I may have solution but I'm afraid to post it here, and one has the strength to test it.
it will writ the SPL using pdocwrit;, but I'm afraid cause when read the SPL it will have the same begining of the SPL in nk.nbf but after a while it will have diffreneces, but when I read the SPL using r2sd command it will have the smae SPL in nk.nbf
and I have harmless SPL solution it will have the same version 3.08 but it will be the same as 2.20 if anyone intrested in this please answer me
but he will use it at his own risk, and will not blame me for anything, he might brick his phone.
I'm willing to take the chances. SO, How do I go about it?
I am interested in downgrade spl 3.08 g4,since I do it,thanks I wait for its answer.
this will upgrade to version 3.09.
if done succefuly this new 3.09 has the same functions of 2.20 SPL
so if one has unlocked G3 with 3.08 and success to upgrade 3.09 (2.20) please try to unlock CID the device and to install the 2.20
and if it works with G4 device this 3.09 has the same funtions of 2.20 and the device will be again PM300
till working in pdocwrite I hope this will work for now
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
dear
I put my spalsh screen to make sure that you flash the new SPL
cause it will flash firt SPL then new splash screen and new HTC Logo in order.
did you get any error message? please tell me, what device model you have now?
danielalonso said:
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
Click to expand...
Click to collapse
please if you need the old HTC Logo I'll attach it, but tell me did you have any error message?
what is the diference between 2.20 and 3.08,i mean functions?
the functions in 2.20 is for prophet hardware and 3.08 are for charmer hardware and there is of course defference between them
3.09 is for prophet hardware the same as 2.20 and you can stay with it for your prophet
I've seen slick **** here please reply, shall I let them flash SPL using pdocwrite
I have not received any mensage of error when flash my device PM320(htc s200) with paradis g4 only it appears to me in boot screen ipl 2.20 and spl 3.08
I have returned to flash my device with paradis g4 and to me it continues appearing spl 3,08 but now my device continues being pm320 tell me a solution if you know it, thanks. I feel my English I am Spanish
paradis i know that 3.08 is spl from charmer,but i don't understand why then someone ported it for prophet?what better i get with charmer spl?and what with prophet 2.20 spl?
i still have spl 3.08 saying on my G4,...
ok, I see, but strange if there is no error this should be SPL 3.09 with same functions of 2.20
I'll post soon the solution using pdocwrite, I'm at work now, but please hope that no one try it until we hear from slickdick the answer
waiting...
ok,it will hope to that you finish to the solution champion.
I already know how to write the spl using pdocwrite, but I'm afraid to post it
I need a reply from slickdick, it might brick your phone
pleasen read my first post, i don't have the strength to post it, even I know it will be your risk
give it a try man
I'll wait until Saturday if SlickDick didn't answer I'll post it, hope it will work
ok until Saturday then
Related
hi, i want to update to german version again. but it needs SPL 2.15 again. how can i get it?
I've the same problem. I've flashed RUU_Prophet_220734_2207114_024721_QtekWWE_Ship but now I want to go back to RUU_Prophet_215742_2157131_023021_QtekGER_Ship.
every time it stops at 95%
Please give me a hint.
Please warn people that they cannot flash back to lower SPL ( 2.2 to 2.15 )
when will there be a solution to flash from SPL 2.2x to 2.13 or 2.15x ....
they didnt warn us ...
On G4 you can NOT downgrade IPL/SPL, but you can downgrade the OS and EXT rom while keeping the IPL/SPL most of the time. Hope this helps
greetz marl
I have the same porblem. Have someone no idea how i can downgrade spl to 2.15 ???
Sorry for my bad english
So far I found that by SPL 2.20 existence I could not successfully burn official ROM AKU 2.15 from Dopodasia. Using default ROMUpdateUtility.exe failed since the varification phase. Using ROMUpdateUtility_No_Vendor-ID.exe failed around 95%. I personnally believe it is because of SPL.
I could use PDAMobiz downgrade utility and burned it down to 1.xx.xx sth successfully but my dev(il) cannot boot.
Tried many method and finally I have to get Qtek 2.20, either from lvsw downgrade pack (the one used before upgrade to 2.3/2.3.1) or Jesterz AKU2.20 edition.
Sorry I can say...
It's no problem to downgrade the OS, but SPL-downgrade is not possible!
To downgrade OS, follow this HowTo: CLICK ME
please try this
http://www.pdamobiz.com/show_news.asp?NewsID=75293&PN=1
or Go to download here
http://www.pdamobiz.com/show_news.asp?NewsID=75024
unfortunately does not go, I look for exactly the same program ,again orginal flashen can, but spl 2.20.0001 always remains
you can try this : http://www.imei-check.co.uk but it's not free.
It's working for me and now I can Upgrade-Downgrade my Rom-IPL-SPL without NoVendorId.
p.s: Sorry for my poor English...
i have a qtek s200
wanting to upgrade to the radio Prophet_G3_G4_RadioRom_v2.69.21.exe
when i run the file it shows the
from image version :1.2.0.0
to image version:
its blank...
any ideas?
also do i need to upgrade the IPL/SPL, if so please advise
lindows said:
i have a S200 G3 phone
my IPL 1.07 and SPL is 2.20.0000
does know what the official IPL is and the SPL is?
Click to expand...
Click to collapse
dear
it is normal to see to image version balnk, we put any number we want when make the nbf file
about the IPL SPL you have the last SPL don't play with it and don't update to useless 3.08 ok
the IPL i have put the IPL 2.10 some where her in the forum search for it
i see people with IPL 2.20, or 2.15 the one on the site is 2.10, where can i get a 2.20?
I did see 2.20 and 2.15 it is only for G4 and shipped, there is no IPL nb in all ROMS
try 2.10 or 2.09 I did post some where here it is for G3 only
and please don't send pvt msg for this
here is IPL 2.20 for G3 only
use at own risk I'm not responsable of any damage will happend to your phone
Do not blame me if you brick your phone ok
please don't use it unless you are aware that it is your choice
I forgot to put the file
i do have a G3 prophet, but is this official?
thanks for the IPL 2.20, works like a charm
where could i get the latest IPL for my G4?
Thanks!
here is IPL 2.09 2.10 2.20 for G4 only
use at own risk I'm not responsable of any damage will happend to your phone
Do not blame me if you brick your phone ok
please don't use it unless you are aware that it is your choice
please put the wanted IPL (((nk.nbf))) in the upper folder and update
is there anything i need to know befor flashing?
i have an error when i upgrade to IPL 2.20
what error?
iassael said:
what error?
Click to expand...
Click to collapse
Invalid Vendor ID
what do you mean before upgrading?
Is your device ok?
I try with ROMUpdateUtility_NoID.exe and it's ok upgrade successful
i did the same and its ok
have you noticed any differences?
not for the moment but I find it faster
really?
If you notice anything please inform us because i see no difference
Hello everyone,
I'm totally lost in this WM6 upgrade.
I've tried everything but i wont get my MDA Vario to flash with WM6.
My MDA Vario is unlocked (sim and CID) but i can't flash it because of my SPL 2.21????
This is what i have done:
installed button's 1.05 ROM
Download & installed lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
But stil my SPL is at 2.21.
Can someone please help me out here??
Thanks in advance!
Regards,
Schmia
Both your IPL and your SPL must be 2.xx and higher. After you flashed to Buttons rom. did you reflash to a higher version after after you unlocked and cid unlocked your phone to make sure both IPL and SPL were 2.xx or higher?
I've followed the tutorial:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
My IPL was 1.XX after the 1.05 downgrade, but my SPL was still 2.21 even after the rerun.
I have tried to instal T-Mobile 2.26 rom, but it gave an error.
check if you have G3 or G4 unit
I have a 3G device.
Is there nobody who can help me???
schmia said:
Is there nobody who can help me???
Click to expand...
Click to collapse
I think that you haven't unlocked the phone properly. Read Dr. P's tutorial about unlocking G3 phones.
Kirby
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
mfrazzz said:
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
Click to expand...
Click to collapse
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Cing 8125 said:
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Click to expand...
Click to collapse
The Dr. P tutorial specifically says this (just not in those words). It tells you (after the last lokiwiz) to watch your screen and that you most likely will still have an SPL of 2.xx and will need to reflash (most people just don't read this and try to move on). The part of about having to reflash numerous times is new though. I've only heard of it a few times, but if you look at the posts from a month or so agao in the Dr P thread on unlocking you'll see where a few people ran into it and it took numerous flashes to finally get SPL to go to 1.xx.
before wm6 roms, every time there was a new rom for wm5 (molski or faria) you'd always get people in the thread mentioning that their ipl and spl are different. in those threads, the advice has always been to reflash a few extra times too. (I personally haven't had any problems with this...but i think i started my unlocking on a 1.8 us t-mobile rom with xelencin's rom...which had an unlocker built into the rom update package).
anyway, the phone's not bricked or anything, so you just have to keep flashing to get it working...
xelencin's rom (the first rom I ever flashed...)
http://forum.xda-developers.com/showthread.php?t=274205&highlight=xelencin
monkey_knight said:
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
Click to expand...
Click to collapse
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
schmia said:
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
Click to expand...
Click to collapse
yes. ipl and spl should both drop to 1.05. at that point you can go through the unlock and flash back up.
Thanks Guys!!!
With all your good advise, i finally have my MDA Vario flashed with a WM6 rom (TNT 2.0 Professional)
I'm really greatfull to you!
Now i have to find out what WM6 rom is the best for me.
Regards,
Schmia
flashin Jamin with wrong flash
--------------------------------------------------------------------------------
hi men
i have jamin g4 i flashed it and now i have this mixed bootloader
IPL 1.000
SPL 2.20.0001
i need ur help i am in this problem for 2 months
thanks
dr ebrahim
i don't see the problem. it's no biggy if you have different versions of ipl and spl. if it works, leave it like that
homw come no proble
my jamin stopped in bootloader i can not install any rom
original or cooked all going to end and after restart of phone again bootloader so i need help
thanks
uve bricked ur phone im afraid, nothing that can be done to bring it back!
if all is hopeless and your device is a G3, try http://forum.xda-developers.com/showthread.php?t=319636
(just part with spl first)
this worked for me, but as i sure learned from flashing ipl/spl 3.08 (before flashing ipl 3.08 of wizard and totally bricking my g3 prophet ), this is no guarantee for others
i tried the post but the same problem i am in bootloader as before
any new idea
I'm triying to make UPGRADE with differents ROM but when the process finish i stell having the same OS WM5 from Tmobile, i did downgrade with botton downgrade rom i used LOKIWIZZ but ever happen the same, what i doing wrong?
ISPL 3.08
SPL 3.08
You should be more detailed in explaining things.
First Try to tell us step by step what errors are you getting.
On the signature you say ipl/spl 3.08 (it should mean you're cid unlocked).
So please describe the update rom process better
OK First I had IPL 2.26 and SPL 2.26 with TMOBILE wizard ROM I tryed to update to to WM6 HTC Professional + Home, everything in the process look in order, pass to 99 % in the Progress BAR and wait several minutes and i get again the tmobile ROM the same one, so read several post and I dicide to downgrade with Wizard Button ROM, and it was succesefully, I was in that moment ipl 1.05 something else and SPL 2.26, so I used, so I upgrade to the TMOBILE wizard ROM, and I get IPL 2.26 and SPL 2.26 and I'm tryed again to made a new UPGRade with the same ROM WM6 HTC Professional + Home and it was the same results again, so I made the UPGRADE with the IPS_SPL 3.08 File and now I m in this point now. So what i must do?
Downgrade IPL and SPL does not mean you have CID unlocked your phone. You need to use lokwiz02 to unlocked it when IPL is 1.01. Then first upgrade IPL to 2.2x / 3.08, after that you can proceed to upgrade WM6.
All instructions and links are in stickes.