Heya, Im having an issue where my hardware button led's are stuck on after I put the device into sleep mode, I have to wake the phone up touch the center 'ok' button then set it back to sleep to get the lights to turn off.
Anyone else having this issue or know a fix?
Touch pro, Energy rom 1/aug/09 6.5, It was happining in a 6.1 version of enegy rom too. so maybe a hardware issue?
Icepick66 said:
Heya, Im having an issue where my hardware button led's are stuck on after I put the device into sleep mode, I have to wake the phone up touch the center 'ok' button then set it back to sleep to get the lights to turn off.
Anyone else having this issue or know a fix?
Touch pro, Energy rom 1/aug/09 6.5, It was happining in a 6.1 version of enegy rom too. so maybe a hardware issue?
Click to expand...
Click to collapse
Check your Sounds and Notification Settings, you're probably set to flash for certain notifications. Adjust it and see if it helps.
Its not the center dial flashing, the 4 outside lights for each of the icons remain on.
ive yet to test if reciving a notifcation turns them off.
Thanks
Icepick66 said:
Heya, Im having an issue where my hardware button led's are stuck on after I put the device into sleep mode, I have to wake the phone up touch the center 'ok' button then set it back to sleep to get the lights to turn off.
Anyone else having this issue or know a fix?
Touch pro, Energy rom 1/aug/09 6.5, It was happining in a 6.1 version of enegy rom too. so maybe a hardware issue?
Click to expand...
Click to collapse
I have the same problem, and would be happy if someone has a solution.
MrMoustache said:
I have the same problem, and would be happy if someone has a solution.
Click to expand...
Click to collapse
DITTO
Anyone?
mine does it all the time, between waiting on text messages, typically when i sleep her with the keyboard out.. doesn't bother me tho?
i just look at it and say "you stupid ****in phone" which i do in increasing amounts anyway..?
It has something to do with the keyboard.
Sometimes,when I have the keyboard slided out this happens,so I need to turn it on,close the phone(wait few seconds for stupid autorotation),then switch it off.
Related
Greetings,
I just upgraded to the 2.02.00 ROM last night but still have the occassional lockups. I need to do a soft reboot to get the phone to respond. I believe when it locks up, the radio is still running since I see the blinking Green LED for the GSM. I have to switch off the POWER MANAGEMENT option of "Turn off in x min in not used" for battery power to be able to use the device for calls. The only level of battery saving I am stuck with now is the Backlight auto-off and the beam settings.
Is this something others are having as well or are any applications the culprit?
Thanks in advance for your assistance.
Regards
BHAMEED
------------------------------------------------------------------------
I-Mate JASJAR
--------------
Windiws Mobile 6 (CROSSBOW)Jwright
OS 5.2.318 (Build 15341.0.0.0) AKU 0.0
CE ROM Version : (2.02.00 WWE)
RADIO Version : 1.13.00
ExtROM Version : (2.03.05 WWE) UNLOCKED
Bootloader Version : ver 2.01
Try the power button
All buttons..including the power button...no response.
try holding down the power button
or setting the backlight to atleast one notch.
Urm... uh... ah.... eeee... aaaaaaaaaaaahhhhhhhhhh.
I can confirm this behavior on my MDA Pro (G3).
All ROM versions the same like Bhameed's on my MDA, ...except bootloader of course.
Anyone else noticed this on 2.02.00?
Hold on, can you guys be more specific with this? Are you absolutely sure it doesn't come back on when you PRESS AND HOLD the power button??? Really sorry if I sound like I'm being pedantic, but just from what you've written it sounds like you don't know how to turn on the phone???
hahahaHAHAHA!!! awesome reply spyder
ok, yeah i was thinking this is an issue of not being able to turn on your phone.
yeah what's going on that was different from before?
There have been only few moments where you think "Surely not"... I hate those moments, I'm just hoping this isn't one of them! If it is a genuine problem it's pretty serious and needs to be addressed, but if not.... well, I don't think I should say much more
Please please please say this is all a big joke. I'm tired, please excuse me.
I confirm this behaviour!
And more!
My Qtek freezes... freezes... and then PUFFF. Dead.
I wait some minutes (30 minutes) and I can turn it on again.
I'll send it to qtek.
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
SpyderTracks said:
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
Click to expand...
Click to collapse
Mine freezes everywhere. Bootscreen, Pin code menu (when u type your pin). It depends.
then pda doesn't turn on.
Many problems.
Just go to the assistance. :\
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
aniel1 said:
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
Click to expand...
Click to collapse
Again, I don't have this problem for some reason... I get very few freezes at all.
I think we're getting away from the original point of the post though... and normal freezing is well documented in most OS threads with means to prevent it.
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Bhameed said:
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Click to expand...
Click to collapse
And then you don't have other problems? Like freezes?
EDIT: I flash the original rom but the problem still here
I wonder if this could be a memory leak like someone suggested.... I'm sorry guys, I haven't experienced this problem, and I haven't seen any posts about it until this thread, is there any chance you guys with this issue can keep an eye over your memory status over say a couple of days to see if there's a leek and keep us posted? Once we find out what the problem is it should make a solution easier.
I experienced this problem as well using a cooked WM5 ROM on my HERM200 the only fix I found was migrating to another ROM. I'm currently using CUSTEL_Cing_v1.3, the battery life sucks but I love WM6, it is so much faster, I'm still tweaking and trying to resolve some other issues but other than that I am quite happy with it.
If you are experiencing the lockup I would suggest moving to another ROM as an option, that worked for me. Although a clean install usually fixes a lot of problems.
Hey, I've got a weird problem, my Fuze won't turn on once it fades after not using it. I've tried to press all the buttons and it won't work, I have to physically slide the qwerty keyboard out in order to make my screen reappear again. Does anyone else have this issue and is there a resolution?
I have a flashed Fuze with the TiR v8R WWE ROM on it
kinda obvious, but have you tried the power button at the top?
dukemen said:
Hey, I've got a weird problem, my Fuze won't turn on once it fades after not using it. I've tried to press all the buttons and it won't work, I have to physically slide the qwerty keyboard out in order to make my screen reappear again. Does anyone else have this issue and is there a resolution?
I have a flashed Fuze with the TiR v8R WWE ROM on it
Click to expand...
Click to collapse
I've seen the same thing on the TP (European, stock WWE) that I'm testing. No matter what button you press, the unit will not 'wake up'. I hadn't tried sliding the keyboard -- I'd just automatically reached for the stylus to press the Soft Reset, which got it going again.
Apparently, there's another whole thread of other people with this problem.
http://forum.xda-developers.com/showthread.php?t=425709
Brendo said:
kinda obvious, but have you tried the power button at the top?
Click to expand...
Click to collapse
Yes, actually, that wakes it up as well, but it is very annoying to have to press the power button every single time I want to check my phone. I thought, being a touch phone, that a simple fingertouch would awaken it. I can receive calls but the screen won't turn on so I have no clue who is calling. Could it be a radio issue? Would installing another radio help? This is bugging me to no end
I'm still having this problem anyone have any ideas
Hi,
There are 2 files in windows directory(I use AT&T stock ROM)
devicelocksetting.exe
devicelock.htm
double click devicelocksetting.exe will pop up a screen to let you choose if you want auto-lock the device after backlight turns off. However I checked the option and wait for screen blackout, the device is not locked. Anyone have some sort of idea? please don't recommend other locking software because I am not searching autolocking software, I am just intested in this oem program.
Thanks
HTC_FUZE said:
Hi,
There are 2 files in windows directory(I use AT&T stock ROM)
devicelocksetting.exe
devicelock.htm
double click devicelocksetting.exe will pop up a screen to let you choose if you want auto-lock the device after backlight turns off. However I checked the option and wait for screen blackout, the device is not locked. Anyone have some sort of idea? please don't recommend other locking software because I am not searching autolocking software, I am just intested in this oem program.
Thanks
Click to expand...
Click to collapse
If your backlight is set to Auto, it probably won't work.
Bruce Inman said:
If your backlight is set to Auto, it probably won't work.
Click to expand...
Click to collapse
Wrong. When the backlight turns off (whether its the time out or you press on the power button so it goes to standby) it should auto-lock. It might not work on the ROM you are using though. Its working on 6.5 but theres a screen dimming issue.
I unchecked backlight auto, it is still not working, so it could be ROM problem. I am just wondering AT&T Stock ROM won't support own software?
DJGonzo said:
Wrong. When the backlight turns off (whether its the time out or you press on the power button so it goes to standby) it should auto-lock. It might not work on the ROM you are using though. Its working on 6.5 but theres a screen dimming issue.
Click to expand...
Click to collapse
I don't have this issue, I was just guessing, thus the "probably".
Mine always auto locks.
Bruce Inman said:
I don't have this issue, I was just guessing, thus the "probably".
Mine always auto locks.
Click to expand...
Click to collapse
Well I didn't mean to sound like an ogre either. I'm sorry.
But if it doesn't auto-lock, there is PROBABLY something wrong with your ROM.
today i noticed an odd issue with the lights on the navicap on my TP, When the screen switches off the lights on the navicap stay illuminated (The home, back, answer and hangup buttons) the light round the dpad/scroll wheel dont light up tho, i dont know how long this has been going on though as i have only just noticed it
does anyone know why this mite happen or any ideas to solve it
cheers
I also can confirm this issue.
Seems to happen only when the light has been activated in landcape mode.
I can recreate this failure every time I reply to a SMS:
Slide open keyboard
Keyboard and navipad lights come on
Reply to sms
Press power button
...and tada! The light is stuck on
The light will go off if I press the center dpad button before I turn off the device, or if I turn back on the device and tap the button.
This problem has followed me through 3 ROMs: the stock ATT Fuze ROM, the new ATT ROM, and an older EnergyROM (8/11/09, not sure which version anymore).
I can also confirm that this problem exists across multiple phones running stock software. My first Fuze had this problem, my current Fuze has this problem, and my friend's Fuze does too. Very odd.
Not a showstopper, but I figure it's the only annoyance I really have to put up with day to day, now that I've got the phone configured the way I like it.
Anyone have any ideas?
Thanks in advance!
Hey, My backlight keeps dimming everytime I power on my HTC from sleep. When it's sleeping (just tapping the power button so the screen turns off) the backlight goes really dark when I turn it back on yet the HTC power settings say it's on bright. When I move the bar back and forward the backlight's brightness goes back to its original state. Can someone help me find a fix? I am running tweaks and stuff but I haven't messed with it lately. Hope someone knows what i did wrong if i did anything
Also, Does the HTC Touch Pro accept 32GB cards? If not, is there a way to make it do so? Because I heard there was a way but not told how. All I know is that you have to hack the battery or something.
Thanks alot