Hi,
I lost the function of my disconnect or hang up button, the red hardware one on the side of the device.
Does anybody knows the registry entry for this button.
I do have HKLM\Software\oem\Keys but i think there is not this one.
The key just does nothing anymore, the green one works fine.
Thanks for helping,
Thomas
may be its a hardware screwup... did u drop ur exec ??
its allright again...
To my shame, I did not push strong enough several times... It works but needs to be pushed strongly. After breakfast it was much easier ;-)
So thanks, but IT WORKS!!
If I would know how to close a thread I would do so...
Thought my button was spoint too, but didn't push hard enough too.
Glad you manage to solve the problem, with some "energy". haha.
me, too...
Thomas said:
Hi,
I lost the function of my disconnect or hang up button, the red hardware one on the side of the device.
Does anybody knows the registry entry for this button.
I do have HKLM\Software\oem\Keys but i think there is not this one.
The key just does nothing anymore, the green one works fine.
Thanks for helping,
Thomas
Click to expand...
Click to collapse
Recently i am facing similar problem.Anyone know how to set this right. The red button just doenot disconnect a call or close the dialpad.
Have same problem. Touch screen button works, but hardware not. only reflashing cures the problem for me....
Not all Roms fail here thou
Optika said:
Have same problem. Touch screen button works, but hardware not. only reflashing cures the problem for me....
Not all Roms fail here thou
Click to expand...
Click to collapse
I think there is a registry tweak but i am unable to find it.
all it needs is a restart!
this happens to my device sometimes that one of both of the keys stop functioning... they get fine after having a restart...
aniel1 said:
Recently i am facing similar problem.Anyone know how to set this right. The red button just doenot disconnect a call or close the dialpad.
Click to expand...
Click to collapse
Related
I installed several programs on my Cruise and unfortunately the device cannot be turned off anymore.
If I hold the button on top of the device and hold it, you get the message that you are turning the device off....but it puts it in hibernate....
I don't really know which program caused the problem, since I seldom turn my phone off. So in the 2 weeks I have the phone, I tried to turn it off only once.
In the beginning the button worked...but now...not anymore.
I know I can try a hard reset, but I am reluctant...since I have to install everything again.
The software I installed were:
SBSH PocketBreeze (uninstalled it)
PZP tools (uninstalled it)
BatteryStatus Advanced
SPB Diary
HTC Home Customizer
At least these are the programs of which I think could have caused the problem.
Does anybody know how to correct this, without hardresetting?
Same situation for me .....
Maybe HTC HomeCustomizer ???
you can try soft reseting the device with the stylus and see once it is back on if the problem persists. then u might want to try uninstalling the last application u installed to see if it makes a difference.
Jackster said:
you can try soft reseting the device with the stylus and see once it is back on if the problem persists. then u might want to try uninstalling the last application u installed to see if it makes a difference.
Click to expand...
Click to collapse
I did it but with no relevant results, now i am going to hard resetting it....
Anyway thanks for the suggest.
ERIC.67 said:
I did it but with no relevant results, now i am going to hard resetting it....
Anyway thanks for the suggest.
Click to expand...
Click to collapse
I have used HTC Home Customizer and do not have this problem. Have you tried a short double press of the power button? Sounds like the long press power off works by your descriptions. You may also want to check if xpshut will work for you.
raskell said:
I have used HTC Home Customizer and do not have this problem. Have you tried a short double press of the power button? Sounds like the long press power off works by your descriptions. You may also want to check if xpshut will work for you.
Click to expand...
Click to collapse
I tried xpshut also with no results, now after hardresetting seems it's all ok. If the situation will repeat i'll write it in this thread, thanks mates
Problem seems to be resolved
The problem seems to be HTCHome v2.1 necessary for HHCustomizer to work. I installed it and i'm not able to turn off the device, after uninstalled it's all ok.
At least there is someone to share this inconvenience. Glad to hear you found out what caused it....however, does your Home Customizer still work?
foske said:
At least there is someone to share this inconvenience. Glad to hear you found out what caused it....however, does your Home Customizer still work?
Click to expand...
Click to collapse
No, it doesn't work without HTCHome v2.1
Keypad service
There's also a service, keypad, that if stopped, disables all buttons. Not sure if this applies to you or not, but I had stopped it on my TC by accident, and had the same issue you described.
Dave
dfields said:
There's also a service, keypad, that if stopped, disables all buttons. Not sure if this applies to you or not, but I had stopped it on my TC by accident, and had the same issue you described.
Dave
Click to expand...
Click to collapse
I didn't verified it, probably was the same for my device. I have Italian ROM on it and you ???
bye,
eric.67
ERIC.67 said:
I didn't verified it, probably was the same for my device. I have Italian ROM on it and you ???
bye,
eric.67
Click to expand...
Click to collapse
UK WWE ROM
Hey, I've got a weird problem, my Fuze won't turn on once it fades after not using it. I've tried to press all the buttons and it won't work, I have to physically slide the qwerty keyboard out in order to make my screen reappear again. Does anyone else have this issue and is there a resolution?
I have a flashed Fuze with the TiR v8R WWE ROM on it
kinda obvious, but have you tried the power button at the top?
dukemen said:
Hey, I've got a weird problem, my Fuze won't turn on once it fades after not using it. I've tried to press all the buttons and it won't work, I have to physically slide the qwerty keyboard out in order to make my screen reappear again. Does anyone else have this issue and is there a resolution?
I have a flashed Fuze with the TiR v8R WWE ROM on it
Click to expand...
Click to collapse
I've seen the same thing on the TP (European, stock WWE) that I'm testing. No matter what button you press, the unit will not 'wake up'. I hadn't tried sliding the keyboard -- I'd just automatically reached for the stylus to press the Soft Reset, which got it going again.
Apparently, there's another whole thread of other people with this problem.
http://forum.xda-developers.com/showthread.php?t=425709
Brendo said:
kinda obvious, but have you tried the power button at the top?
Click to expand...
Click to collapse
Yes, actually, that wakes it up as well, but it is very annoying to have to press the power button every single time I want to check my phone. I thought, being a touch phone, that a simple fingertouch would awaken it. I can receive calls but the screen won't turn on so I have no clue who is calling. Could it be a radio issue? Would installing another radio help? This is bugging me to no end
I'm still having this problem anyone have any ideas
After a soft-reset, the right button on the scroll wheel is simply not responding at all. I can still press left, up, down, and turn it both ways and it responds normally - but the right button is doing nothing.
I've tried many soft-resets, and I don't see how on earth a hard reset could help this at all, unless it really is some random registry entry that somehow got messed up.
I thought I'd ask here in case anyone knows of some obscure registry issue that could have caused this somehow. Otherwise, I guess I just have to accept the fact that I'll never again be able to use the right scroll wheel button.
Any suggestions or experiences with this? Or, if not, can anyone just tell me where to find this in the registry so I can check it myself?
Thanks, in advance.
I have the very same problem, right button not responds even if i boot android with haret.
Please help!
Should i take apart and clean, or what else?
Thanks!
I have the similar problem, d-pad left button almost dosent work.
I mast push it very hard to make it work.
I think it's a hardware problem.
any idea to fix this problem without changing another d-pad?
Hi,
I have the same problem, too. The right button from d-pad doesn't work. Since the button stopped working, I've tried more than one or two different ROMs. The result is the same.So all that means the problem isnt in the software. I think its hardware malfunction. I use this phone more than 3 years. May be its more than enough yo use it. I think your phones need nothing but repair
Hi I recently got a chacha from a friend and certain keys don't work as intended like
pressing d gives me five and the back button makes question marks.
The key still work so I'm wondering if there is a hardware calibration tool
For the keyboard, I have tried resetting the phone and they are still messed up.
Thanks!
killerkarp386 said:
Hi I recently got a chacha from a friend and certain keys don't work as intended like
pressing d gives me five and the back button makes question marks.
The key still work so I'm wondering if there is a hardware calibration tool
For the keyboard, I have tried resetting the phone and they are still messed up.
Thanks!
Click to expand...
Click to collapse
I also have this problem, but only when I have the phone in my pants, and creates moisture in the keyboard, especially in summer.
I brought the phone to help with a problem with the green and red buttons. Them I have fixed the problem, I have recalibrated the phone, but the problem of crazy keyboard will occur.
Thanks for reply but..
Thanks for reply but the think is the problem is not disappearing and I cannot login into google and other services because of the keyboard.
The phone has probably been dropped many times so i think its a hardware problem hence recalibrating the keys to what they should be doing may help. I have tried button mapper and tools like that but it requires root access or limited funtionlity
Hi,
Sometimes, my power button will not put the phone to sleep... Other times, it works perfectly...
It is not a hardware problem, as when this happens, I can ALWAYS hold it and see the shutdown/reboot menu. Then, after dismissing the menu, I can ALWAYS put the phone to sleep using the button. It's like if the key was ignored when that happens.
By the way, double tapping the status bar works all the time to put the device to sleep.
I think it is a software problem.
Unfortunately, I cannot always make it happen, as my button works probably 90% of the time...
Anybody got this ?
not had this issue with the phone. might be faulty hardware
harrys1991 said:
not had this issue with the phone. might be faulty hardware
Click to expand...
Click to collapse
I don't think it's a hardware problem, because it alwas work to open the screen.
I was able to catch a logcat and I opened a jira for it :
https://jira.cyanogenmod.org/browse/BACON-1344
Hope somebody can find what is the problem.
My jira was merged :
https://jira.cyanogenmod.org/browse/BACON-837
Anybody else have this problem ?
My volume and power button's both are not working as of yesterday . They worked fine after 38R update , but started to have this issue for no reason .
Luckily I had the double Tap to wake up selected and so am able to access the phone.
I too get something similar but it's to wake up the screen for me that works 1/2 the time. Also double taping to wake up is pretty bad since 38R.
Cholerabob said:
I too get something similar but it's to wake up the screen for me that works 1/2 the time. Also double taping to wake up is pretty bad since 38R.
Click to expand...
Click to collapse
I have the exact same problem my self. It is extremely annoying! I can't find a way to fix that. I tried numerous different roms with no luck. Unfortunately i can't find anyone else in the internet having the same issue. It seems it is just you and me at the moment. The only work around is using dt2w which always works but the problem with dt2w many times unlocks the phone without wanting to.
I hope some experienced people here have a look on this problem!!
Please vote on jira.cyanogenmod.org to get some attention to this issue.
dcoulombe said:
Please vote on jira.cyanogenmod.org to get some attention to this issue.
Click to expand...
Click to collapse
Already did. Let's hope they will try ti fix it.
me too
dima22 said:
I have the exact same problem my self. It is extremely annoying! I can't find a way to fix that. I tried numerous different roms with no luck. Unfortunately i can't find anyone else in the internet having the same issue. It seems it is just you and me at the moment. The only work around is using dt2w which always works but the problem with dt2w many times unlocks the phone without wanting to.
I hope some experienced people here have a look on this problem!!
Click to expand...
Click to collapse
let me know how you could resolve the issue my screen is not getting on while outgoing call is active, power button doesn't wake the screen most of the times
I have the same problem, sometimes work sometimes not. I am using cm12, and before that i used cataclyzm mode with same problem.
Button worked fine on kit kat.
What should we do?
Has anyone found a solution to this problem ?
It's rather strange
Everything worked normally on CM11S, it also works for some time after a reboot and power on does work , just power off doesnt :/
MAy be I have a solution
nerellav said:
let me know how you could resolve the issue my screen is not getting on while outgoing call is active, power button doesn't wake the screen most of the times
Click to expand...
Click to collapse
Go to Settings-Display- Go down and u will find an option Prevent Acciental wake up- Just uncheck it.
Hopefully ur problem will be solved