Related
Hello, everyone here say that WM6 is much faster than original WM5 rom. I for one have managed to flash every shipped WM6 rom and what can I say: molski AKU 3.3 WM5 is BY FAR the fastest rom! Why is that?
I've encountered many issues connected with using wm6, like: softkey lag (it takes almost 1 sec. for wizard to proceed the softkey. The screen rotation is also slow.
Can anyone tell me what is wrong?
vlodeck said:
Hello, everyone here say that WM6 is much faster than original WM5 rom. I for one have managed to flash every shipped WM6 rom and what can I say: molski AKU 3.3 WM5 is BY FAR the fastest rom! Why is that?
I've encountered many issues connected with using wm6, like: softkey lag (it takes almost 1 sec. for wizard to proceed the softkey. The screen rotation is also slow.
Can anyone tell me what is wrong?
Click to expand...
Click to collapse
When you find out, let me know
I managed to "beat" the TMobile 2.26 in benchmark. System speed is similar, but still not the same thing.
What WM6 ROm version did you actually use to compare and how did you compare?
Lots of people here are now using WM6 including myself and I really don't see any issues regarding performance when you compare to WM5.
So, I suggest you to play little more specially with these recently ones like X-plore 1.1, read the benchmarks and see the difference.
vlodeck said:
Hello, everyone here say that WM6 is much faster than original WM5 rom. I for one have managed to flash every shipped WM6 rom and what can I say: molski AKU 3.3 WM5 is BY FAR the fastest rom! Why is that?
I've encountered many issues connected with using wm6, like: softkey lag (it takes almost 1 sec. for wizard to proceed the softkey. The screen rotation is also slow.
Can anyone tell me what is wrong?
Click to expand...
Click to collapse
vlodeck said:
Hello, everyone here say that WM6 is much faster than original WM5 rom. I for one have managed to flash every shipped WM6 rom and what can I say: molski AKU 3.3 WM5 is BY FAR the fastest rom! Why is that?
I've encountered many issues connected with using wm6, like: softkey lag (it takes almost 1 sec. for wizard to proceed the softkey. The screen rotation is also slow.
Can anyone tell me what is wrong?
Click to expand...
Click to collapse
I thought Molski's 3.3 aku was snail paced, 2.3 aku is by far the fastest. superrom1.1 with NO overclocking is faster than every other rom with overclocking! ymmv
Man, I've tried EVERY rom, starting from UNDERGROUND, through MB, and ending on Xplore 1.1
Each rom has the same issue, softkey lag, and slow screen rotation. Maybe it is faster in TCPMP or in whatsoever. Nevertheless, comparing to Molski WM5 or even T-mobile 2.26 - WM5 is much faster !
When talking of speed why don´t we share sktools benchmarks with and without overclocking to each ROM without any software. Just after hardreset, tweaks, and sktools.
Let´s start to compare??
BTW the overclocking speed that TCPMP shows is more specific than to compare batterystatus vs. omapclock.
Btw. after anichillus will be ready with Xplore 2.0 this discussion will end - because I believe him to create the fastest.
yea xplore 2.0 will be the tits
It would be a neat thing to compare all these roms. One added complexity is that many of the custom roms are by default overclocked, so they would need to be manually throttled down for the comparison to be fair. (For example, supperrom 1.1 is by default overclocked to 252 mhz, Molski's has both smartskey and battery status installed, but I don't remember the default settings.) In addition, filecache and sd cache settings can greatly affect reported sd read speeds. Also, I'm not sure how the benchmarks compare with "real world" speed, but its the best we have for now.
Have fun!
1. Xplore 1.1 (taken from thread) 195Mhz (BS)
2. XPlore 2.0 (early stadium) (taken from thread) 195mhz
Poppamops, a favor...
Since you're running the new x-plore, could you check the following registry values?
HKLM>Drivers>SDCARD>ClientDrivers>Class>MMC_Class:
BlockTransferSize
HKLM>Drivers>SDCARD>ClientDrivers>Class>SDMemory_C lass:
BlockTransferSize
HKLM>System>StorageManager>FATFS:
CacheSize
HKLM>System>StorageManager>Filters>freplxfilt:
ReplStoreCacheSize
I've found these tweaks will increase the reported SD read rate greatly.
Thanks,
Well i think farias wm6 (the real thing) is working awesome and it is so much faster than my mda with wm5. Especially the soft keys and especially the message buttons and internet explorer button on top of the phones. So i highly recommend this rom. And i think you may have a bunk wm6 rom. switch it up to one of the newer ones and you'll see a difference
deviusdragger said:
Well i think farias wm6 (the real thing) is working awesome and it is so much faster than my mda with wm5. Especially the soft keys and especially the message buttons and internet explorer button on top of the phones. So i highly recommend this rom. And i think you may have a bunk wm6 rom. switch it up to one of the newer ones and you'll see a difference
Click to expand...
Click to collapse
At your clock speed no wonder it's going fast.
You'll burn your wizard if you keep it at 299 ...be carefull.
Well i am running Farias rom on my other 8125. I have 2 8125's and 1 MDA. On the one with farias rom it is only overclocked to 260. thats it. Havent really tried anything higher and really dont need to. ITs pretty fast. And Anichillus i have heard some real good stuff about your rom. seriously i had to ponder about which WM6 rom to use. EIther yours or Farias. Its just farias had a couple of programs already included that i needed. But on my next 8125 i will be running Xplore 2. So im looking forward to that one.
299mhz at BatteryStatus is only about 260+mhz in real.
Yeah i think it was about 270 something. somewhere around there
deviusdragger said:
Yeah i think it was about 270 something. somewhere around there
Click to expand...
Click to collapse
Also good for comparing clockspeed is tcpmp. It shows clockspeed
Guys , the BatteryStatus shows the right speed !
Other don't ! How can you trust a program with your CPU if it doesn't even show you right speed ?
How do I know that ? Well , just read clock speed with omap or any other just after flash...it should be 195MHz on a stoc rom ... then contradict me.
I think you're wrong anichillus. We may have 195 mhz omap processor, it runs on 170 mhz in windows though. It is a hardware but software trick.
vlodeck said:
I think you're wrong anichillus. We may have 195 mhz omap processor, it runs on 170 mhz in windows though. It is a hardware but software trick.
Click to expand...
Click to collapse
Can you share something to support that ? Or it's just an affirmation ?
Guys there are a lot of roms created by the genious minds of rom cooks here. id like everyone to share there view of the roms overview and a vote for the best rom cooked for the Universal. Sounds fun huh!
my list (sorry if I missed anyone)
ROM really depends on your needs . If the cook has put in the apps you use, go for his rom. Otherwise it takes up more space adding your own apps - or alternatively go for rDosti/B&L vanilla and add all your own.
The free memory is important to me (being a 64MB Uni owner!!), and I have recorded the free memory on a clean install with no SD card in.
I want working camera, TCMD TCPMP and Route66N7 to work properly (which likes its memory!). I don't use wkTask, but prefer QuickMenu or currently playing with Battery Status (but after making own theme with weather, this took up too much program memory, and although looked nice I decided that I needed functional and not eye candy!). Fast is also good . I also need my Blade BT headset to work with my BT GRPS mouse.
My observations (in no particular order):
Tomal 7.7 OS 19900 (19900'2), 27.8 MB free (program memory) here
-this is stable and has all apps I like *my favourite* (also has flash-disk)
EFN 2.4 OS 19588 (19900'3), 27.4 MB free here
-seems stable, need to add few apps (eg, TCMD, TCPMP), but has VC - keeping my eye on this! (more of want than need as I don't get 3G at home!)
rDosti 9 OS 19188 (19174), >33.9 MB free here
-seems stable, vanilla so need to add all apps you want (incl. Word, Excel, .NET etc). Built on my old favourite ROM from thingonaspring (below) - but with same problem. Can't get Blade (BT headset) to work
PDAVIET 2.61 OS 19949, 28.6 MB free here
-hangs occasionally, couldn't change alarms
-not a rom cooker on this forum, so feedback is useless from here!
Mo3ulla 1.5 OS 19588, 26.97 MB free here
-seems stable, but was disappointed with free program mem
Thingonaspring 41.28 OS 19188 (19174), 29.8 MB free here
-stable, excellent free memory, settings/buttons had no lock or backlight, some components getting old (TCMD) - has real VGA (if you like that sort of thing!)
-seems to have stopped cooking any more universal rom's - anyone heard from thing?
JWRights here
-no information, except was slow in dealing my cards in Patiences game
Beasty&Laurentius 2.08.01 Business here
-they also have newer test version and older FullFlavour/Vanilla versions, and were my favorite cookers
-beasty still pops back to help, and may produce newer rom, but has gone on to some wierd htc machineAdvice: pick your ROM(s), and help the cookers sort out bugs & features by encouraging them - and they can use this information with others too.
Hope this helps someone
great
thanks jonmorgan for your effort and views. come on guys more overviews will help our good rom cookers to improve their cooking by giving out your reviews of their great and effortfull work..
My vote goes for....
Ranju´s v7.6 & v7.7 definetly!
Cheers!
Ranju's 7.6 here!
Using Tomals 7.7 I must say, eaven after testing some others...
This is the best.
Its stable, fast, i love flashdisk and storage space
for this poll i Vote for Tomal/Ranju 7.7
JonMorgan said:
ROM really depends on your needs . If the cook has put in the apps you use, go for his rom. Otherwise it takes up more space adding your own apps - or alternatively go for rDosti/B&L vanilla and add all your own.
The free memory is important to me (being a 64MB Uni owner!!), and I have recorded the free memory on a clean install with no SD card in.
I want working camera, TCMD TCPMP and Route66N7 to work properly (which likes its memory!). I don't use wkTask, but prefer QuickMenu or currently playing with Battery Status (but after making own theme with weather, this took up too much program memory, and although looked nice I decided that I needed functional and not eye candy!). Fast is also good . I also need my Blade BT headset to work with my BT GRPS mouse.
My observations (in no particular order):
rDosti 9 OS 19188 (19174), >33.9MB free here
-seems stable, vanilla so need to add all apps you want (incl. Word, Excel, .NET etc). Built on my old favourite ROM from thingonaspring (below) - but with same problem. Can't get Blade (BT headset) to work
Click to expand...
Click to collapse
--- Did you try 9.1 (it has extra support for BT mouse and other BT devices. I would suggest trying that and then letting me know if it doesnt work with your Blade... I believe 9.1 should fix that (the main reason i released it).
Regards
great replies guys
man you guys are great keep on helping our friends, the genius rom cookers for their hard work thank you cookers without you all we could never make the universal the way it is today. thanks all guys for their overviews.
Ranju´s v7.6 & v7.7 definetly!
Ranju/Tomal is the best!!!
JonMorgan said:
Mo3ulla 1.5 OS 19588, 23.2MB free here
-seems stable, but was disappointed with free program mem
Click to expand...
Click to collapse
That's one of the fastest roms or may be the FASTEST rom ever created for the Uni, and no, the free program memory after reboot is 26-27+ MB with some programs in start up on 64 MB Universal! You guys don't write some stuff before test it
Greets,
Win_XP said:
That's one of the fastest roms or may be the FASTEST rom ever created for the Uni, and no, the free program memory after reboot is 26-27+ MB with some programs in start up on 64 MB Universal! You guys don't write some stuff before test it
Greets,
Click to expand...
Click to collapse
Yes, I can also confirm this rom is THE FASTEST so far for universal, it is very stable and was the only rom that did not give me phone hang-ups, but because it is so vanilla I had a few issues getting some parts of phone to work...so had to switch back to 7.7 rom
Win_XP said:
That's one of the fastest roms or may be the FASTEST rom ever created for the Uni, and no, the free program memory after reboot is 26-27+ MB with some programs in start up on 64 MB Universal! You guys don't write some stuff before test it
Greets,
Click to expand...
Click to collapse
Sorry, I did test it. I have now re-flashed and can report it to be 26.97 (I have edited my post).
This is strange - the total is only 46.27, where-as other ROM flashers are getting their totals much higher. I wonder if Mo3ulla got this higher, the free program memory would also go up.
I don't know how to test speed, except if my card game goes slow
Tomal is the best
I also have flashed tomal ranju's 7.7 rom and its really col and stable but what i noticed is it drains my battery very much is this normal or have i done something wrong?
anyways ranju 7.7 is the best for me.
and guys keep up the great work
Well, Ran's 7.7 is the one I like the most now as he provides me the apps I need. No wasting time to install , just up rom and use. I'm looking forward to the official release of version 8.0 from Tomal. Stable, no irritating problems though there're small problems with my EXEC, not sure whether those happen to other universals.
Cheers!
wm5
im going back to the wm5 aku3.5
my prblem is solved in sdhc driver. damn it it was sdbus.dll and sdmemory.dll after all.
ryt now im sticking on video call my uni is lame w/o it.
for cooked ROM probably ranju 7.7
but i got all apps for wm6 the contol panel thing so i used rdosti clean ROM v5-v10
ill wait rdosti v15 it could be 64mb free of RAM i think. joke
nice looking:
pamquang diamond rom
cons: freezes, call slow response. sometimes shutdown automatically..
efn video call- it didnt work on mine
rdosti - lots of memory free but apps its up to you spot wer the good version is because my opera 9.5 build 405 not run on v9.1..
hey anybody cud share a files/hacks to run opera 9.5 on wm5.
Pdaviet 2.61 Os 19949
PDAVIET 2.61 OS 19949, 28.6 MB free here
Try it you ll love it
salehjs said:
PDAVIET 2.61 OS 19949, 28.6 MB free here
Try it you ll love it
Click to expand...
Click to collapse
That's the main point! Most people didn't try all ROMs and therefore their oppinion isn't accurate...
I've tried all, except rDosti v10 and my favorite are rDosti v9.1 (I don't use because we can't install VCall out cab) (probably the fastest) and PDAVIET 2.61 OS 19949 (the 2nd fastest ROM)!
PS: I don't have problems to set the alarm on PDAVIET's ROM!
Ranju 7.7 .......
Tried Darkforce, mu3ulla and rDosti.
rDosti is my favourite, because
- his ongoing support
- quick problem solving with new ROM
- a lot of free program memory
Only things I miss at the moment:
- Flash disk (where is it? What is it?)
- good BT support (Please leave BT enabled when connection to my GPS!)
But, hey, he's posting a new ROM every day, so maybe next week?
Hello everyone, I've been searching all these roms but it seems that there isn't one single ROM with manilla. Can I install this on Universal? Tks
Short answer? No.
Long answer? Manilla (aka TouchFlow 3D) requires far too much RAM and processing resources to run properly on our Uni's. The biggest problem is (seems to be?) the lack of decent hardware drivers, since HTC wrote custom ones for the TouchPro, etc.
Of course it's a few months since I even attempted using any of the ports, so things may have changed, though I somehow doubt it.
-PJC
pjc007 said:
Short answer? No.
Long answer? Manilla (aka TouchFlow 3D) requires far too much RAM and processing resources to run properly on our Uni's. The biggest problem is (seems to be?) the lack of decent hardware drivers, since HTC wrote custom ones for the TouchPro, etc.
Of course it's a few months since I even attempted using any of the ports, so things may have changed, though I somehow doubt it.
-PJC
Click to expand...
Click to collapse
But what about the 2D version?
I had one in my qtek 9090 (which is older than uni) and it ran just fine!
u can use this big-mem ROM by Cotulla: http://forum.xda-developers.com/showthread.php?t=468776 and install manila2d .. but if u have 64Mb uni, u will be memory low for something more with manila (i got 15-10Mb free with my 64Mb-Uni) .. its work very nice in portal mode.. and its so big, great for in-car use or similar
after install of manila, they will be small, not on full screen.. you must find VGA theme for manila2d .. search on forum
this is easy for install, ask if is problem find .. i think that on 128Mb uni it is will work very nice
//sorry for bad eng, big hello from Serbia
I would recommend to use ThrottleLauncher (just Google for it).
With the TF3D theme and with the Manila WeatherPanel installed it is great and fast (10-15 MB RAM, yes I know, but with a 128 MB Uni it's awesome ). But if you turn on the flash clock you will see, how many resources it needs, and it works only with 2-3 fps. But at least it is very customizable...
That's it,
DOMy
Hey Guys,
I know that this has been discussed a hundred times .
But let me at first explain:
This goes out to all you chefs which are cooking the roms (I'm not capable to cook one by myself)
So what I would like to have is a Kaiser ROM with a working Touchflo3d.
I've read and searched for hours and hours and found the rom from L26, but I think this had been an really early state. Now the drivers have changed and improved.
So is there anyone out there who is able to cook a rom (no matter if 6.1 or 6.5) with working TF3D and drivers?
I found out that there is a working version in this tread: http://forum.xda-developers.com/showthread.php?t=465507
But it was not working with my rom (M-Opal 1.0) due to cooked M2D.
So it would give hmm a bounty of 35€ (€ not dollars) if anyone would prepare a working, fast rom with TF3D.
And I am also sure that there will be a lot of other useres who would love it.
Best regards,
Matthias
Maeffjus said:
And I am also sure that there will be a lot of other useres who would love it.
Click to expand...
Click to collapse
Not me ...........................
That being said, here is the latest.
http://forum.xda-developers.com/showthread.php?t=458116
Maeffjus said:
Hey Guys,
I know that this has been discussed a hundred times .
But let me at first explain:
This goes out to all you chefs which are cooking the roms (I'm not capable to cook one by myself)
So what I would like to have is a Kaiser ROM with a working Touchflo3d.
I've read and searched for hours and hours and found the rom from L26, but I think this had been an really early state. Now the drivers have changed and improved.
So is there anyone out there who is able to cook a rom (no matter if 6.1 or 6.5) with working TF3D and drivers?
I found out that there is a working version in this tread: http://forum.xda-developers.com/showthread.php?t=465507
But it was not working with my rom (M-Opal 1.0) due to cooked M2D.
So it would give hmm a bounty of 35€ (€ not dollars) if anyone would prepare a working, fast rom with TF3D.
And I am also sure that there will be a lot of other useres who would love it.
Best regards,
Matthias
Click to expand...
Click to collapse
there are already tf3d roms and if your looking for one that will work flawlessly on our kaisers, not gonna happen.
Leo (L26) made a decent rom L26_KaiserTouch_V4_M3D that actually encompasses TF3d. I have not tried the others but I do love his rom even though it is not as smooth.
I wonder how it will work with 6.5 drivers. I'm going to take a shot at cooking it into josh's rom for you. We'll see how this goes.
Why should there be no interest in TF3D on a Kaiser? (@denco)
Because I've seen a lot of videos on Youtube where it is running smooth and it also seems nearly bugless.
Like this one: http://www.youtube.com/watch?v=wPf_gjMFBHs
or these one: http://www.youtube.com/watch?v=oDduRgWFweM&feature=related
What I want to fullfil my bounty should be:
1. Running TF3D
2. OpenGl-Drivers integrated in ROM (I think it is necessary to use TF3D)
3. The Standby bugfix should be integrated, which is located under the link in my first post.
4. Look and Feel like on the Videos (not any kind of "Tiger" or strange "Tribal" as system theme)
Optional but highly welcome: German Language
Or is it possible to install some kind of language pack? (I'm using WM since hmm 6 or 7 years but I've never seen such a thing)
I've tried the L26 ROM and it was not satifying to me because the speed was really low compared to the TF3D's on the youtube videos and it seemed very buggy.
If I'm not completely wrong, the version of TF3D from my first post is in an advanced state compared with the on from L26.
Thanks in Advance!
Would be nice to find some people who will help to increase the bounty!
Maeffjus said:
Why should there be no interest in TF3D on a Kaiser? (@denco)
Because I've seen a lot of videos on Youtube where it is running smooth and it also seems nearly bugless.
Like this one: http://www.youtube.com/watch?v=wPf_gjMFBHs
or these one: http://www.youtube.com/watch?v=oDduRgWFweM&feature=related
What I want to fullfil my bounty should be:
1. Running TF3D
2. OpenGl-Drivers integrated in ROM (I think it is necessary to use TF3D)
3. The Standby bugfix should be integrated, which is located under the link in my first post.
4. Look and Feel like on the Videos (not any kind of "Tiger" or strange "Tribal" as system theme)
Optional but highly welcome: German Language
Or is it possible to install some kind of language pack? (I'm using WM since hmm 6 or 7 years but I've never seen such a thing)
I've tried the L26 ROM and it was not satifying to me because the speed was really low compared to the TF3D's on the youtube videos and it seemed very buggy.
If I'm not completely wrong, the version of TF3D from my first post is in an advanced state compared with the on from L26.
Thanks in Advance!
Would be nice to find some people who will help to increase the bounty!
Click to expand...
Click to collapse
Yes it can run smoothely'ish the problem encountered is lack of driver to be able to sleep device in the correct manor.
But there is a patch to solve that kind of problem or am I wrong?
Q: Whenever I try and put the device into sleep mode, it powers off instead?
A: Try disabling the today time-out. Also, make sure you installed the standby CAB right.
Click to expand...
Click to collapse
Taken from the Linked TF3D thread...
Maeffjus said:
But there is a patch to solve that kind of problem or am I wrong?
Taken from the Linked TF3D thread...
Click to expand...
Click to collapse
No there are work arounds but no real fix
Im still TF3D fan, but after many bug and slow on my Kaiser, i have to move on.. if somebody create or develop ROM with it, i will give a try..
With that standby fix Touchflo3d is disabled automatically before sleep mode. Biggest problem for me was that when the device wakes up it needs to launch touchflo again and that process was kinda slow. Sometimes it just get stuck and needed softreset.
Still, I would be curious to see how smooth tf3d would be cooked in with newest builds and drivers...Also, if I remember right 3d drivers won't work if you have super ram hack in your rom.
Whatever ;-) ...
Also, if I remember right 3d drivers won't work if you have super ram hack in your rom.
Click to expand...
Click to collapse
I don't mind if there is a super-ram-hack or what else, in my opinion it should WORK
Also I think that all of you shall take a look in your money-bag if there is a possibility to make it a little more lucrative to work on such a rom.
As I also stated out that I will pay my full bounty only if it is able to run on latetest state of development - that means not that the chef has to develop touchflo3d once again but without bugs ;-) it means only that it should be able to run as good as possible at the moment.
But as I read yesterday evening, I saw that there are maybe two possibilities to get rid of the standby bug, but - forgive me - if did not looked detailed at these solutions - so I don't know how these work but maybe one of them is working better?
And when I'm right - all the roms with TF3D cooked in are with an earlier driver-version. The younger versions of the driver have improved, if I understood the development news made in the dev. and hack. section.
The TF3D-cooked-in-rom-threads are nearly all dated arround december '08 - and I read a lot of them
Maeffjus said:
Why should there be no interest in TF3D on a Kaiser? (@denco)
Click to expand...
Click to collapse
I am not saying that if you posted a working TF3d rom that no one would flash it, I would. But what is the effort /reward ?
What about it would make it better than my M2D rom ? Or anyone's 6.5 rom.
Enough great chefs put more than enough time into it, and could not get adequate drivers to make it smooth enough to keep as an everyday rom nor could they get by the stand by problem.
TF3D is M2D with some nice 3D touches that is all, am I missing something ? Is it head and shoulders above M2D or Neo Titanium, I don't think so. Which is why no one really cares to put in all the effort to make it work , nor is anyone really willing to spend any funds to make it work.
I am not being a contrarian or a nay sayer just for arguement sake, really With M$ coming out with cHome and Titanium, SPB out with MS 3, HTC coming out with Sense, there is a reason why people took porting TF3D as far as they could and then lost interest.
O.K. 0,5 Points for you
But I think that Sense is only for Andoid? Correct me if I'm doing wrong...
My problem is, that my Kaiser (and i think all others too) have not such a good touch screen accuracy... mine is terrible.
(yes, I cleaned out the frame and the edges...but on my bosses Kaiser the screen accuracy is also bad! - Compared to my - slow but accurate - P4350).
In my opinion the touchflo concept is one of the best solutions ever developed. But for me in person TF3D would be a nice looking (and little improved) upgrade. I'm already using M2D and I like it, but what I also like very much is for example the animated weather and the improved look and feel.
I have also tried 6.5 but with the terrible accuracy of my screen it is not so funny to use.. also it is not running such smooth as M2D and I in person think titanium is not everyones favourite choice. What i also do not like is the Honeycomb-Style... looks nice, but thats all.. O.k. the kinetic scrolling is good and thats one thing I like . But thats the only improvement I could see at WM6.5.
So whats your opinion: Is a rom with newest drivers and so on not for everydays use capable due to a lot of buggy functions? (I dont't know - I never used one ).
If I remember right, all the legendary cooks have tired TF3D and it doesnt work as it is supposed in Kaiser. Kaiser is just not made for TF3D. TF3D is more resource hungry, and our device just cant handle it.
I do believe there is a cab for TF3D available! Take a good lite 6.5 ROM with memory hack, and load it with TF3D, you will see if it will be able to handle it or not.
I had it working kinda decent with 6.5...just kept throwing drivers at it until i found a decent setup. But i was just wanting to see how it would be like you. When i get home i will look if i still have the file and send it to you. I cant even remember what all i had with it though lol. But like everyone has said its still slow with the newest drivers and such.
I cant find the file....but i will work on it this weekend.
Here is one that I had downloaded when the TF3D thread was alive. This does not have standby in it. So if you want to turn off your phone, then you need to find a stanby fix by somebody!
Hmm in my first post is another source for the TF3D, which has bigger files - there you'll find also the Audio Manager etc.
Has this thread died ?
Wich one is better ? More stable ? I read some comments here and there, spend some time googling it, and lots of ppl says that 3.03 version is more stable and got more functionality, is that true ?. Anyway can i run wm6 applications and games on that cotulla rom ? I mean is this rom changes a lot, or this is just some kind of visulization ?
I dunno if the 3.03 is more or less stable then the 3.04, as I have used them bothe for too litle time now to make a comparison. But what I can say is that these ROM's change a lot. I use a couple of WM5/6 only programs on these and all that I tryed do in fact run perfectly, on bothe ROM's. I dunno if that is true for all WM6 software around, but for those I use these ROM's worked like I charm!
1- After a lot practical experince with both 3.03 and 3.04, I can say definitely 3.03 is more stable in various ways. If you'll introduce your device with WM6.1 for the first time, I advice you to choose 3.03, you won't regret it. Anyway, there isn't much differences between them, they are both the same ROMs but the latter one has some ins and outs from the first one (3.03).
2- Yes, after upgrading to Cotulla's 3.03 ROM, you will be able to use any application suitable for WM6.1 (of course usage of some programs can depend on other extra applications such as macromedia, windows frame work etc). Since it's not theme or visualisation, it's pure and real WM6.1.
in reality there big differences between 3.03 and 3.04...
about the best version... everybody have own opinion.
but I will suggest u to install the last one, if u want help me with project
i like 3.04 better.
it seems faster and is over-clockable. (with extra cooling)
blue tooth is better (not turning off as much)
i still run 3.03 on my second xda, and must reset it each and every day. (problems vary but reset and it goes away)
the sound quality is an issue with all three roms. it may have something to do with the radio rom. (1.12)
also have issue with mms/data or internet. can not use wap.
thank you all
3.03 has camera support, 3.04 no..