I have a new issue with my backlight. I didn't really see anything scanning a search on backlight so I'm hoping someone has seen this before and can help.
I just got a new 3200mah battery. Ever since I started using it, after turning off the device, I go back to it, press the power button or backlight button and while the screen itself comes on, the backlight does not. No light at all. I also often find that the screen is on already when I open the phone (which might explain why my battery is sometimes finding itself dead in a matter of a couple hours).
Please, if you are familiar with this can you offer some direction?
Thanks
Wrong title on this thread
Ooops...sorry for the double post.
Related
Ok so I have a little problem with my HTC Diamond. In options I set to turn-off the backlight after 10s of inactivity which is standard. The problem is that after those 10s I can see that the screen backlight is fading out but it doesn't fade out completly - if you look from an angle it might appear that it's off but if you look at the front of the phone or simply in the dark you can see that the backlight is still on only set to something near 10 or 5%. As you know the battery just sucks in this device and I don't want the backlight to drain it so any ideas or tips on this matter? Of course I can put the phone to sleep mode but I'd just prefer to make the backlight turning off so I can take a look at the screen to for example check the time without having to press any buttons...
Same problem here
After those 10s the screen is not turning off completly, just fading to 5, 10 %. The screen with all the info, the home page let us say, is still visible and drains the battery. I also could just press the power button to turn is completly off, but I would also prefer it to do this manually after ten second.
Did you find a solution to this problem yet?
Help Battery Drain
Same thing here, and my Backlight is stuck to 100% i think,
anyone found a solution to this? any hints?
Guys, i assume youve set the "turn off device if not used for xxx mins" correctly whilst in battery and external power correctly?
If you have, what roms are you using as you give us no information to help any further
Hello,
I had the same problem with ROM 2.03.421.2, date 12/24/08.Back then I had SPB mobile shell installed and a very few applications and I couldn't find the problem. I made a hard reset so now, with nothing installed, the device also enters standby. You should take care because it is possible that the device is not entering standby either and it is making calls. When I had this problem my friends were complaining that I kept calling them and not talking. It is strange as I'm sure I put the device to sleep with the power button. But still, somehow, it was making calls...
Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
Hello
I'm new here and still using the stock rom on my polaris
But lately, i'm having some strange problem: i lock normaly the device and press the power button (once and quickly) to shutdown the light on the screen (but keeping it working), to put it in my pocket. but sometimes, after like 1 or 2 hours, the device completely shuts down. but with no reason at all to do that...
my question is: something not correctly configured? some hardware problem? software problem?
i've serched the definitions menu & sub-menus and found nothing point to wrong configuration. (in menu: start>definitions>System>power>advanced i unchecked all the fields)
I've searched google and here and haven't found anyone with the same problem...
Does anyone here have an idea of what may be causing this?
thanks in advance for your help guys
Happened to me few times.
But I guess this happened to me: I have shut screen and put Polaris in a pocket.
Somehow I pressed Power for a longer period, and phone understood it has to shut down. Accordingly, it wrote question on display with Y/N buttons... and accidentally I pressed Yes.
Mind you, all the time Polaris is in the pocket...
This might not be what's happening to you...
yes, like you, my polaris spends most time in the pocket.
but i never saw the Y/N question on the display.....
Hi there,
I have been struggling with a problem the last few days, and have been reading quiet a lot. I got two old Nexus 5 phones, one had a broken screen, the other one had the display glitching problem - related to the flex cable. So I opened them and put a working one together out of both.
So far so good, everything seems to be working, with one exception: Once I press the power button, the screen goes black like its supposed to. If I wait long enough and try to wake the phone, its not responding. The only thing that helps is long-pressing the power button to hard reboot it.
So I did read a lot, about the power button malfunctioning and the batteries dying on the Nexus 5. I ruled out the power button problem and its working like it should. I ordered a new battery, which is not perfect, but has an estimated of 1800 mAh. I monitored the voltage of the battery with different apps, even logging them to see what happens right before the shutdown - but everything seems normal. So this could not be the problem either.
I am currently running the latest LineageOS, but I experienced the same problem running the latest factory image google released for the phone. I even tried different kernels. So I thought, it might not be software related. But since it always happened when the phone starts to enter the deep sleep , I tried to google some about this and found the SOD ( Sleep of Death ) problem for the Nexus 4. Since I was out of ideas, I installed an App called "SOD Killer", which creates a wake lock preventing the device from sleeping. Et voila - the problem is gone.
I could not find discussion on the internet relating to the nexus 5 concerning the sleep mode and the phone dying once it goes to sleep. Am I missing something here? The SOD Killer wake lock solution is a good temporary fix, but I would like to get to the grounds of this.
Does anyone have an idea what could be causing this strange behavior? Thank you in advance,
joha
What I forgot to mention is that once the phone is connected to a power source, the problem does not appear. That is also the reason why I wont get any logs via adb. ;p
I will try to get some logs with an APP and root once I get home - maybe there is some information about the problem causing this strange behavior.
I managed to get a log while the phone died when it wanted to activate sleep mode. But I am not that good in figuring out what in the log might be pointing in the direction of the failure. Any ideas?
I dont like the
Code:
09-21 12:11:51.977 E/BatteryStatsService( 786): no controller energy info supplied
parts in there. What might be the problem here?
Thank you so much in advance!
Does no one have any idea? I guess its hardware related somehow, when the phone tries to enter deep sleep. Anybody out there that knows, what the phone is actually doing when entering deep sleep which might be causing it to die / become unresponsive? Any idea is highly appreciated - I love that phone.
I've gotten no help from ZTE themselves - they want me to do a factory reset and didn't even bother to read what my problem is. This is with the stock ROM for a ZTE Blade 10. I touch the power button and the screen doesn't stay off, instead turning on every time I move it (in the same vein as a "Lift to Wake" problem). This burned a huge hole in my battery the first day I had it, butt dialed a couple of people by opening my Contacts on its own, swiped important notifications away (including texts and reminders), and played with apps. I've managed to stabilize it some by tweaking some settings, but I haven't found a setting that disables this entirely.
I have screenshots of my settings in a second post, since I'm not allowed to post them in the original post.
Worth noting is that I have a custom lockscreen app, HiLocker, for which I set a five-second timeout. It does not seem to be the app, since the problem still presents itself when I disable it. Ergo, I either have to choose between changing that to instantly locking (thus making me enter my pattern again when my screen times out, even if I'm in the middle of using the phone) or keeping as is and dealing with this problem. I don't want this to be a choice. I want this five-second thing, but I want the power button to be absolute and keep the screen off until I push it again. My phone doesn't seem to understand something so basic: That's what the power button is for.
Does anyone know if there's a solution for this? Any pointers would be appreciated, thanks!
I hope this works.
https://i.imgur.com/uwdn8V5.png
https://i.imgur.com/aqd16Ko.png
https://i.imgur.com/RuhrvAV.jpg
Bump. Seems I can do that every 24 hours, and it's on the bottom of the page, so...
Still seeking any feedback. Anyone have any idea, or do I need to flash a ROM for the first time in half a decade?
One last try... can anyone help me?