prophet rom problem - JAMin, XDA Neo, S200 Software Upgrading

please i really need some help
i have installed a qtec rom on my prophet which worked fine and installed, i did a soft reset and now it is stuck on a blue Qtec screen and reads in the top left hand corner:-
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 10.1.0.011
i would really appreciate any advice on this as i have only just got it and kinda wanted to spend a little more time with it
thanks

all good
its all good with a little more searching around i found out what to do

Related

[Urgent] Dopod 818pro upgrade to WM6 failure

i jsut tried to upgrade my Dopod 818pro to WM6 but when i finished some of the steps and hard-reset the phone it stopped at the 1st picture: Dopod Enjoy Mobililty and the screen shows:
IPL 1.00
SPL 2.15.0000
GSM 02.19.21
OS 10.1.0.811
Even i hard reset or soft rest it is still the same.
Would anybody teach me how to fix it...I will be very much appreciated..
upgrade first to official qtek 2.2 rom, then upload to wm6
Same of my case
Finally, I need to send back to SIS to replace my motherboard.
skywalkerr said:
i jsut tried to upgrade my Dopod 818pro to WM6 but when i finished some of the steps and hard-reset the phone it stopped at the 1st picture: Dopod Enjoy Mobililty and the screen shows:
IPL 1.00
SPL 2.15.0000
GSM 02.19.21
OS 10.1.0.811
Even i hard reset or soft rest it is still the same.
Would anybody teach me how to fix it...I will be very much appreciated..
Click to expand...
Click to collapse

flashin Jamin with wrong flash for helpppppppp

flashin Jamin with wrong flash
--------------------------------------------------------------------------------
hi men
i have jamin g4 i flashed it and now i have this mixed bootloader
IPL 1.000
SPL 2.20.0001
i need ur help i am in this problem for 2 months
thanks
dr ebrahim
i don't see the problem. it's no biggy if you have different versions of ipl and spl. if it works, leave it like that
homw come no proble
my jamin stopped in bootloader i can not install any rom
original or cooked all going to end and after restart of phone again bootloader so i need help
thanks
uve bricked ur phone im afraid, nothing that can be done to bring it back!
if all is hopeless and your device is a G3, try http://forum.xda-developers.com/showthread.php?t=319636
(just part with spl first)
this worked for me, but as i sure learned from flashing ipl/spl 3.08 (before flashing ipl 3.08 of wizard and totally bricking my g3 prophet ), this is no guarantee for others
i tried the post but the same problem i am in bootloader as before
any new idea

no wm6 or 6.1 works after succes in flashing

i have a new vodafone compact s(german)
IPL: 2.20.0001
SPL: 2.15.0001
G4-hard-slp was succesfull.
a "no-ipl-spl-wm5" upgrade was also succesfull.
but no single wm6, oder wm6.1 i've tried, runs after i have flashed it.
the flash itself was succesfull(100%),
green display of 100% status,
automatic reset after flashing...
...but then. only tricolor screen
i have no more ideas...
found solution by myself...
i used soft-spl to enable hard-spl working
after this, i had the right spl...
Please explain. i've got the same problem
After HardSPL, the SPL should be 2.G3.4PDA or 2.G4.4PDA, therefore, the first poster hasn't HardSPLed successfully...
To HardSPL your device, use Prophet Tools (link in my signature).
i am not getting it.
my phone is displaying
ipl 2.15.0001
spl 2.20.0001
after every rom upgrade.
what is hard spl and soft spl????
my screen is stuck.
please help asap
koolkohli said:
i am not getting it.
my phone is displaying
ipl 2.15.0001
spl 2.20.0001
after every rom upgrade.
what is hard spl and soft spl????
my screen is stuck.
please help asap
Click to expand...
Click to collapse
There is wiki page on recovery. Follow that first.
Then you MUST HardSPL your device before flashing a new ROM (look at the "NEW WM6 Upgrade Guide" sticky)
koolkohli said:
i am not getting it.
my phone is displaying
ipl 2.15.0001
spl 2.20.0001
after every rom upgrade.
what is hard spl and soft spl????
my screen is stuck.
please help asap
Click to expand...
Click to collapse
I do agree that HARDspl is very important, but in some special cases,
try the flash tool in my thread~~~ http://forum.xda-developers.com/showthread.php?t=353547
dioxda2 said:
I do agree that HARDspl is very important, but in some special cases,
try the flash tool in my thread~~~ http://forum.xda-developers.com/showthread.php?t=353547
Click to expand...
Click to collapse
HardSPL is just a permanent version of JumpSPL which is used by your program...

Radio, IPL & SPl Versions

It has been some time since I have been here and was wondering.
For someone who lives in California. AT&T
OS 1933
using TNT Build 18533.0.7.0
What is the best
Radio Version
IPL Version
SPI Version
to use. With the lease amount of errors.
And should I upgrade to the new TNT version? What is the benefits?
Thank you.
Firstly, taht is IPL and SPL, don't get it wrong.
IPL and SPL is currently at 3.08, which should be best for WM6 and WM6.1 OS ROMs.
For Radio, just use the one that get best reception as soon as it is 2.xx.
IPL & SPLfor Wizard G4
Could you please help to get latest IPL /SPL for G4 device
there is no ipl spl for g4 as far as i have seen of course i haven't been in wiz section much but dont flash any ipl spl my opinion possible bricking
ph03n1x said:
there is no ipl spl for g4 as far as i have seen of course i haven't been in wiz section much but dont flash any ipl spl my opinion possible bricking
Click to expand...
Click to collapse
i second that .. no ipl/spl for g4 device except for olip version from hard spl ..
the radio is a network dependent selection .. choose from the ones in the ftp
i used almost all of them and the only one that worked perfect for me was the 2.19 .. find it in my signature
also i advice to use tnt rom .. also found in my signature .. it's great !
finally .. please dont brick ur device with ipl/spl installation ... it will brick it!

Upgraded from 2.09/2.09.000 to 2.20/2.20.0000 No Upgrade to WM6.1 possible

Hi guys,
im sorry thar I have to ask. In the last 3 days, I´ve read a lot, but I can't find any hints for my Problem.
Fact is: I updated ma IPL/SPL from 2.09 / 2.09.0000 to 2.20 / 2.20.0000.
So if I want to flash my ROM - for example with this, after rebooting the prophet it stucks in the red/green/blue screen, showing IPL 2.20 and SPL 2.20.0000. In the lower left corner is 'USB' shown, when USB plugged in.
I tried to flash back den WM5 - it works, so that I can use my Prophet again with WM5. BUT I WANT WM 6.1 .
Can please anyone give me some hints, or tell me what I`ve made wrong.
I have no further Idea.
Thank you all for your answers.
animal_cam
GOT IT.
I simply did the HardSPL (including the SoftSPL) once again. An what should I say: Miracles happen . After this in the bootscreen was displayed: IPL 2.20 / SPL 2.G3.4PDA. And now it´s possible to flash each ROM - great
Best regards
animal_cam

Categories

Resources