Hey, I've got a weird problem, my Fuze won't turn on once it fades after not using it. I've tried to press all the buttons and it won't work, I have to physically slide the qwerty keyboard out in order to make my screen reappear again. Does anyone else have this issue and is there a resolution?
I have a flashed Fuze with the TiR v8R WWE ROM on it
kinda obvious, but have you tried the power button at the top?
dukemen said:
Hey, I've got a weird problem, my Fuze won't turn on once it fades after not using it. I've tried to press all the buttons and it won't work, I have to physically slide the qwerty keyboard out in order to make my screen reappear again. Does anyone else have this issue and is there a resolution?
I have a flashed Fuze with the TiR v8R WWE ROM on it
Click to expand...
Click to collapse
I've seen the same thing on the TP (European, stock WWE) that I'm testing. No matter what button you press, the unit will not 'wake up'. I hadn't tried sliding the keyboard -- I'd just automatically reached for the stylus to press the Soft Reset, which got it going again.
Apparently, there's another whole thread of other people with this problem.
http://forum.xda-developers.com/showthread.php?t=425709
Brendo said:
kinda obvious, but have you tried the power button at the top?
Click to expand...
Click to collapse
Yes, actually, that wakes it up as well, but it is very annoying to have to press the power button every single time I want to check my phone. I thought, being a touch phone, that a simple fingertouch would awaken it. I can receive calls but the screen won't turn on so I have no clue who is calling. Could it be a radio issue? Would installing another radio help? This is bugging me to no end
I'm still having this problem anyone have any ideas
Related
Hi,
I've got a problem with my Trinity, where if it rings and I pull it out of my pocket, sometimes one of the buttons gets pushed as it rubs past the material, so either the call can be hung up on or it gets answered before I can see who's calling.
I also get a similar problem if a calendar alarm goes off, or if there is a text message. Sometimes these can be dismissed before I get a chance to see what is causing the notification.
I guess this is a problem on many PPC phones which dont have a cover. Does anyone else experience this?
Does anyone know of any way to solve this? Perhaps having a secondary lock button which needs to be pressed before the hard buttons become active or something like that...?
I guess it would need some software installed, as I havent found any way to do this through the normal settings.
Thanks for any suggestions!
Cheers,
Ben
My Jasjam comes with a screen lock. Once this is activated you first need to press the unlock button which gets assigned to the left soft key followed by another button on the screen. Quite effective I would say.
Regards
srmz said:
My Jasjam comes with a screen lock. Once this is activated you first need to press the unlock button which gets assigned to the left soft key followed by another button on the screen. Quite effective I would say.
Regards
Click to expand...
Click to collapse
Hi,
Is this the same as the "Device Lock"?
My phone has this too, but it doesn't work for when there is an incoming call...ie you dont have to unlock the phone first to press the green "handset" button.
Ben
Hi Ben,
I have been having the same issue as you with my Jasjam. I tried using a hard case which was just too bulky and annoying, so I've since used something like those iPod socks and just keep it in my pocket. I just take extra care when pulling it out so it doesn't knock the green answer key. I think this is just something we're just going to have to get used to unfortunately.
Greetings,
I just upgraded to the 2.02.00 ROM last night but still have the occassional lockups. I need to do a soft reboot to get the phone to respond. I believe when it locks up, the radio is still running since I see the blinking Green LED for the GSM. I have to switch off the POWER MANAGEMENT option of "Turn off in x min in not used" for battery power to be able to use the device for calls. The only level of battery saving I am stuck with now is the Backlight auto-off and the beam settings.
Is this something others are having as well or are any applications the culprit?
Thanks in advance for your assistance.
Regards
BHAMEED
------------------------------------------------------------------------
I-Mate JASJAR
--------------
Windiws Mobile 6 (CROSSBOW)Jwright
OS 5.2.318 (Build 15341.0.0.0) AKU 0.0
CE ROM Version : (2.02.00 WWE)
RADIO Version : 1.13.00
ExtROM Version : (2.03.05 WWE) UNLOCKED
Bootloader Version : ver 2.01
Try the power button
All buttons..including the power button...no response.
try holding down the power button
or setting the backlight to atleast one notch.
Urm... uh... ah.... eeee... aaaaaaaaaaaahhhhhhhhhh.
I can confirm this behavior on my MDA Pro (G3).
All ROM versions the same like Bhameed's on my MDA, ...except bootloader of course.
Anyone else noticed this on 2.02.00?
Hold on, can you guys be more specific with this? Are you absolutely sure it doesn't come back on when you PRESS AND HOLD the power button??? Really sorry if I sound like I'm being pedantic, but just from what you've written it sounds like you don't know how to turn on the phone???
hahahaHAHAHA!!! awesome reply spyder
ok, yeah i was thinking this is an issue of not being able to turn on your phone.
yeah what's going on that was different from before?
There have been only few moments where you think "Surely not"... I hate those moments, I'm just hoping this isn't one of them! If it is a genuine problem it's pretty serious and needs to be addressed, but if not.... well, I don't think I should say much more
Please please please say this is all a big joke. I'm tired, please excuse me.
I confirm this behaviour!
And more!
My Qtek freezes... freezes... and then PUFFF. Dead.
I wait some minutes (30 minutes) and I can turn it on again.
I'll send it to qtek.
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
SpyderTracks said:
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
Click to expand...
Click to collapse
Mine freezes everywhere. Bootscreen, Pin code menu (when u type your pin). It depends.
then pda doesn't turn on.
Many problems.
Just go to the assistance. :\
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
aniel1 said:
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
Click to expand...
Click to collapse
Again, I don't have this problem for some reason... I get very few freezes at all.
I think we're getting away from the original point of the post though... and normal freezing is well documented in most OS threads with means to prevent it.
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Bhameed said:
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Click to expand...
Click to collapse
And then you don't have other problems? Like freezes?
EDIT: I flash the original rom but the problem still here
I wonder if this could be a memory leak like someone suggested.... I'm sorry guys, I haven't experienced this problem, and I haven't seen any posts about it until this thread, is there any chance you guys with this issue can keep an eye over your memory status over say a couple of days to see if there's a leek and keep us posted? Once we find out what the problem is it should make a solution easier.
I experienced this problem as well using a cooked WM5 ROM on my HERM200 the only fix I found was migrating to another ROM. I'm currently using CUSTEL_Cing_v1.3, the battery life sucks but I love WM6, it is so much faster, I'm still tweaking and trying to resolve some other issues but other than that I am quite happy with it.
If you are experiencing the lockup I would suggest moving to another ROM as an option, that worked for me. Although a clean install usually fixes a lot of problems.
Anyone have problems with the 4 hard keys on the front of the phone and the scroll wheel? Talking about the att fuze here. Randomly when using the text program it will scroll in and out without stopping. Only way to make it stop is to press the power button to turn the screen off then again to turn the screen back on. Also, when i press the bottom left key to bring up the dialer sometimes it will not and just do nothing. Just as in a phone call i press the bottom right hard key to hang up the call and sometimes it will not respond what so ever.
I know the keys work because when i press them they light up showing i pressed them but they have no effect. This happens about 50% of the time and not at all rom related. I have tried over 8 different roms including those with tf3d2 and wm6.5 and all have the same problem. I have even tried flashing to the stock att rom and even on that rom i am still having this problem. I have never dropped my phone or any physical damage. Any ideas? I have already called warranty exchange and have another fuze on its way to me. I am convinced it has to be hardware related some how since no rom will work 100% for me with these keys. I have had my phone since january and out of the blue this all started about 3 weeks ago.
Bump Bump Bump
I dont have that problem, but sometimes my keys dont work and I have to turn off the screen and turn it back on
sometimes I even have to soft-reset my phone
this is partially because the Left and Right directional button is roughly between the Home/pick up and Back/hang up keys respectively. you have to press more towards the corner otherwise it will register as a left or right press.
another situation is when it is running a bunch of processes in the background it forgets what keys are what and you just have to turn it off and turn it back on (the display) and it should work again. that or open a random program and exit out back into tf3d
goodluck
Actually, I have exactly the problem that you're reporting where the zoom in happens circurlarly, without any ceasing. It's driving me batty.
Heya, Im having an issue where my hardware button led's are stuck on after I put the device into sleep mode, I have to wake the phone up touch the center 'ok' button then set it back to sleep to get the lights to turn off.
Anyone else having this issue or know a fix?
Touch pro, Energy rom 1/aug/09 6.5, It was happining in a 6.1 version of enegy rom too. so maybe a hardware issue?
Icepick66 said:
Heya, Im having an issue where my hardware button led's are stuck on after I put the device into sleep mode, I have to wake the phone up touch the center 'ok' button then set it back to sleep to get the lights to turn off.
Anyone else having this issue or know a fix?
Touch pro, Energy rom 1/aug/09 6.5, It was happining in a 6.1 version of enegy rom too. so maybe a hardware issue?
Click to expand...
Click to collapse
Check your Sounds and Notification Settings, you're probably set to flash for certain notifications. Adjust it and see if it helps.
Its not the center dial flashing, the 4 outside lights for each of the icons remain on.
ive yet to test if reciving a notifcation turns them off.
Thanks
Icepick66 said:
Heya, Im having an issue where my hardware button led's are stuck on after I put the device into sleep mode, I have to wake the phone up touch the center 'ok' button then set it back to sleep to get the lights to turn off.
Anyone else having this issue or know a fix?
Touch pro, Energy rom 1/aug/09 6.5, It was happining in a 6.1 version of enegy rom too. so maybe a hardware issue?
Click to expand...
Click to collapse
I have the same problem, and would be happy if someone has a solution.
MrMoustache said:
I have the same problem, and would be happy if someone has a solution.
Click to expand...
Click to collapse
DITTO
Anyone?
mine does it all the time, between waiting on text messages, typically when i sleep her with the keyboard out.. doesn't bother me tho?
i just look at it and say "you stupid ****in phone" which i do in increasing amounts anyway..?
It has something to do with the keyboard.
Sometimes,when I have the keyboard slided out this happens,so I need to turn it on,close the phone(wait few seconds for stupid autorotation),then switch it off.
today i noticed an odd issue with the lights on the navicap on my TP, When the screen switches off the lights on the navicap stay illuminated (The home, back, answer and hangup buttons) the light round the dpad/scroll wheel dont light up tho, i dont know how long this has been going on though as i have only just noticed it
does anyone know why this mite happen or any ideas to solve it
cheers
I also can confirm this issue.
Seems to happen only when the light has been activated in landcape mode.
I can recreate this failure every time I reply to a SMS:
Slide open keyboard
Keyboard and navipad lights come on
Reply to sms
Press power button
...and tada! The light is stuck on
The light will go off if I press the center dpad button before I turn off the device, or if I turn back on the device and tap the button.
This problem has followed me through 3 ROMs: the stock ATT Fuze ROM, the new ATT ROM, and an older EnergyROM (8/11/09, not sure which version anymore).
I can also confirm that this problem exists across multiple phones running stock software. My first Fuze had this problem, my current Fuze has this problem, and my friend's Fuze does too. Very odd.
Not a showstopper, but I figure it's the only annoyance I really have to put up with day to day, now that I've got the phone configured the way I like it.
Anyone have any ideas?
Thanks in advance!