on WM6 pro and dont want to upgrade to 6.1 just to use Olipro's program. So I would go with Jocky's right. Then people say you need to flash a HardSPL first before doing the SuperCID and Security Unlocker. But then in Jocky's directions it says Note that the security unlocker does not work with "SPL-3.28.Hard" and "SPL-3.29.Hard".
So what SPL do you start with.
And I know Dave already told me this earlier that since I have an AT&T Tilt and I am with AT&T service then I dont have to worry about SIM unlocking obviously. So can I skip the whole CID/SUPER CID/SECURITY UNLOCK routine. Can I just Flash HardSPL 3.29 or 3.56 and then start playing with ROMS till my hearts content or is all the security stuff really that neccessary?
So I am lost once again. Wow. I dont know why I am not getting this.
P.S. On another note, I am using AT&T Tilt with shipped ROM running WM6 pro. I have about 40-50 programs installed on it. When first setting up my phone I did the soft reset which supposedly gets rid of the bloatware. Anyways, with all my programs and it being the stock ROM I still have 62MB free PROGRAM RAM. I do however only have like 30MB Storage RAM. But 62MB of free PROGRAM RAM. I see people with naked ROMS that only get like 55MB of free PROGRAM RAM, is my phone like magic or something? Just curious as to how this may be possible.
asofiker said:
Just when i though I had this all figured out.
I have read and re-read the flashing wikis and am still confused.
If your on WM6 then you need to use Jockyw2001's Kaiser SuperCID and Security Unlocker v0.1 right? But if you are on WM6.1 then you use Olipro's Kaiser SIM/CID Unlocker & Changer right?
Well I am currently on WM6 pro and dont want to upgrade to 6.1 just to use Olipro's program. So I would go with Jocky's right. Then people say you need to flash a HardSPL first before doing the SuperCID and Security Unlocker. But then in Jocky's directions it says Note that the security unlocker does not work with "SPL-3.28.Hard" and "SPL-3.29.Hard".
So what SPL do you start with.
And I know Dave already told me this earlier that since I have an AT&T Tilt and I am with AT&T service then I dont have to worry about SIM unlocking obviously. So can I skip the whole CID/SUPER CID/SECURITY UNLOCK routine. Can I just Flash HardSPL 3.29 or 3.56 and then start playing with ROMS till my hearts content or is all the security stuff really that neccessary?
So I am lost once again. Wow. I dont know why I am not getting this.
Click to expand...
Click to collapse
There is a Hard SPL 1 by pof. Flash that first then follow Jocky's instructions.
Also the OliPro Security unlock isn't permenant, next time you flash a Radio it's gone.
Ta
Dave
Ok so Flash the Hard SPL 1 by pof
Then follow Jockys directions in using his Kaiser SuperCID and Security Unlocker v0.1
Then Flash either HardSPL 3.29 or 3.56. WHichever I choose?
Then go crazy with playing with different ROMS.
P.S. So every time you Flash a HardSPL it overwrites the previous one? Or do you have to get rid of a HardSPL first before putting a new one on?
asofiker said:
Ok so Flash the Hard SPL 1 by pof
Then follow Jockys directions in using his Kaiser SuperCID and Security Unlocker v0.1
Then Flash either HardSPL 3.29 or 3.56. WHichever I choose?
Then go crazy with playing with different ROMS.
P.S. So every time you Flash a HardSPL it overwrites the previous one? Or do you have to get rid of a HardSPL first before putting a new one on?
Click to expand...
Click to collapse
Flashing a new SPL overrides the old one.
You said before you were happy with WM6.0, if so use either the pof Hard SPL v1 or the jockyw Hard SPL v1.1 (Part of the security unlock); if you are using WM6.1, use one of the jockyw or cmonex Hard SPL 3.**. Using the wrong version won't break your phone, but Windows will randomly freeze.
Ta
Dave
Thanks again Dave for helpin me out and not tearing me a new one. But just one last question.
If I find a new ROM that I want to Flash and it uses WM6.1 then I have to make sure that I flash a HardSPL 3.xx before flashing that new ROM, is that what ur saying?
Related
does any one now how to lower the spl . when u start the ppc mine is 3.08 and i need it lower so i can unlock my phone
Well, my guess is that your phone is already unlocked if your SPL is 3.08.
Is is a G3 or G4 Wizard?
G3 But I Wont To Put Black Diamond On It
So just try to launch the setup for BD to know if it really isn't already unlocked (in case it is, the Rom will install, and if it isn't, then it just won't, so theres' no risk for your phone.
Ya It Says Like Bnf Error
So you just have to follow the Wiki:
http://forum.xda-developers.com/showthread.php?t=263116
i need to downgrade me spl first i no how to unlock it
So what? Can't you READ? Everything is written in there, including the way to downgrade.
Here is a link to the adequate Rom since you seem so lazy...
Good luck
http://c4software.another-team.com/wm5.0/Downgrade/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
lol im not lazy i have read so many tutorials on to unlock to phone
Just to forewarn you, do not install the downgrade ROM until you bring your IPL/SPL down from 3.08 to 2.xx. If you don't you may end up like a lot of other people on here where you can't upgrade the IPL after you get done unlocking your phone and go to install WM6. To get it down, just go to your service providers website and download their official version of their ROM and install it first and that should bring your IPL/SPL down to a 2.xx version, then flash the downgrade ROM.
xeno1 said:
Just to forewarn you, do not install the downgrade ROM until you bring your IPL/SPL down from 3.08 to 2.xx. If you don't you may end up like a lot of other people on here where you can't upgrade the IPL after you get done unlocking your phone and go to install WM6. To get it down, just go to your service providers website and download their official version of their ROM and install it first and that should bring your IPL/SPL down to a 2.xx version, then flash the downgrade ROM.
Click to expand...
Click to collapse
I did find one workaround that appears to almost always work is to have a minisd with a dumped raw image of a previous rom with ipl/spl included (r2d all command)...this was able to downgrade a phone on 3.08 back to 2.24 even after having gone to wm6. (it downgraded it back to wm5 at the same time)...conventional flashes were failing due to the ipl/spl.
ok thanks i will do that then i will unlock smart thinking
famewolf said:
I did find one workaround that appears to almost always work is to have a minisd with a dumped raw image of a previous rom with ipl/spl included (r2d all command)...this was able to downgrade a phone on 3.08 back to 2.24 even after having gone to wm6. (it downgraded it back to wm5 at the same time)...conventional flashes were failing due to the ipl/spl.
Click to expand...
Click to collapse
Yeah, downgrading your IPL/SPL is easy, it's when you go from a 3.xx IPL/SPL straight to a 1.xx IPL/SPL that can cause problems, like your IPL sticking at 1.01 afterwards and not wanting to upgrade back to a higher IPL.
YA but i cant find a downgrade for my spl
In the future, don't send private messages to people who haven't contributed to this thread. If you can't figure out how to downgrade and/or unlock your phone after reading the many, many threads on how to do it, I suggest sticking with WM5.
Here, run this. It's an IPL/SPL version only. It won't affect anything you info or programs you have loaded on your phone right now, all it will do is lower you back down to an IPL/SPL of 2.26.
ya that made me ipl 2.26 not my spl
That's not normal, try running it again. I think I just put a file that will change it to 2.25 in another post that you started. If the 2.26 one doesn't work after running it again, try the 2.25 one and see if it works for you.
Just install a factory T-Mo or Cingular ROM
(Gotta locate 1 yourself)
You'll lose all your info but you wanted to flash another Rom anyway.
You gotta keep a factory Rom handy when things go wrong
cujo did you just buy an 8125 because you think it looks cool or do you actually understand the phone? It seems to me like you should be using a razr or something less complex than that...
I followed Dr. Puttingham's thread and Yippie's thread to a tee in addition to reading threads in this forum for a good number of hours each day for two weeks. Yesterday, I became brave enough to downgrade my 2.26 Ipl / 2.26 spl; GSM 2.25.11; OS 2.26.10.2 MDA with a goal to upgrade to a custom WM6 rom with touchflo.
* Started with flashing the button rom then cid unlock with lockwiz2b which looked successful no errors but got a 1.xx IPL / 2.26 SPL since I got a 2.26 SPL then
* flashed the wizard love rom then then cid unlock with lockwiz2b which looked successful also but got the same results - a1.xx IPL / 2.26 SPL again then
* flashed the 2.26 T-mobile rom from the Tmobile website then
* flashed NBD 8.3 only to go back to Tmobile's 2.26 rom - DISAPPOINTED after two hours...............
Any assistance would be appreciated without bricking my MDA. Also, I read the thread on how to install a 2.x rom in a cid locked G3, this method appears a little bid complicated and if I need to move forward with this method, would this method work for any WM6 rom with touchflo and if somebody could simplify the method in layman's terms for newbie's like me could understand, please advice.
Let me know if I missed anything in the process.
Thanks, Technobuff
After u do cid unluck and sim unluck and its reboots do a downgrade again to the button rom and ur ipl and spl will change.(u do not have to re-due the onlucking procedure again)
I tried again performing Dr. Puttingham's CID unlocking process in terms of flashing the button rom then the CID unlock process using Lokowiz2b but while I am at the DOS screen trying to CID unlock my MDA it the DOS screen showed unlocking phone........DO NOT DISCONNECT UNTIL THE PHONE REBBOTS.
This process went on for 5 then 10 then past 30 minutes until I gave up. To be on the safe side I turned off the LAPTOP by taking the battery then pulled the USB cable from the PC to the MDA.
What is the typical timeframe for the unit to CID unlock? Why is is it hanging? Am I missing or skipping the process? How can I complete the process?
Any help would ber greatly appreciated by newbies who read threads.
Technobuff
The problem is that you need to have an IPL/SPL of 1.xx before you try to unlock your phone. CID unlocking will not change your SPL which means that you had an IPL of 1.xx and an SPL of 2.26 before you even tried to unlock. You need to reflash the button ROM over and over until your IPL and SPL both show 1.xx and then run lokiwiz.
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
unlock problem
if your device doesn't reboot almost at once after the unlock, it probably didn't work. That is what happened to me. Did you get four lines of File cannot be opened or a similar message? I got that from following the 17 steps carefully. What was wrong for me was unzipping to the root directory of C:/. When I redid it to the desktop and executed from there, no problemo.
Your symptoms sound exactly like mine. I posted a longer thread, somewhere....
LH
Ok i did a little booboo and yesterday was using equinoxe's softspl tool by mistake (didn't notice i had a g3), this causes you to actually end up with the exact same os you had before you flashed.
The best advice I can give: Open the Dr's guide and follow every step closely. (also just found this guide. Its a bit simpler http://forum.xda-developers.com/showthread.php?t=305225)
Once you CID unlock you should be able to use the RUUs to flash.
Make sure everytime you do any of the steps that dr. putt gives to be comepletely synced to activesync.
Also dont forget to load enablerapi.cab on your wizard.
Also you must use the unlock function before the cid unlock function in lokiwiz.
OH also the unlock will work after your ipl drops to 1.xx After you do the unlocks reflash button to drop the spl to 1.xx Then just flash up to a higher IPL/SPL as the Dr states.
If it seems unorganized im sorry =P
4irm said:
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
Click to expand...
Click to collapse
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
slod said:
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
Click to expand...
Click to collapse
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
thanks. helps me to learn stuff.
CID???
how wil i know if my fone mda vario is CID unlocked?
it is now installed with t-mobile 2.26 ROM
thanks.
rizortiz
famewolf said:
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
Click to expand...
Click to collapse
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
4irm said:
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
Click to expand...
Click to collapse
Perhaps they want it actually cid unlocked for resale value...or perhaps they prefer the RUU method of installs vs having to use shelltool.
Just so I don't get flamed to bad for asking a what some would consider a simple question, I had an 8525 that I made SuperCID and HardSPL, so I have done this before. I have also read the majority of material in the wiki and the forums on what I would like to do.
So here goes,
I just purchased the Tilt and am looking to do the same. It is stock to the block right now.
ROM 1.62.502.0
Radio 1.27.14.09
Protocol 22.45.88.07H
My question is what is the sequence of events that I need to do in order to get my phone SuperCID and HardSPL to the point I can start using some of these wonderful 6.1 ROMS?
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
Now what SuperCID? I found 2, here http://forum.xda-developers.com/showthread.php?t=361236 and here http://forum.xda-developers.com/showthread.php?t=375583
Any guidance would be very appreciated.
Thanks for your help
JD
The hardSPL depends on the ROM you're going to flash. Some ROMs work better with certain SPLs. Check.
For ease of mind, hardSPL first then security unlock. You can't go wrong in that order.
JudgeDredd67 said:
Just so I don't get flamed to bad for asking a what some would consider a simple question, I had an 8525 that I made SuperCID and HardSPL, so I have done this before. I have also read the majority of material in the wiki and the forums on what I would like to do.
So here goes,
I just purchased the Tilt and am looking to do the same. It is stock to the block right now.
ROM 1.62.502.0
Radio 1.27.14.09
Protocol 22.45.88.07H
My question is what is the sequence of events that I need to do in order to get my phone SuperCID and HardSPL to the point I can start using some of these wonderful 6.1 ROMS?
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
Now what SuperCID? I found 2, here http://forum.xda-developers.com/showthread.php?t=361236 and here http://forum.xda-developers.com/showthread.php?t=375583
Any guidance would be very appreciated.
Thanks for your help
JD
Click to expand...
Click to collapse
Ok, so I don't know about the super cid process but here's at least how you can start the journey:
Copy KAIS_SSPL onto your device
take out sim card and SD card
run KAIS_SSPL
Unplug USB wait 5 -15 seconds, plug in.
Run the Hard_SPL of your choice depending on your ROM choice. Seems like the ones out there are using 3.56, but it varies
Make sure to also flash a compatible radio!
Viola! you are done and ready to flash a ROM!
JudgeDredd67 said:
J
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
JD
Click to expand...
Click to collapse
1.) Flash 1.1JockyW HardSPL
2.) Using Jockys SuperCID process security unlock your device.
3.) Flash to any other HardSPL
4.) Flash the ROM of your choice.
Thank you all for your comments. I feel a lot better going into this now.
Noob question sorry. Sequence of events....
Appologies in advance as this is obviously a nooby question....
I have just aquired a t-Mobile branded MDA Vario III. I want to CID/SIM Unlock it as well as Hard-SPL it so I can install whatever ROMs I would like.
I previously had a HTC Wizard that I CID & SIM unlocked with the Lociwiz tool, however I had to downgrade the IPL/SPL to version 1.x to get this to work. Once it was unlocked I was able to install any ROM. I am looking for a similar thing with my new Kaiser and I can't find a Wiki or guide explaining the steps. It seems there are 1.x HardSPL's as well as Security unlockers, plus 3.x HardSPLs but no definitive guide as to the correct sequence.
1. I want to unlock the phone so I can use any SIM
2. I want to unlock the phone so I can install any ROM
With the Wizard I had to downgrade IPL/SPL run the Lokiwiz tool and the upgrade to whatever I wanted. How do I do the same with the Kaiser?
Sorry....
Andy
ADB100 said:
Appologies in advance as this is obviously a nooby question....
I have just aquired a t-Mobile branded MDA Vario III. I want to CID/SIM Unlock it as well as Hard-SPL it so I can install whatever ROMs I would like.
I previously had a HTC Wizard that I CID & SIM unlocked with the Lociwiz tool, however I had to downgrade the IPL/SPL to version 1.x to get this to work. Once it was unlocked I was able to install any ROM. I am looking for a similar thing with my new Kaiser and I can't find a Wiki or guide explaining the steps. It seems there are 1.x HardSPL's as well as Security unlockers, plus 3.x HardSPLs but no definitive guide as to the correct sequence.
1. I want to unlock the phone so I can use any SIM
2. I want to unlock the phone so I can install any ROM
With the Wizard I had to downgrade IPL/SPL run the Lokiwiz tool and the upgrade to whatever I wanted. How do I do the same with the Kaiser?
Sorry....
Andy
Click to expand...
Click to collapse
Since you are a Senior Member, you should already know the first rule is to search before creating new threads. However, since I am in a good mood from starting my new job this week, I will "help" you out. Check out the threads below, and after some in-depth reading, all of your question will be answered.
HardSPL: http://forum.xda-developers.com/showthread.php?t=334679
Sim Unlock: http://forum.xda-developers.com/showthread.php?t=361039
Now here is your nickels worth of free advice: Do NOT attempt to run the SIM Unlocker with a WM 6.1 ROM or the 3.xx HardSPL installed.
Closing this thread so it can fade away....
So I have followed the guides, two of them conflicting each other (one tells me Wizard Love while other says Button)
So I pick wizard love because I did the factory update a few years back to 2.25
use loki3
run tmobile 2.26 and it fails
run the 3.08 and it works
try to install TNT roms... all get stuck at 99% except one but the rom doesn't work because I am still on windows 5.1
Now on my third attempt it gets stuck at bootloader. Can't get the phone to turn back on to normal mode just to use it and forget about trying these roms
Any ideas?
Got button to work some how
Now I am at IPL 1.01 and SPL 3.08
Hopefully I can redo everything and get 6.1 to work
It tells me my CID/SIM but no where does anyone tell me where I need to insert this ID code at.
ID code? What do you mean by that?
I ment CID, it was telling me the CID like if I needed to enter some sort of menu and run it
Running t-mobile rom again, hopefully this works
You sure that it wasnt asking for a SIM unlock code? OR was it giving you a "data crashes" message?
Nope neither of those.
Anyways
Tmobile screen pops up now with 2.26/2.26
In regards to installing new roms, do I just launch ROMUpdateUtility or Do I need to do a CID unlock again?
Also saw there is 3.08/3.08 available, Update before or after upgrading the wm6.1 rom?
Well, lemme ask you this, what is your device? Is it a G3 or a G4, if G3, then sure, update your IPL/SPL after you upgrade. If it is a G4 however, FOR THE LOVE OF TUNA DO NOT upgrade your IPL/SPL or you will have a brick on your hands. And also, if you have used HardSPL, then no, you do not have to CID unlock your device again. Personally, I just use the SoftSPL method each time I load a ROM. If your device is a G4, I have made a guide in the G4 section that should help you. Its got screenshots and such aswell.
G3
Yay somehow it worked this time, 6.1 is nice
I did softspl
3.08 worth it?
If you device is G3 - FORGET HARDSPL
You mention that you have IPL 1.xx and SPL 3.xx
get WST - Wizard Service Tool and follow the instructions to cid unlock you device, unfortunately you cannot unlock your SIM with the SPl that you have for now
After that flash a carrier ROm to align your IPL/SPL to 2.xx
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Ok, you have a G3 device
Get WST: http://forum.xda-developers.com/showthread.php?t=329170
Install in your PC (XP not Vista), check the situation about your CID and SIM
If you have CID unlock = SUpercid you can flash any ROm you want, if not you must downgrade to IPL/SPL 1.xx (Button Rom)
WST Unlock only works with IPL/SPL 1.xx
Note that SIM can only be unlocked with your SPL as 1.xx
go on run, type msconfig and open that, close all microsoft services and install,
Ckamc said:
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Click to expand...
Click to collapse
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
HAHAHAHA
S.V.I said:
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
Click to expand...
Click to collapse
You know when an oportunittie comes huh!
I can buy it too but its more glad to see a wizard function well with 6.1
hope you can unlock and upgrade... if not... READ a lot.
Losing Mind (again)
OK, here we go.
First off, I am in no way new to Flashing or the logistics behind it. I am sure this is just something that I cant find by searching. But my problem is this.
I have a G3 TMOBILE USA MDA (Wizard). I have used the lokiwiz2 unlock software several times and according to the program I am SUPERCID unlocked. I am able to flash ROMS all day long. I get no error about loading. What is happening is that I almost always end up with the same default ROM after the FLASH is completed. I am now sitting with the Button ROM on the unit. I assume if the Button ROM loads, then I should be CID Unlocked otr it would not load (or is this my mistake in thinking?)
As my MDA sits now, I have the Beer Mug Displayed, IPL 1.05
SPL 2.26 GSM 01.12.10 OS 1.5.4.2
Now, if I go and try to Flash to one of the Two ROMS I want to go to
TMOUS_MDA_5.2.1629_Wing_Port_1.1 (Boring ROM) or I try with SNN 3.1 it will run the procedure perfectly, and I will end up with a Barebones version of Windows Mobile 5.0. This is wild.
Has anyone seen this happen and is laughing and going "Been there, here is the problem,,) or do I need to discuss this in more detail.
Im wondering if the ROM Upgrade Software is grabbing a ROM from elsewhere on my Hard Drive and is installing it from cache or something like that. Is there another version of the OS Upgrader that allows me to tell it exactly what ROM I want installed, instead of just installing whatever it wants.
Thanks for the help, after two days of searching and looking around, I can deal with amteur hour emabreesment, just HELP!!
My xv6800 and my 8125 was a breeze compared to this nitemare. (BTW, I also flashed this 2 years ago with the TMOBILE USA Official Release, no issue)
wyreless
Well,these are symptoms of CID not unlocked.Button's Rom flashed doesn't mean its CID unlocked,its a patched IPL/SPL rom simply to downgrade to IPL/SPL 1.xx for CID unlocking.
Simply,download WST_4.2.2 and run it to verify the CID lock/unlock status of the phone and do the right thing onwards.
Thank You Zabardast for the quick and to the point answer.
I was thinking in the back of my head it was a CID issue. It was just that everything seemed to be "moving right along". I sthere an easier or better Unlocking soiftware then lokwhiz for the Wizard Series, specifically my USA Tmobile MDA?
Well,if you have Button's Rom running successfully,so its IPL/SPL must be 1.xx already,there shudn't be any problem to use lokiwiz02b to CID unlock the phone,you can even use WST_4.2.2 tool also to easily CID unlock the phone.
There's no other method known to get CID unlocked a wizard freely,unless you are ready to pay to IMEI company to get a unlock code
hey alll..ok i screwed up
i downloaded Charecters ROM..i used WST and it showed that my device is G3 and its CID locked..well i just started the Flashing and it stuck at 99%
now it wont load any ROM and just as i came from school..its not evening starting..its not evening charging..please help any one
for one to flash a rom you must CID unlock it first...
I am a noob at flashing and this may have been explained already but i need better clarification.
I had previous sim and cid unlock my phone which is an Att tilt to now function with the T-mobile network.
In my my tri-color screen I have:
KAIS1*0 MFG
Spl-1.0. OliPof
CPLD-8
My radio is R 1.27.12.11
I used Olipof Hard Spl from my understanding,but I want to flash a new rom preferably Dutty v4. What I wanted to know is do I use a new Hard Spl since the rom is current and if so do I have to go through the same process? Also how do I actually flash the rom?
Again I know noob questions I apologize and would really appreciate your help and patience.
tony612 said:
I am a noob at flashing and this may have been explained already but i need better clarification.
I had previous sim and cid unlock my phone which is an Att tilt to now function with the T-mobile network.
In my my tri-color screen I have:
KAIS1*0 MFG
Spl-1.0. OliPof
CPLD-8
My radio is R 1.27.12.11
I used Olipof Hard Spl from my understanding,but I want to flash a new rom preferably Dutty v4. What I wanted to know is do I use a new Hard Spl since the rom is current and if so do I have to go through the same process? Also how do I actually flash the rom?
Again I know noob questions I apologize and would really appreciate your help and patience.
Click to expand...
Click to collapse
if you want to update your hardspl to one of the 3.** hardspls released by jockyw, you can. These hardspl's were released to get rid of the screen freezes reported by everybody using wm6.1 on the old hardspl's. If you have done hardspl flash before than use the same procedure to flash one of the newer hardspls.
Check dutty's thread for what hardspl he recommends. Most commonly advised are 3.29 and 3.28; i had 3.56 and never had any problems with any of the roms.
To flash the rom you have to make sure your device is connected to pc via activesync. Than basically you have to uncompress the rom rar that you downloaded from here. In your folder you will have a ruu_signed.nbh and a kaisercustomruu.exe. You start the flash process by clicking (or double clicking) on the kaisercustomruu.exe. MAKE SURE YOU PHONE IS CONNECTED TO PC when starting this process and battery life is atleast 50%.
Oh and you should always read the wiki to gain more insight related to your device as your question is asked quite often and before posting you SHOULD HAVE checked this thread:
http://forum.xda-developers.com/showthread.php?t=433835