i have a qtek s200
wanting to upgrade to the radio Prophet_G3_G4_RadioRom_v2.69.21.exe
when i run the file it shows the
from image version :1.2.0.0
to image version:
its blank...
any ideas?
also do i need to upgrade the IPL/SPL, if so please advise
lindows said:
i have a S200 G3 phone
my IPL 1.07 and SPL is 2.20.0000
does know what the official IPL is and the SPL is?
Click to expand...
Click to collapse
dear
it is normal to see to image version balnk, we put any number we want when make the nbf file
about the IPL SPL you have the last SPL don't play with it and don't update to useless 3.08 ok
the IPL i have put the IPL 2.10 some where her in the forum search for it
i see people with IPL 2.20, or 2.15 the one on the site is 2.10, where can i get a 2.20?
I did see 2.20 and 2.15 it is only for G4 and shipped, there is no IPL nb in all ROMS
try 2.10 or 2.09 I did post some where here it is for G3 only
and please don't send pvt msg for this
here is IPL 2.20 for G3 only
use at own risk I'm not responsable of any damage will happend to your phone
Do not blame me if you brick your phone ok
please don't use it unless you are aware that it is your choice
I forgot to put the file
i do have a G3 prophet, but is this official?
thanks for the IPL 2.20, works like a charm
where could i get the latest IPL for my G4?
Thanks!
here is IPL 2.09 2.10 2.20 for G4 only
use at own risk I'm not responsable of any damage will happend to your phone
Do not blame me if you brick your phone ok
please don't use it unless you are aware that it is your choice
please put the wanted IPL (((nk.nbf))) in the upper folder and update
is there anything i need to know befor flashing?
i have an error when i upgrade to IPL 2.20
what error?
iassael said:
what error?
Click to expand...
Click to collapse
Invalid Vendor ID
what do you mean before upgrading?
Is your device ok?
I try with ROMUpdateUtility_NoID.exe and it's ok upgrade successful
i did the same and its ok
have you noticed any differences?
not for the moment but I find it faster
really?
If you notice anything please inform us because i see no difference
Related
Hi, I am facing trouble with my prophet, here is my config :
ipl 2.09
spl 2.20.0000
gsm 02.61.21
os 10.1.0.811
When I flash ROM, the only one that works is
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe but know the prophet restart when I enter the PIN code, If I dont' enter it it works, but as soon as I enter it, it restarts (wired!).
This one returns error 326 invalid command (wrong nbf file)
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
JAMin_WWE_2130923_21309112_020720_ship
I try to upgrade to WM6 and the setup runs succesfully for this one but after
reboot it stop with white screen
Prophet_2007 update Full N2N (20-02-2007)
And this one reports "can't writte ID" and doesn't reboot, stucks at QTEK screen. " the smart WM6".
So what i am thinking is that the problem comes from the IPL version, because i's the only one who stays always at 2.09.
What do you tink.
I alreday did the hard reset and bootloader access.
Thank you
Hi, nobody know how to fix this? I can install WM6, AKU 3.0 but my phone always do the same bugs and I really think it's rellated to the bootloader 2.09.
Bugs list -
When start, can't align the screen need to take off the battery
No vibration
Often the screen is not responding.
Please help to upgrade the IPL....
Thank you
Nobody can help me???????????????????????????????????????
try downgrade the IPL
I didn't find only IPL 2.10 for g3, look for orginal ROM 2.10 and try to install it
here is the IPL 2.10 for G3
How do you apply the new IPL?
I see that a new IPL 2.10 is provided on here but how do you apply it to the prophet?
Applying the new IPL ?
How would you apply this new IPL in the prophet?
USE AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE WILL OCCUR TO YOUR PHONE
DO NOT PROCEED IF YOU DON'T UNDERSTAND THE STEPS.
Do not blame me if you brick your phone
use winrar to extract
open update utility
again use at your own risk
forget to tell
THIS IS FOR G3 ONLY
IPL Update?
Running this utility Like a rom will update the IPL from 2.09 to 2.10? Yes I have the G3 version.
paradis_pal said:
USE AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE WILL OCCUR TO YOUR PHONE
DO NOT PROCEED IF YOU DON'T UNDERSTAND THE STEPS.
Do not blame me if you brick your phone
use winrar to extract
open update utility
again use at your own risk
Click to expand...
Click to collapse
thanks! worked like a charm
before:
ipl 2.09
spl 2.20.0000
gsm 02.61.21
os 3.0.0.0 (AKU3.3.12.ASERG-us)
after:
ipl 2.10
spl 2.20.0000
gsm 02.61.21
os 3.0.0.0 (AKU3.3.12.ASERG-us)
paradis_pal said:
here is the IPL 2.10 for G3
Click to expand...
Click to collapse
I have tried to download the file twice and appears corrupt. Could you please uploaded again - Thanks
paradis_pal said:
here is the IPL 2.10 for G3
Click to expand...
Click to collapse
mine is 2.06， i will try this one!
I upgraded time ago tp IPL 2.10 from IPL 2.09. Is it possible to downgrade back to IPL 2.09?
rasanansa said:
I upgraded time ago tp IPL 2.10 from IPL 2.09. Is it possible to downgrade back to IPL 2.09?
Click to expand...
Click to collapse
Why would you want to do that?
Waht is wrong with 2.10?
does anybody have a ipl 2.15 for g4? Can't find that anywhere...
Here is 2.09 just replace the nk.nbf in the last
Ipl 2.15 for G4 was in the FTP site I can't browse FTP in Syria at this connection, I can't help you now, try to look for it
Shaggy said:
Why would you want to do that?
Waht is wrong with 2.10?
Click to expand...
Click to collapse
Just want to go back. thats all.
paradis_pal said:
Here is 2.09 just replace the nk.nbf in the last
Ipl 2.15 for G4 was in the FTP site I can't browse FTP in Syria at this connection, I can't help you now, try to look for it
Click to expand...
Click to collapse
i am a newbe. how do i "replace the nk.nbf in the last"?
are you kidding with me? just a question.
extract paradis.zip with winrar to a folder, then replace the old nk,nbf in paradis.zip 2.10 with this one 2.09.zip nk.nbf
use winrar because paradis.zip is not a zip archive you have to use winrar
i have the 818pro upgrade to 2.20.
how to downgrade to before 818pro spl.
now i try to upgrade to 818pro 2.15 rom, but cannot. why ?
i need to help ... pls
High IPL/SPL Version wins! You cant downgrade!
Hi wg132,
You can downgrade if your device is a G3.
Check if your IPL/SPL end with x.xx.0000 (x.xx.0001 are G4)
Firstly, you need to CID unlock your device by flashing rom using
pdamobiz.com_downgrade_and_unlockcid rom.rar
(Please note that this rom is not usable and serve only to unlock CID)
You can then downgrade your SPL to 2.15 using
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip
I don't have the links to the above files. You need to search for them yourself. Hope this helps.
wg132 said:
i have the 818pro upgrade to 2.20.
how to downgrade to before 818pro spl.
now i try to upgrade to 818pro 2.15 rom, but cannot. why ?
i need to help ... pls
Click to expand...
Click to collapse
Why do you need to downgrade SPL 2.20? Is there any specific problem with that SPL? so far my SPL 2.20 is working well with WM6 and WM5. I wouldnt touch IPL and or upgrade SPL to 3.xx
kenxu said:
Why do you need to downgrade SPL 2.20? Is there any specific problem with that SPL? so far my SPL 2.20 is working well with WM6 and WM5. I wouldnt touch IPL and or upgrade SPL to 3.xx
Click to expand...
Click to collapse
What is IPL and SPL?
BIOS ... Bootloader ... Radioloader
if i have 3.08 can i do this?
no ... higher version number wins and the next ... spl 3.08 is charmer ... it means no prophet spl can flashed back!
can i flash it with another charmer?
uhm ... if you want brick/damage your device ... sure
this are a modded spl to run on prophet! highest prophet spl is version 2.58 and only for g4. nobody have uploaded in the moment!
hi all.. just a little question here.. im using dopod 818 pro G3. as far as i read in this forum.. all mention that ipl 2.20.0000. but why my ipl is only showing 2.20 and no 0000 at the end? is that common or something wrong with my dopod 818 pro?
Hello everyone,
I'm totally lost in this WM6 upgrade.
I've tried everything but i wont get my MDA Vario to flash with WM6.
My MDA Vario is unlocked (sim and CID) but i can't flash it because of my SPL 2.21????
This is what i have done:
installed button's 1.05 ROM
Download & installed lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
But stil my SPL is at 2.21.
Can someone please help me out here??
Thanks in advance!
Regards,
Schmia
Both your IPL and your SPL must be 2.xx and higher. After you flashed to Buttons rom. did you reflash to a higher version after after you unlocked and cid unlocked your phone to make sure both IPL and SPL were 2.xx or higher?
I've followed the tutorial:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with.
My IPL was 1.XX after the 1.05 downgrade, but my SPL was still 2.21 even after the rerun.
I have tried to instal T-Mobile 2.26 rom, but it gave an error.
check if you have G3 or G4 unit
I have a 3G device.
Is there nobody who can help me???
schmia said:
Is there nobody who can help me???
Click to expand...
Click to collapse
I think that you haven't unlocked the phone properly. Read Dr. P's tutorial about unlocking G3 phones.
Kirby
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
mfrazzz said:
WHen you downgrade to the Button rom, in most cases the IPL will change, but the SPL will not. You then have to downgrade again to get the SPL to get to 1.xx . There have been some cases reported where it takes reflahsing the button rom many times (like 8 times or somesuch) before the SPL will finally come down, but you have to complete this step or you will not be CID Unlocked.
Make sure you have your SD card out when you are flashing as this can cause problems.
Good luck, and sorry, but for those that have run into the stuck SPL there hasn't been a real solution other than keep flashing the button rom until it drops down to 1.xx. After that then the CID unlock will be complete and you can then flash the T-Mobile 2.26 rom (or whatever other 2.xx rom you want).
Click to expand...
Click to collapse
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Cing 8125 said:
This should be added to the tutorials about Unlocking & Rom Upgrading.
And this quote also.
"if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different."
Click to expand...
Click to collapse
The Dr. P tutorial specifically says this (just not in those words). It tells you (after the last lokiwiz) to watch your screen and that you most likely will still have an SPL of 2.xx and will need to reflash (most people just don't read this and try to move on). The part of about having to reflash numerous times is new though. I've only heard of it a few times, but if you look at the posts from a month or so agao in the Dr P thread on unlocking you'll see where a few people ran into it and it took numerous flashes to finally get SPL to go to 1.xx.
before wm6 roms, every time there was a new rom for wm5 (molski or faria) you'd always get people in the thread mentioning that their ipl and spl are different. in those threads, the advice has always been to reflash a few extra times too. (I personally haven't had any problems with this...but i think i started my unlocking on a 1.8 us t-mobile rom with xelencin's rom...which had an unlocker built into the rom update package).
anyway, the phone's not bricked or anything, so you just have to keep flashing to get it working...
xelencin's rom (the first rom I ever flashed...)
http://forum.xda-developers.com/showthread.php?t=274205&highlight=xelencin
monkey_knight said:
if your ipl is 1.05 and your spl is still 2.21...then you need to reflash again so that both ipl and spl are 1.05 before you can proceed. ipl and spl should never be different.
Click to expand...
Click to collapse
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
schmia said:
I've re-flashed 3 times but if i understand correct, than i have to retry flashing until SPL and IPL are the same?
Regards,
Schmia
Click to expand...
Click to collapse
yes. ipl and spl should both drop to 1.05. at that point you can go through the unlock and flash back up.
Thanks Guys!!!
With all your good advise, i finally have my MDA Vario flashed with a WM6 rom (TNT 2.0 Professional)
I'm really greatfull to you!
Now i have to find out what WM6 rom is the best for me.
Regards,
Schmia
I may have solution but I'm afraid to post it here, and one has the strength to test it.
it will writ the SPL using pdocwrit;, but I'm afraid cause when read the SPL it will have the same begining of the SPL in nk.nbf but after a while it will have diffreneces, but when I read the SPL using r2sd command it will have the smae SPL in nk.nbf
and I have harmless SPL solution it will have the same version 3.08 but it will be the same as 2.20 if anyone intrested in this please answer me
but he will use it at his own risk, and will not blame me for anything, he might brick his phone.
I'm willing to take the chances. SO, How do I go about it?
I am interested in downgrade spl 3.08 g4,since I do it,thanks I wait for its answer.
this will upgrade to version 3.09.
if done succefuly this new 3.09 has the same functions of 2.20 SPL
so if one has unlocked G3 with 3.08 and success to upgrade 3.09 (2.20) please try to unlock CID the device and to install the 2.20
and if it works with G4 device this 3.09 has the same funtions of 2.20 and the device will be again PM300
till working in pdocwrite I hope this will work for now
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
dear
I put my spalsh screen to make sure that you flash the new SPL
cause it will flash firt SPL then new splash screen and new HTC Logo in order.
did you get any error message? please tell me, what device model you have now?
danielalonso said:
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
Click to expand...
Click to collapse
please if you need the old HTC Logo I'll attach it, but tell me did you have any error message?
what is the diference between 2.20 and 3.08,i mean functions?
the functions in 2.20 is for prophet hardware and 3.08 are for charmer hardware and there is of course defference between them
3.09 is for prophet hardware the same as 2.20 and you can stay with it for your prophet
I've seen slick **** here please reply, shall I let them flash SPL using pdocwrite
I have not received any mensage of error when flash my device PM320(htc s200) with paradis g4 only it appears to me in boot screen ipl 2.20 and spl 3.08
I have returned to flash my device with paradis g4 and to me it continues appearing spl 3,08 but now my device continues being pm320 tell me a solution if you know it, thanks. I feel my English I am Spanish
paradis i know that 3.08 is spl from charmer,but i don't understand why then someone ported it for prophet?what better i get with charmer spl?and what with prophet 2.20 spl?
i still have spl 3.08 saying on my G4,...
ok, I see, but strange if there is no error this should be SPL 3.09 with same functions of 2.20
I'll post soon the solution using pdocwrite, I'm at work now, but please hope that no one try it until we hear from slickdick the answer
waiting...
ok,it will hope to that you finish to the solution champion.
I already know how to write the spl using pdocwrite, but I'm afraid to post it
I need a reply from slickdick, it might brick your phone
pleasen read my first post, i don't have the strength to post it, even I know it will be your risk
give it a try man
I'll wait until Saturday if SlickDick didn't answer I'll post it, hope it will work
ok until Saturday then
How can i upgrade my SPL version to 2.20?
i have a g4 prophet with SPL and IPL 2.10.
Thanks
Brun0_0000 said:
How can i upgrade my SPL version to 2.20?
i have a g4 prophet with SPL and IPL 2.10.
Thanks
Click to expand...
Click to collapse
There is an item on the WiKi about this. Is there any big reason why you want to though? Because any damage done during this process is very hard to rectify...
When the wiki starts working for me, I'll find you the page...
Thank you. i already update to version 2.G4.4PDA. but i want to update to version 2.20.0001
The easiest way to do that is to flash a WM5 Official ROM such as the Orange one (they are all available on the FTP server).