Database Info

How to upgrade IPL 2.09 ?

Hi, I am facing trouble with my prophet, here is my config :
ipl 2.09
spl 2.20.0000
gsm 02.61.21
os 10.1.0.811
When I flash ROM, the only one that works is
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe but know the prophet restart when I enter the PIN code, If I dont' enter it it works, but as soon as I enter it, it restarts (wired!).
This one returns error 326 invalid command (wrong nbf file)
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
JAMin_WWE_2130923_21309112_020720_ship
I try to upgrade to WM6 and the setup runs succesfully for this one but after
reboot it stop with white screen
Prophet_2007 update Full N2N (20-02-2007)
And this one reports "can't writte ID" and doesn't reboot, stucks at QTEK screen. " the smart WM6".
So what i am thinking is that the problem comes from the IPL version, because i's the only one who stays always at 2.09.
What do you tink.
I alreday did the hard reset and bootloader access.
Thank you

Hi, nobody know how to fix this? I can install WM6, AKU 3.0 but my phone always do the same bugs and I really think it's rellated to the bootloader 2.09.
Bugs list -
When start, can't align the screen need to take off the battery
No vibration
Often the screen is not responding.
Please help to upgrade the IPL....
Thank you

Nobody can help me???????????????????????????????????????

try downgrade the IPL
I didn't find only IPL 2.10 for g3, look for orginal ROM 2.10 and try to install it

here is the IPL 2.10 for G3

How do you apply the new IPL?
I see that a new IPL 2.10 is provided on here but how do you apply it to the prophet?

Applying the new IPL ?
How would you apply this new IPL in the prophet?

USE AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE WILL OCCUR TO YOUR PHONE
DO NOT PROCEED IF YOU DON'T UNDERSTAND THE STEPS.
Do not blame me if you brick your phone
use winrar to extract
open update utility
again use at your own risk

forget to tell
THIS IS FOR G3 ONLY

IPL Update?
Running this utility Like a rom will update the IPL from 2.09 to 2.10? Yes I have the G3 version.

paradis_pal said:
USE AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE WILL OCCUR TO YOUR PHONE
DO NOT PROCEED IF YOU DON'T UNDERSTAND THE STEPS.
Do not blame me if you brick your phone
use winrar to extract
open update utility
again use at your own risk
Click to expand...
Click to collapse
thanks! worked like a charm
before:
ipl 2.09
spl 2.20.0000
gsm 02.61.21
os 3.0.0.0 (AKU3.3.12.ASERG-us)
after:
ipl 2.10
spl 2.20.0000
gsm 02.61.21
os 3.0.0.0 (AKU3.3.12.ASERG-us)

paradis_pal said:
here is the IPL 2.10 for G3
Click to expand...
Click to collapse
I have tried to download the file twice and appears corrupt. Could you please uploaded again - Thanks

paradis_pal said:
here is the IPL 2.10 for G3
Click to expand...
Click to collapse
mine is 2.06， i will try this one!

I upgraded time ago tp IPL 2.10 from IPL 2.09. Is it possible to downgrade back to IPL 2.09?

rasanansa said:
I upgraded time ago tp IPL 2.10 from IPL 2.09. Is it possible to downgrade back to IPL 2.09?
Click to expand...
Click to collapse
Why would you want to do that?
Waht is wrong with 2.10?

does anybody have a ipl 2.15 for g4? Can't find that anywhere...

Here is 2.09 just replace the nk.nbf in the last
Ipl 2.15 for G4 was in the FTP site I can't browse FTP in Syria at this connection, I can't help you now, try to look for it

Shaggy said:
Why would you want to do that?
Waht is wrong with 2.10?
Click to expand...
Click to collapse
Just want to go back. thats all.

paradis_pal said:
Here is 2.09 just replace the nk.nbf in the last
Ipl 2.15 for G4 was in the FTP site I can't browse FTP in Syria at this connection, I can't help you now, try to look for it
Click to expand...
Click to collapse
i am a newbe. how do i "replace the nk.nbf in the last"?

are you kidding with me? just a question.
extract paradis.zip with winrar to a folder, then replace the old nk,nbf in paradis.zip 2.10 with this one 2.09.zip nk.nbf
use winrar because paradis.zip is not a zip archive you have to use winrar

I have SPL 2.21 and can't flash to WM6

Hello everyone,
I'm totally lost in this WM6 upgrade.
I've tried everything but i wont get my MDA Vario to flash with WM6.
My MDA Vario is unlocked (sim and CID) but i can't flash it because of my SPL 2.21????
This is what i have done:
installed button's 1.05 ROM
Download & installed lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
But stil my SPL is at 2.21.
Can someone please help me out here??
Thanks in advance!
Regards,
Schmia

Both your IPL and your SPL must be 2.xx and higher. After you flashed to Buttons rom. did you reflash to a higher version after after you unlocked and cid unlocked your phone to make sure both IPL and SPL were 2.xx or higher?

I've followed the tutorial:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
My IPL was 1.XX after the 1.05 downgrade, but my SPL was still 2.21 even after the rerun.
I have tried to instal T-Mobile 2.26 rom, but it gave an error.

check if you have G3 or G4 unit

I have a 3G device.

Is there nobody who can help me???

schmia said:
Is there nobody who can help me???
Click to expand...
Click to collapse
I think that you haven't unlocked the phone properly. Read Dr. P's tutorial about unlocking G3 phones.
Kirby

if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.

WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).

mfrazzz said:
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
Click to expand...
Click to collapse
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."

Cing 8125 said:
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Click to expand...
Click to collapse
The Dr. P tutorial specifically says this (just not in those words). It tells you (after the last lokiwiz) to watch your screen and that you most likely will still have an SPL of 2.xx and will need to reflash (most people just don't read this and try to move on). The part of about having to reflash numerous times is new though. I've only heard of it a few times, but if you look at the posts from a month or so agao in the Dr P thread on unlocking you'll see where a few people ran into it and it took numerous flashes to finally get SPL to go to 1.xx.

before wm6 roms, every time there was a new rom for wm5 (molski or faria) you'd always get people in the thread mentioning that their ipl and spl are different. in those threads, the advice has always been to reflash a few extra times too. (I personally haven't had any problems with this...but i think i started my unlocking on a 1.8 us t-mobile rom with xelencin's rom...which had an unlocker built into the rom update package).
anyway, the phone's not bricked or anything, so you just have to keep flashing to get it working...
xelencin's rom (the first rom I ever flashed...)
http://forum.xda-developers.com/showthread.php?t=274205&highlight=xelencin

monkey_knight said:
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
Click to expand...
Click to collapse
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia

schmia said:
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
Click to expand...
Click to collapse
yes. ipl and spl should both drop to 1.05. at that point you can go through the unlock and flash back up.

Thanks Guys!!!
With all your good advise, i finally have my MDA Vario flashed with a WM6 rom (TNT 2.0 Professional)
I'm really greatfull to you!
Now i have to find out what WM6 rom is the best for me.
Regards,
Schmia

solution for downgrade the SPL 3.08 for G4 & G3

I may have solution but I'm afraid to post it here, and one has the strength to test it.
it will writ the SPL using pdocwrit;, but I'm afraid cause when read the SPL it will have the same begining of the SPL in nk.nbf but after a while it will have diffreneces, but when I read the SPL using r2sd command it will have the smae SPL in nk.nbf
and I have harmless SPL solution it will have the same version 3.08 but it will be the same as 2.20 if anyone intrested in this please answer me
but he will use it at his own risk, and will not blame me for anything, he might brick his phone.

I'm willing to take the chances. SO, How do I go about it?

I am interested in downgrade spl 3.08 g4,since I do it,thanks I wait for its answer.

this will upgrade to version 3.09.
if done succefuly this new 3.09 has the same functions of 2.20 SPL
so if one has unlocked G3 with 3.08 and success to upgrade 3.09 (2.20) please try to unlock CID the device and to install the 2.20
and if it works with G4 device this 3.09 has the same funtions of 2.20 and the device will be again PM300
till working in pdocwrite I hope this will work for now

I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face

dear
I put my spalsh screen to make sure that you flash the new SPL
cause it will flash firt SPL then new splash screen and new HTC Logo in order.
did you get any error message? please tell me, what device model you have now?

danielalonso said:
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
Click to expand...
Click to collapse
please if you need the old HTC Logo I'll attach it, but tell me did you have any error message?

what is the diference between 2.20 and 3.08,i mean functions?

the functions in 2.20 is for prophet hardware and 3.08 are for charmer hardware and there is of course defference between them
3.09 is for prophet hardware the same as 2.20 and you can stay with it for your prophet
I've seen slick **** here please reply, shall I let them flash SPL using pdocwrite

I have not received any mensage of error when flash my device PM320(htc s200) with paradis g4 only it appears to me in boot screen ipl 2.20 and spl 3.08

I have returned to flash my device with paradis g4 and to me it continues appearing spl 3,08 but now my device continues being pm320 tell me a solution if you know it, thanks. I feel my English I am Spanish

paradis i know that 3.08 is spl from charmer,but i don't understand why then someone ported it for prophet?what better i get with charmer spl?and what with prophet 2.20 spl?

i still have spl 3.08 saying on my G4,...

ok, I see, but strange if there is no error this should be SPL 3.09 with same functions of 2.20
I'll post soon the solution using pdocwrite, I'm at work now, but please hope that no one try it until we hear from slickdick the answer

waiting...

ok,it will hope to that you finish to the solution champion.

I already know how to write the spl using pdocwrite, but I'm afraid to post it
I need a reply from slickdick, it might brick your phone
pleasen read my first post, i don't have the strength to post it, even I know it will be your risk

give it a try man

I'll wait until Saturday if SlickDick didn't answer I'll post it, hope it will work

ok until Saturday then

Prophet device shows wrong IPL?

Hey there
I have just gotten a cheap Prophet, because the former owner thought it was broken.. When i start it up i get the Tree coloured screen.. So i have tried flashing No vendor rom to it but after that i still get the tree coloured screen.. It shows the following numbers
IPL 2.09
SPL 2.20
As far as i know that IPL is not right.. Does anybody know where i can get a RUU that updates the IPL? Thanks!
~D

Da9L said:
Hey there
I have just gotten a cheap Prophet, because the former owner thought it was broken.. When i start it up i get the Tree coloured screen.. So i have tried flashing No vendor rom to it but after that i still get the tree coloured screen.. It shows the following numbers
IPL 2.09
SPL 2.20
As far as i know that IPL is not right.. Does anybody know where i can get a RUU that updates the IPL? Thanks!
~D
Click to expand...
Click to collapse
Hehe just found out why it started up in tree coloured screen everytime i turned it on.. The Camera button was stuck..
But still i would like to update the IPL if its possible ? I Think its a G3 device as it says that the SPL is 2.20.0000 and ipl is 2.09

I got IPL 2.20 For G3 here is the link
http://www.4shared.com/dir/6117112/e2f1e74f/IPL_220.html
and as usual not responsible for briking your phone if it doesnt work.

joelbdsouza said:
I got IPL 2.20 For G3 here is the link
http://www.4shared.com/dir/6117112/e2f1e74f/IPL_220.html
and as usual not responsible for briking your phone if it doesnt work.
Click to expand...
Click to collapse
What is the IPL anyway? And what does the update do? I mean does it make any diffence in use, that i go from version 2.09 to 2.20 ?

IPL - Initial Program Loader: Its the bootloader for PPC. It boots up SPL.
SPL - Secondary Program Loader: Loads the actual OS.
Read the Wiki
http://wiki.xda-developers.com/index.php?pagename=Acronyms

Cannot upgrade to any WM6

Hi guys.
I have this iMate Kjam (Not mine). It was with a T Mobile Official ROM and has IPL/SPL at v2.26. I checked and there was no G4 sign anywhere. Someone had to remove the CID thing to this. I downloaded several WM6 ROMs but once the complete flashing and the device reboots, I'm still in the T-Mobile ROM. I down-flashed to the age-old Button Love WM5 base ROM and here is the ROM status:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
If I upgrade from this point with, let's say, TNT5.0, here is what happens:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
Same right? but all the graphics change when booting. There is the HTC logo when device is turned on and there is the TNT 5.0 "BOOM" title when OS is loading (with the IPL/SPL/GSM/Radio)
Can someone tell me what is going on? HardSPL (http://forum.xda-developers.com/showthread.php?t=332320) clearly tells me that device is NOT G4

Doomer D. Great said:
Hi guys.
I have this iMate Kjam (Not mine). It was with a T Mobile Official ROM and has IPL/SPL at v2.26. I checked and there was no G4 sign anywhere. Someone had to remove the CID thing to this. I downloaded several WM6 ROMs but once the complete flashing and the device reboots, I'm still in the T-Mobile ROM. I down-flashed to the age-old Button Love WM5 base ROM and here is the ROM status:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
If I upgrade from this point with, let's say, TNT5.0, here is what happens:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
Same right? but all the graphics change when booting. There is the HTC logo when device is turned on and there is the TNT 5.0 "BOOM" title when OS is loading (with the IPL/SPL/GSM/Radio)
Can someone tell me what is going on? HardSPL (http://forum.xda-developers.com/showthread.php?t=332320) clearly tells me that device is NOT G4
Click to expand...
Click to collapse
Update:
I was able to install the official T-Mobile ROM onto Button Love ROM. Here is the screen statistics:
IPL: 2.26
SPL: 2.26
GSM: 02.25.11
OS: 2.26.10.2
If I try to upgrade to WM6 now, nothing will happen as I've already tried. After the flash process, it will still be official TMobile...
What should I do now? If I compare the properties of this Wizard with my own, I'm pretty sure this should be a G4 device.

Flash Buttons ROM again and do a CID unlock. That's it! Have fun!

I have a G3, but I had to flash Button twice so that the IPL/SPL matched, then I unlocked and reflashed 2.26 stock (again be sure that IPL/SPL match numbers), then from there I joined rom flashers anonymous!

akashastrega said:
I have a G3, but I had to flash Button twice so that the IPL/SPL matched, then I unlocked and reflashed 2.26 stock (again be sure that IPL/SPL match numbers), then from there I joined rom flashers anonymous!
Click to expand...
Click to collapse
Trying the Button Love ROM the third time... the SPL just won't drop... whats going on?
Cyberdyne said:
Flash Buttons ROM again and do a CID unlock. That's it! Have fun!
Click to expand...
Click to collapse
The only avaliable HardSPL tool doesn't recognize the device as G4... so how do I forced CID unlock? I tried SoftSPL... but at that time, my IPL and SPL were different...

Lets face the situation
IF you have
IPL 2.26 or 1.xx
SPL 2.26 or 2.XX
You have a G3 device - forget do not use Hard SPL or Soft SPL, these are ONLY FOR G4 DEVICES
Since you have a G3 Device you have 2 options
If you have IPL 1.xx and SPL 2.xx . use WST (Wizard Service Tools) to unlock your CID device
http://forum.xda-developers.com/showthread.php?t=329170
Note that only with IPL 1.xx you are hable to unlock your CID with WST
If you have IPL 2.xx and SPL 2.xx, than you must downgrade both to IPL/SPL 1.xx with an official ROM
Before you do something, install WST in you PC, and check the real situation of your device

Pisca said:
Lets face the situation
IF you have
IPL 2.26 or 1.xx
SPL 2.26 or 2.XX
You have a G3 device - forget do not use Hard SPL or Soft SPL, these are ONLY FOR G4 DEVICES
Since you have a G3 Device you have 2 options
If you have IPL 1.xx and SPL 2.xx . use WST (Wizard Service Tools) to unlock your CID device
http://forum.xda-developers.com/showthread.php?t=329170
Note that only with IPL 1.xx you are hable to unlock your CID with WST
If you have IPL 2.xx and SPL 2.xx, than you must downgrade both to IPL/SPL 1.xx with an official ROM
Before you do something, install WST in you PC, and check the real situation of your device
Click to expand...
Click to collapse
Excellent.
If I'm on Button Love ROM, I have IPL v1.x ad SPL v2.x
Should I upgrade to WM6 from here?
If not, then I have to upgrade to Officia T-Mobile ROm. Then IPL/SPL = v2.26 but WM6 won't flash...

Ah ! c'mon guys
Give this guy a break.
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.

Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

zabardast_1 said:
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Click to expand...
Click to collapse
Actually, I followed what Pisca said about using WT and it worked... in Button Love, I finally CID unlocked and upgraded to Official TMobile. Then TNT5.0. All Well
Thank you very much!
Problem solved

Doomer D. Great said:
Excellent.
If I'm on Button Love ROM, I have IPL v1.x ad SPL v2.x
Should I upgrade to WM6 from here?
If not, then I have to upgrade to Officia T-Mobile ROm. Then IPL/SPL = v2.26 but WM6 won't flash...
Click to expand...
Click to collapse
Ok, if you are on IPL 1.xx and SPL 2.xx, you can use WST-Wizard Service Tool 4.2.2 to CID unlock
Then you should load a carrier ROm T-Mobile to get IPL/SPL 2.xx
But allways read as mentioned in the previous post

Doomer D. Great said:
Actually, I followed what Pisca said about using WT and it worked... in Button Love, I finally CID unlocked and upgraded to Official TMobile. Then TNT5.0. All Well
Thank you very much!
Problem solved
Click to expand...
Click to collapse
Great forget my last post