Database Info

Place for Newbs to get Started-Want Tilt to Look Like Touch

Any advice? I am new to this whole thing. Have done some overclocking and what not on my PC, but this is a whole different game.
What types of things can I do without risking really f'ing things up?
What I hope is the simplest things I was hoping to do was to make my TILT screen look like the HTC Touch.
I thought about downloading Dutty's tweaks, but I am thinking I might be out of my depth starting out.
I would like to learn some things, but don't want to annoy the veterans that are here. Any direction would be appreciated.
Thank you.

What you could do is read, all the post people have put to do exactly what your asking. All the info is there you just need to search and read or use the wiki.
Have fun
-McMex

Thank you.

Download and run HardSPL on your phone from:
http://forum.xda-developers.com/showthread.php?t=334679
Then choose a dutty rom to install, since you are on a tilt try:
http://forum.xda-developers.com/showthread.php?t=345385&highlight=dutty+tilt
This is all you have to do to have a fully functional htc looking rom with the touchflo cube with the newest drivers and radio for AT&T. I am using this one on mine right now. This rom has everything that you will probably need already installed. Anything else will just be for personal preferences. This rom has an advanced config program which is great but also download kaisertweak for some nice settings.

Thanks for keeping it simple for the newb. I read a couple of things about the "radio" portion being an issue. What does the "radio" tweak mean and will a HARD RESET fix problems if I decide to revert back?
decimusmaximus7 said:
Download and run HardSPL on your phone from:
http://forum.xda-developers.com/showthread.php?t=334679
Then choose a dutty rom to install, since you are on a tilt try:
http://forum.xda-developers.com/showthread.php?t=345385&highlight=dutty+tilt
This is all you have to do to have a fully functional htc looking rom with the touchflo cube with the newest drivers and radio for AT&T. I am using this one on mine right now. This rom has everything that you will probably need already installed. Anything else will just be for personal preferences. This rom has an advanced config program which is great but also download kaisertweak for some nice settings.
Click to expand...
Click to collapse

The radio that comes with this rom will be the one you need. A hard reset only reinstalls the rom you currently have on the phone so to revert back you will have to choose another rom and install it. As long as the rom you install is an AT&T one or one made for the tilt then you won't have to do anything with the radio. If you change and use an HTC ship rom or one of dutty's other roms then you will have to download another radio and install it. Radios self install the same way as roms do.
This is the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
On this page is the link to the ftp area where you could download the older radio if you decided to go to a non tilt rom.

Did you have any keyboard problems when doing the HARDSPL and installing the dutty rom. Also, which of the dutty roms did you install? Beta 2?

I am still on the Beta 1 and have been too lazy to changeover yet as Beta 1 is solid.
If you really want a good "How To" check out Mr. Van X:
http://www.mrvanx.org/cms/index.php...ask=view&id=65&Itemid=26&limit=1&limitstart=0
Every place he says "Hermes" you just think "Kaiser" or "Tilt". All the steps are the same. It is a great walk-through. He has you download the .net framework first. I know I didn't have it. Then he steps you through hardSPL and finally the ROM.
A few weeks ago I followed this exactly and have never had any troubles. Why a walk-through like this is not in the Wiki for the Kaiser/Tilt I have no idea. It'd be a lot more helpful to newbs (like myself) than the forum fav response, "Read Dammit".

Augster said:
It'd be a lot more helpful to newbs (like myself) than the forum fav response, "Read Dammit".
Click to expand...
Click to collapse
Why don't you write an entry for the wiki? That's how the Wiki is updated and maintained, by contributions by everyone.

afavre said:
Any advice? I am new to this whole thing. Have done some overclocking and what not on my PC, but this is a whole different game.
What types of things can I do without risking really f'ing things up?
What I hope is the simplest things I was hoping to do was to make my TILT screen look like the HTC Touch.
I thought about downloading Dutty's tweaks, but I am thinking I might be out of my depth starting out.
I would like to learn some things, but don't want to annoy the veterans that are here. Any direction would be appreciated.
Thank you.
Click to expand...
Click to collapse
I just used HardSPL and Dutty's Hybrid Rom No 5. I'm not sure what the difference is from his Tilt Beta version but I tried both and decided to go with the Hybrid. Point is, until last night I did not know what a Rom was. I read the forum and followed the directions. Here are links to what I used.
HardSPL (you need to do this first). Everything you need to know is in the first post
http://forum.xda-developers.com/showthread.php?t=334679
Then find a ROM. I downloaded several including the stock ATT rom just in case I decided to go back. The steps for loading a ROM are almost the same as HardSPL, just follow the directions on the screen.
This is a link to Dutty's Tilt Beta ROM (all you need is the link to the ROM at the bottom of the first post). If you want to try Dutty's Hybrid ROM, scroll to the 3rd post made by username "alltheway" and click on the red Hybrid No 5 Rom link in his signature block.
http://forum.xda-developers.com/showthread.php?t=345385
It is very simple to do.

Do I need to SIM Unlock?
I have been reading through the posts, and I can't find if I must SIM lock my phone before trying to install Dutty's ROM. On my 8125 the general concensus was unlock both. I don't have any need to run other radio's on my phone, and I won't be traveling out of the US.
Also I am currently running SPB Pocket Plus 4.01. Should I do a hard reset before trying to CID unlock and load of new rom?

ShinySideUpAZ said:
I have been reading through the posts, and I can't find if I must SIM lock my phone before trying to install Dutty's ROM. On my 8125 the general concensus was unlock both. I don't have any need to run other radio's on my phone, and I won't be traveling out of the US.
Also I am currently running SPB Pocket Plus 4.01. Should I do a hard reset before trying to CID unlock and load of new rom?
Click to expand...
Click to collapse
No you do not

How should I choose a ROM?

I've very new to all this, having used a non-PDA/smartphone (SE637) for many years before purchasing a Tilt. While quite PC-literate, I find myself very intimidated with all this. I read as much as my mind allows before requiring large quantities of diet-coke -- then I need a nap to calm myself down from the soda before reading any more, or my head explodes.
I think that I need a new ROM, but I'm not sure why! Everywhere I read, that's what I'm told.
This community is very knowledgable and seems very helpful. As this appears to be more for developers than users like me, I'm hesitant to ask my question for fear of offending a developer, which isn't my intent. I'm looking for information that might assist me in choosing which ROM to use.
I suppose that I want the phone to run faster, be easier to use/see (I don't see as well as I did 50 years ago... ), and have the latest of whatever is the best at the moment, spending as little as possible in the process. A truly never-ending story...

Before you start flashing decide what's important to you. Are you looking for a certian look & feel? Is fuctionality more important or do you want spped/stability?
Then research the different Roms, most include feature lists & screen shots in the first few posts of the thread.
So what it really comes down to is a lot of reading.
Oh and be sure to HardSPL your device BEFORE doing anything.

Also, like kyphur said read and do the hardSPL first but for me I found it's most helpful just to try some. Download a few, flash them give it a whirl and see what you like. Once you try a few you'll find options and programs you love and will start looking for roms that have what you need and more importantly what you don't like. And if you never find anything you love then start cooking. There are a lot of great wikis here to guide you step by step.
Hope this helps.

Start with Wiki first. Once you hardspl, load your first rom. You will find how easy it is and start to flash more roms like crazy. Experiment, and then you will find what you like. After flashing your first rom, you will realize how much better your new rom is compare to the stock rom.

just start off by choosing a few roms...then read about it as the chef would describe their rom...see which one fits u most...then make sure u read teh wiki and faq before u actually start ur flashing...to make sure nothing goes wrong...and then if that doesnt fit u..try another rom..but all the roms here...are better than stock for sure

I knew this wasn't going to be easy... Rating system anyone? I suppose I'm also nervous about doing a first flash. What about CID and SIM unlocking?

MarkAtHome said:
I knew this wasn't going to be easy... Rating system anyone? I suppose I'm also nervous about doing a first flash. What about CID and SIM unlocking?
Click to expand...
Click to collapse
HardSPL removes the Carrier lock (CID) from your phone. As for SIM unlocking, I haven't bothered yet because I don't travel anywhere that AT&T doesn't provide service.
Once you've done your share of reading, if you are still confused about what type of ROM you are looking for, check out whatever the latest Dutty release is at that point in time. Dutty's Kaiser ROMs are probably the most popular on XDA.
I use a [somewhat] clean ROM myself, with the bare minimum preloaded. This way I can install what I need, and not worry about wasted space for programs I don't use.

eenie meenie minie moe
j/p
however, for Christ sake, please have hardspl installed.
Just pick one by reading the changelogs usually located in the first couple of posts.

P1Tater said:
eenie meenie minie moe
Click to expand...
Click to collapse
Yours sounds best!

NotATreoFan said:
HardSPL removes the Carrier lock (CID) from your phone. As for SIM unlocking, I haven't bothered yet because I don't travel anywhere that AT&T doesn't provide service.
Once you've done your share of reading, if you are still confused about what type of ROM you are looking for, check out whatever the latest Dutty release is at that point in time. Dutty's Kaiser ROMs are probably the most popular on XDA.
I use a [somewhat] clean ROM myself, with the bare minimum preloaded. This way I can install what I need, and not worry about wasted space for programs I don't use.
Click to expand...
Click to collapse
Is there a Tilt-specific version (currently with ATT's latest released ROM) of HardSPL that avoids all the headaches I'm reading about?
I'm still not sure how this works, but if I were to go Dutty's, should I look for UC - from what I'm gathering, I could then get a minimum ROM version, choose what I want added, then somehow update that bare ROM to include my choices, keeping all my settings in the process? A hard reset, if needed, would restore the new UC basic ROM along with what I added -- do I have this right?

MarkAtHome said:
Is there a Tilt-specific version (currently with ATT's latest released ROM) of HardSPL that avoids all the headaches I'm reading about?
I'm still not sure how this works, but if I were to go Dutty's, should I look for UC - from what I'm gathering, I could then get a minimum ROM version, choose what I want added, then somehow update that bare ROM to include my choices, keeping all my settings in the process? A hard reset, if needed, would restore the new UC basic ROM along with what I added -- do I have this right?
Click to expand...
Click to collapse
The version of HardSPL required is determined by what version SPL that is on your phone. If you reboot your phone in bootloader mode, you will see a version number for SPL. As long as you follow the directions for that version, you will be fine.

NotATreoFan said:
The version of HardSPL required is determined by what version SPL that is on your phone. If you reboot your phone in bootloader mode, you will see a version number for SPL. As long as you follow the directions for that version, you will be fine.
Click to expand...
Click to collapse
Thanks, NotATreoFan. I found info on what a bootloader is, and this is the info displayed:
KAIS1*0
SPL-1.93.0000
CPLD-8
What should my search criteria look like to find the HardSPL that I need to use?

http://forum.xda-developers.com/showthread.php?t=354061
and i think from your spl version you can pretty much guess which one you have to use

XtreMe_G said:
http://forum.xda-developers.com/showthread.php?t=354061
and i think from your spl version you can pretty much guess which one you have to use
Click to expand...
Click to collapse
Thanks for the help, XtreMe_G. Just so I have this straight, out of the 4 files listed, I only need to download and run JumpSPL1.93-KAIS.zip and I'm done? The Tilt is now prepared to accept any appropriate ROM?

MarkAtHome said:
Thanks for the help, XtreMe_G. Just so I have this straight, out of the 4 files listed, I only need to download and run JumpSPL1.93-KAIS.zip and I'm done? The Tilt is now prepared to accept any appropriate ROM?
Click to expand...
Click to collapse
You need JumpSPL to get started, and then you need HardSPL to flash. 2 zip files total. Memorize the steps prior to starting, and do NOT skip any of them for any reason...

man...I thought I gave you advice yesterday on what to do. Literally, thousands of people have hardspl their roms just fine. Even a couple blonde girls in this forum have done it. It is not that hard and you shouldn't have too much trouble. Just follow the instructions and you will be just fine. After your first flash, you will move couple levels up in knowledge.

NotATreoFan said:
You need JumpSPL to get started, and then you need HardSPL to flash. 2 zip files total. Memorize the steps prior to starting, and do NOT skip any of them for any reason...
Click to expand...
Click to collapse
Will do ask you suggest. Just a thought... by doing this, will anything on my phone be affected (programs, settings, etc.)? I'm, obviously nervous about all this, and while I will follow your instructions with hardSPL, I'm not yet ready to flash a ROM.

thomassster said:
man...I thought I gave you advice yesterday on what to do. Literally, thousands of people have hardspl their roms just fine. Even a couple blonde girls in this forum have done it. It is not that hard and you shouldn't have too much trouble. Just follow the instructions and you will be just fine. After your first flash, you will move couple levels up in knowledge.
Click to expand...
Click to collapse
Your information was very valuable. I just needed a little more detail to help calm my nerves...

Debranding a ATT branded Touch pro(fuze)

I just got a ATT fuze, and I think that all of the att bloatware is slowing the thing down. Is there a tutorial anywhere on how to de-brand it? If not, anybody feel like helping me out with it? I have the unlock code to sim unlock it but thats it.

jwx said:
I just got a ATT fuze, and I think that all of the att bloatware is slowing the thing down. Is there a tutorial anywhere on how to de-brand it? If not, anybody feel like helping me out with it? I have the unlock code to sim unlock it but thats it.
Click to expand...
Click to collapse
Hi, do u mean taking the logo off the front of the device or flashing a faster rom? for rom make sure u flash Hard spl(check the noob guide) and for the logo if its not actually in the glass on the front then u would open your phone cover up and scrape the logo off(not recomended). once u have hard spl u can change the logo that shows when u turn it on and the gay att animation.

That's pretty much what this entire forum is all about. You need to check out the ROM section of the Raphael sub-section and read the sticky's there. I would HIGHLY recommend installing the Energy ROM series. If you are going from the AT&T ROM to that you will be floored with the increase in speed and just overall sexyness.

KevinACrider said:
That's pretty much what this entire forum is all about. You need to check out the ROM section of the Raphael sub-section and read the sticky's there. I would HIGHLY recommend installing the Energy ROM series. If you are going from the AT&T ROM to that you will be floored with the increase in speed and just overall sexyness.
Click to expand...
Click to collapse
Yea, I got that much after I posted. I'll check out the energy ROM, thanks for the recommendation.

reaverclan said:
Hi, do u mean taking the logo off the front of the device or flashing a faster rom? for rom make sure u flash Hard spl(check the noob guide) and for the logo if its not actually in the glass on the front then u would open your phone cover up and scrape the logo off(not recomended). once u have hard spl u can change the logo that shows when u turn it on and the gay att animation.
Click to expand...
Click to collapse
Just the software/firmware. I could care less what the phone actually looks like as long as it works correctly.

Anybody have any recommendations on what ROM to flash? It's actually going to my girlfriend once I get this ATT branding off of it, so the easier to use the better. I was thinking about just loading the unbranded touch pro's ROM if I can find it, unless the cooked ROMs would be ok for someone who probably won't want to reflash ROMs often.

If you need stability, flash a WM6.1 ROM, the WM6.5 ROMs are still beta and a little buggy.

jwx said:
Anybody have any recommendations on what ROM to flash? It's actually going to my girlfriend once I get this ATT branding off of it, so the easier to use the better. I was thinking about just loading the unbranded touch pro's ROM if I can find it, unless the cooked ROMs would be ok for someone who probably won't want to reflash ROMs often.
Click to expand...
Click to collapse
EneryROM - a totally different experience.. try it ...

I think I'm gonna try one of the engeryrom 6.1 ROMs. Thanks guys!
Out of curiosity, lets say that I brick the phone, anyway to bring it back?

jwx said:
I think I'm gonna try one of the engeryrom 6.1 ROMs. Thanks guys!
Out of curiosity, lets say that I brick the phone, anyway to bring it back?
Click to expand...
Click to collapse
To brick your phone implies that is is dead and cannot be brought back.
There are very few instances where a device cannot be bought back.
If you read the Noob flashing guide, make sure you have Hard SPL installed and follow the directions to the letter, you won't brick your phone.
One thing to remember, as you start flashing ROMs, you will want to flash back to stock ROM in between flashing customs ROMs as the RUU wrappers do not completely overwrite the previous ROMs but flashing back to stock does.

Bruce Inman said:
To brick your phone implies that is is dead and cannot be brought back. There are very few instances where a device cannot be bought back.
Click to expand...
Click to collapse
So bricking a phone would be one of those instances where it's not coming back, right? I just want to make sure that I understand it...
Bruce Inman said:
If you read the Noob flashing guide, make sure you have Hard SPL installed and follow the directions to the letter, you won't brick your phone.
One thing to remember, as you start flashing ROMs, you will want to flash back to stock ROM in between flashing customs ROMs as the RUU wrappers do not completely overwrite the previous ROMs but flashing back to stock does.
Click to expand...
Click to collapse
I'm not really planning on reflashing a lot honestly, since it's not my personal phone. If that was the case, then I'd probably play a bit more with it.
It does look pretty straight forward but I always tend to worry a bit when I do something new. I don't really expect anything bad to happen though.

Just a warning, its very addicting....

It looks like it is. I wish my e63 had the same hacks that these have for them. I see a lot of room for improvment on it...

I wouldn't say all the 6.5 ROMs are buggy. Get the latest EnergyROM which is 6.5. The buggy ones are 6.5.1 which are changing the UI.

First.off all lets stop the discussion about which is the best ROM! LOOK FIRST into debloating a stock ROM. Arupenthal and myself have good threads about it. SECOND look into hardSPL and understand what it does. THIRD I agree that a good start would be a 6.1 based ROM again arupp and NRG (2.0) ROMs may be the best start. Careful flashing a stock HTC TouchPro ROM. It may work w/o hardSPL but the keyboard layout differs and requires at least one more cab (fuzekeyboard) and even ATT connection setup.. Be patient read a lot and understand what you are doing and what'ss going on!! It'll take some time but Rome wasn't built in a day either

Noob help w/ATT Fuze + WM6.5

Trying to flash my AT&T Fuze with HardSPL so I can pop a ROM of WM6.5 on it. Not having any luck.
I run the HardSPL executable, it sees the phone (with the current 5.11.XX... ROM version), and then when I hit OK, and see the progress bar (at 0%), it just sits there for about 45 seconds, then gives me a communications error.
Tried this on WinXP and Win7 with the same results. What am I doing wrong?

crescent.wire said:
Trying to flash my AT&T Fuze with HardSPL so I can pop a ROM of WM6.5 on it. Not having any luck.
I run the HardSPL executable, it sees the phone (with the current 5.11.XX... ROM version), and then when I hit OK, and see the progress bar (at 0%), it just sits there for about 45 seconds, then gives me a communications error.
Tried this on WinXP and Win7 with the same results. What am I doing wrong?
Click to expand...
Click to collapse
Is the phone new. We have reports that the SPL Loader changed and prevents flashing HardSPL. Check ur SPL it should not read anything different from 1.90. If it is a higher number then.
Go to the Hardspl thread and flash the 1.90 stock spl frome there first.

Yes, the phone is brand new.
SPL-5.10.0000 is displayed when I enter the bootloader. Would you mind pointing me in the right direction with the HardSPL thread (where I can flash to 1.90)? Can't seem to find it.

crescent.wire said:
SPL-5.10.0000 is displayed when I enter the bootloader. Would you mind pointing me in the right direction with the HardSPL thread (where I can flash to 1.90)? Can't seem to find it.
Click to expand...
Click to collapse
The 1.90 u can find in the HardSPL thread. But check if its ok to get from 5.1 to 1.90
I was more thinking from 1.9XXX to 1.90, so still within the 1.9 loaders. Dunno if its ok for the 5.1 to go down. It should but not shure about that.

Great. I'll check it out. Worse comes to worst, I just may not be able to throw WM6.5 on this, correct?

crescent.wire said:
Great. I'll check it out. Worse comes to worst, I just may not be able to throw WM6.5 on this, correct?
Click to expand...
Click to collapse
well when hardspl works, everything is possible. All the GSM roms are also for fuze afak

http://forum.xda-developers.com/showpost.php?p=4209384&postcount=589
Look through the HardSPL thread, seems that 5.1 Fuze is working with the 1.9 SPL.

Okay, so I was able to boot into the bootloader, where it tells my SPL is 5.1. I can get the HardSPL exe to run and get all the way to the Progress Bar screen (and the phone also jumps to a grey screen with a progress bar), but they both sit at 0% for about 1 min, then it cancels and says "ERROR(262): Update Failed."
Any ideas?

I also had this issue. I did the CID unlock first, then HSPL. I was then able to complete the upgrade.

No joke. I'll have to try that, then.
And, in anyone's opinion, what's the best cooked ROM to be using? EnergyROM?

crescent.wire said:
Okay, so I was able to boot into the bootloader, where it tells my SPL is 5.1. I can get the HardSPL exe to run and get all the way to the Progress Bar screen (and the phone also jumps to a grey screen with a progress bar), but they both sit at 0% for about 1 min, then it cancels and says "ERROR(262): Update Failed."
Any ideas?
Click to expand...
Click to collapse
Are you doing this through activesync. I asume you are. Make sure the file is placed on your main drive of the computer and ran from there. It cannot be in folders hidden. Otherwise it won't work. I had this issue with prior devices while upgrading.

crescent.wire said:
No joke. I'll have to try that, then.
And, in anyone's opinion, what's the best cooked ROM to be using? EnergyROM?
Click to expand...
Click to collapse
That is kind of like asking which is the best baseball team, NASCAR driver, flavor of potato chip or type of candy. Some cooks go for stability. Other cooks go for the latest release. Some cooks throw in all kinds of goodies. Other cooks put an the absolute minimum in the ROM, so the users can add just what he wants. You may hate my favorite ROM and I may hate your favorite ROM. That is why there are so many ROMs to choose from and all these wonderful cooks making them. Try a several different ROMs and see which you prefer.

Mxdadevolper said:
I also had this issue. I did the CID unlock first, then HSPL. I was then able to complete the upgrade.
Click to expand...
Click to collapse
And how might one go about unlocking the CID first?

yamilrx said:
Are you doing this through activesync. I asume you are. Make sure the file is placed on your main drive of the computer and ran from there. It cannot be in folders hidden. Otherwise it won't work. I had this issue with prior devices while upgrading.
Click to expand...
Click to collapse
Yep, doing all that. Thanks, though.

dlweston said:
That is kind of like asking which is the best baseball team, NASCAR driver, flavor of potato chip or type of candy. Some cooks go for stability. Other cooks go for the latest release. Some cooks throw in all kinds of goodies. Other cooks put an the absolute minimum in the ROM, so the users can add just what he wants. You may hate my favorite ROM and I may hate your favorite ROM. That is why there are so many ROMs to choose from and all these wonderful cooks making them. Try a several different ROMs and see which you prefer.
Click to expand...
Click to collapse
A fine point, to be sure.

Sorry, all -- kind of got ahead of myself with all these replies.
So, can anyone point me in the right direction for unlocking my phone's CID?

Simple question
crescent.wire said:
Yep, doing all that. Thanks, though.
Click to expand...
Click to collapse
I have one question. Do you have the phone in "ActiveSynch" mode before running the HardSPL? I found that running it while in the "BootLoader" does not work well, when running the HardSPL.
So, activesynch --> run the hardspl --> make sure you click "Ok", when the phone prompts you, if it is okay to run the 2 executables on your phone --> then watch your phone restart into the "bootloader", then update the hardspl...
Just observation from my past experience...

cso5874 said:
I have one question. Do you have the phone in "ActiveSynch" mode before running the HardSPL? I found that running it while in the "BootLoader" does not work well, when running the HardSPL.
So, activesynch --> run the hardspl --> make sure you click "Ok", when the phone prompts you, if it is okay to run the 2 executables on your phone --> then watch your phone restart into the "bootloader", then update the hardspl...
Just observation from my past experience...
Click to expand...
Click to collapse
Hmmm... I do not have it in ActiveSync mode. I actually have an Exchange connection set up on the phone right now with work. So I should remove that connection, set it to sync ONLY with my desktop, then run HardSPL with ActiveSync 4.5 (on XP) // WMDC (on Vista/7) open?
That's good advice, if I understand you correctly. Thank you!

Did u try to go Stock 1.90 first before doing HardSPL or did u try to flash direct to the unsigned 1.9 ?
As far as I know u have to switch from 5.1 first to the 1.90 signed and then to the unsigned version. See the hardspl thread for more info. Go to this
STEP BY STEP HOW TO RETURN TO STOCK SPL
first.

schnitzelbrain said:
Did u try to go Stock 1.90 first before doing HardSPL or did u try to flash direct to the unsigned 1.9 ?
As far as I know u have to switch from 5.1 first to the 1.90 signed and then to the unsigned version. See the hardspl thread for more info. Go to this
STEP BY STEP HOW TO RETURN TO STOCK SPL
first.
Click to expand...
Click to collapse
Awesome. I'll give that a shot, too. Thanks, guys!

[REQUESTS]I'm taking them..

Anything you want I'll do it.​
Choose the build,
Choose the device (i.e. Herald/Wing keyboard structure),
Software (choose whatever you want in your ROM),
Choose SD or RUU (whether or not it flashed via SD/RUU),
Choose base ROM (Manila2D, Nothing/Light, Shell, Titanium).
EDIT: List of completed Requests :
[[email protected]] http://www.megaupload.com/?d=YE8NS8QI
[dextery] http://www.mediafire.com/?0vpv8fk86dwlcpq
[poliye- 3rd] http://www.mediafire.com/?tkxw5b7tbp95749
[fredfb] http://www.mediafire.com/?p8gbukd56b0xws5
[idunnoV2] http://www.mediafire.com/?i1cc715bd90nngb
[starush] http://www.mediafire.com/?q7edtkgv8dla06d
[hmunozs] http://forum.xda-developers.com/showthread.php?t=659073
[poliye] http://www.mediafire.com/?4m5176oo05cpvj7
[guardian1969] http://www.mediafire.com/?m0oaolwcz54gaif
[sneakyghost] http://www.mediafire.com/?tg13pzgrrxx56ru
In accordance of the XDA Rule#12, I here by state that all applications that are being used in my ROMs are not created by me. And as it is, all tools used to create said ROMs are only used by me, not created. Thank you too all who have created apps for free usage.

Request
Hi Trib,
I have a request:
Build: 6.5.5 (23563)
Device: Wing
Software: None
Flash Via: SD
ROM: Light
Light = Standard Items from OS no third party apps like Oxios. 1 Standard OS icon I don't need is the Screen lock so if possible you can leave that out as well.
This way I can add my apps to your great ROM with the newest versions.
Thanks

guardian1969 said:
Hi Trib,
I have a request:
Build: 6.5.5 (23563)
Device: Wing
Software: None
Flash Via: SD
ROM: Light
Light = Standard Items from OS no third party apps like Oxios. 1 Standard OS icon I don't need is the Screen lock so if possible you can leave that out as well.
This way I can add my apps to your great ROM with the newest versions.
Thanks
Click to expand...
Click to collapse
Do you want a Comm Manager installed?
Do you want the new Mobile IE with flash installed?
Do you want a calculator installed?
And lastly, do you want the boot animations installed?

Tribulattifather said:
Do you want a Comm Manager installed?
Do you want the new Mobile IE with flash installed?
Do you want a calculator installed?
And lastly, do you want the boot animations installed?
Click to expand...
Click to collapse
Do you want a Comm Manager installed? Yes
Do you want the new Mobile IE with flash installed? Yes
Do you want a calculator installed? Yes
And lastly, do you want the boot animations installed? No
Thanks

Okay, give me 20 minutes.
10 to build (not even, lol)
5 to flash on my device and test
5 to upload.
EDIT: http://www.megaupload.com/?d=BFFWPLJ3

Ok havent been here for a while and find it difficult to find my way through now.
Trib, i wasn't able to get to a german 6.5.5 ROM for the HTC Herald thus far. I've seen u writing about it in that other thread of urs, so i was hoping u might have gotten all the nessecary files together by now.
Could u possibly cook a "germanized" Herald ROM pretty much the way SJK had them done in his German ROM Thread?
That'd be a real treat mate.
U kno, just pretty simple basic ROM with nuffin much just titanium style gui and some basic **** like com manager, pretty much O2 stock ROM like.
Could u b doin summert like that?
cheers bro.

Sneakyghost said:
Ok havent been here for a while and find it difficult to find my way through now.
Trib, i wasn't able to get to a german 6.5.5 ROM thus far. I've seen u writing about it in that other thread of urs, so i was hoping u might have gotten all the nessecary files together by now.
Could u possibly cook a "germanized" ROM pretty much the way SJK had them done in his German ROM Thread?
That'd be a real treat mate.
U kno, just pretty simple basic ROM with nuffin much just titanium style gui and some basic **** like com manager, pretty much O2 stock ROM like.
Could u b doin summert like that?
cheers bro.
Click to expand...
Click to collapse
I am working on it now; it's a bit difficult for me because this is only the second time ever I have create a ROM in a different language.
It's like putting a puzzle together with the pieces upside-down to put it to an analogy.

EDIT: German ROM wasn't flashable.

Ok Trib,
Thanks for the ROM. Bricked my Phone tho. Must figure why tho, can't really tell yet. It's still booting the CanonYang HSPL Screen and sometimes says "boot up failed due to sudden loss of Power" and then reboots after confirmed with yes.
Probably unstable USB con.
**** happens. Got my Leo yesterday so it doesnt really matter that much
Cheers for the work anyhow mate.

Ah I'm sorry I couldn't figure it out, to fix that problem you're having right now, just go to the bootloader screen (the Red/Blue/Green/White screen) and then load any other ROM on it and it will work fine.

Alright Trib,
was able to recover Phone by using a Stock RUU without the SPL.nbh.
could not recover with any previously working custom ROM. Weird. SPL somehow corrupt now?
I recommend u take down the Link to that german custom ROM. It seems not to work. Sorry mate.

Okay, now that you're on stock ROM you can HardSPL again.
Once you HardSPL you can flash custom ROMs.

Tribulattifather said:
Okay, give me 20 minutes.
10 to build (not even, lol)
5 to flash on my device and test
5 to upload.
EDIT: http://www.megaupload.com/?d=BFFWPLJ3
Click to expand...
Click to collapse
Trib
Thanks for the custom ROM seems to be working very well. One question is there anything to be done to get more memory out of this build? Or would I need to switch over to one of the other OS versions to get like the 26MB Prog Memory?
Thanks again for all the hard work.

Yeah, But then there would be absolutely nothing on it. Do you want me to make you a ROM that has nothing on it?
EDIT: Hell, lol, I'll make it for you and you can see if you like it ^>^
And don't forget, I get those memory readings after I use oxios close apps and oxiox hybernate that are on my SD card..
Also, don't forget, I don't install .NetCF on there as well, so you'll see that my memory readings are before installing that as well.
The farthest I've ever pushed the Wing was 27MB free Program Memory.

Yes I know you leave out .NetCF and that those readings are after the use of Oxios. I use those as well I just use a version that has been tweaked so the popup box does not come up each time I run it. That way I do not have to close out the box every time. And sure if you are willing to build another I will give it a try just trying to get more back into the 18 to 19 range with my installed apps where the current is more like 15 to 16. Been using your ROMs for awhile now and love what you do, and I thank you for all the hard work. Just wanted to see what was possible to squeeze out of the newest version.
Thanks again.

guardian1969 said:
Yes I know you leave out .NetCF and that those readings are after the use of Oxios. I use those as well I just use a version that has been tweaked so the popup box does not come up each time I run it. That way I do not have to close out the box every time. And sure if you are willing to build another I will give it a try just trying to get more back into the 18 to 19 range with my installed apps where the current is more like 15 to 16. Been using your ROMs for awhile now and love what you do, and I thank you for all the hard work. Just wanted to see what was possible to squeeze out of the newest version.
Thanks again.
Click to expand...
Click to collapse
I've outdone myself ^>^ I was able to get 28.11MB of free program memory and 74.17MB of free storage memory.
http://www.mediafire.com/?mlh954s6ijv6x47
I ran oxios about 3 to 4 times intermittently with hibernate to get that reading.
And thank you for your patronage and for being a long time user of my ROMs :1

Sneakyghost said:
Alright Trib,
was able to recover Phone by using a Stock RUU without the SPL.nbh.
could not recover with any previously working custom ROM. Weird. SPL somehow corrupt now?
I recommend u take down the Link to that german custom ROM. It seems not to work. Sorry mate.
Click to expand...
Click to collapse
I just flashed that ROM I made you and it actually worked on my Wing.. Were you HardSPL'd before flashing?

I was actually hard SPL'd with CanonYang but i ran that again since u recommended it.
It doesnt make any diff. The Herald dies once it got ur ROM on it. Sorry mate. Everytime again, tried it around 10 times.
Its also not possible to recover with a custom ROM, only with a stock one where i took out the SPL.nbh.
Dunno what to think of that weird crap.

Not sure at all why it works for me. I am going to try to make you one more and see what happens.

I'm making you a new one, Sneaky..