Pplz,
I've tried to upgrade my s200 (G4) with AKU 3.3.13 ASerg. Unfortunately I aborted the connection, because I thought the upgrade was successful after 20 min. Now I have first screen page on s200 only (OS 3.0.0.0) without any connection to PC(
Any idea what I have to do?
You should first disable "Allow USB-connection" in ActiveSync. Connect your S200 in bootloader mode (press camera-button and soft-reset with stylus) to your PC, then you can run the Rom update again.
Good Luck!!
thanks a lot!
Great idea! It works! I completely forgot about bootloader mode.
Related
Hello,
My S200 doesn't work. Why?
Because:
1-I had a version of OS - 2.13.9.26 (versao em Portugues)
2-I update for AKU 3.2 ( PDAMobiz_Prophet_WM5AKU3.2_v3231)
3-Tried to unlock ( lokiwiz03a)
4-S200 doesn't work well, didn't receive calls (only rings when I choose Start> Phone), it was impossible saw the contacts, etc. So I tried install AKU 2.3 (2006-11-12_Prophet_WM5AKU2.3_lvsw_edition);
5-The instalation was longer than 30 min, so I restarted.
Now, the phone doesn't start the OS. Stay on "bios" stage:
IPL - 2.09.0001
SPL - 2.13.0001
GSM- 02.30.21
OS - 2.15.13.27
I just tried:
-(2 buttons + restart + Dial button) - for factory default
-restart
What I do now? It's impossible to install another ROM...
Thaks in advance.
JoDiz from Portugal.
-go into bootloader mode (hold camera button and press reset)
-upgrade to the latest Dopod ROM ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip (you MUST do this before upgrading to AKU 2.3 or 3.2)
-upgrade to AKU 2.3 or 3.2
2.3 is more stable... but 3.2 has more features
Impossible
Hi,
But it's impossible install other ROM. I can't connect S200 with PC by ActiveSync. I had try all the combinations that I knew to restart, but... nothing.
I think that when I did the first Update, to version 3.2, I didn't make the HARD RESET, I madden a normal reset. And I think, that these is the reason for the message: "ActiveSync can't syncronized with your device, please free memory, or restart your device".
How I do for connect the device to my PC? If I don't connect my device with PC it's impossible install anything.
Thanks,
Best Regards.
while in bootloader mode (color bars) connect usb cable then run original dopod rom installer from desktop. it should work
csjneek said:
while in bootloader mode (color bars) connect usb cable then run original dopod rom installer from desktop. it should work
Click to expand...
Click to collapse
Yes, u don't need activesync as long as the USB is detected when you plug it into the device.
thank u
i had the same problem on my g4 i-mate jamin with the 2.13 rom
thank u
It works
Hi, it works.
Thanks for the help.
Hello, I tried to upgrade my m600 to wm6, but the phone freezed and now goes in bootloader but no usb connection.
My pc cant connet to phone, can I flash with sd card?
It seems than bootloader is corrupted the phone freezes after reboot.
Here here my infos:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 10.1.0.811
Will it enter bootloader mode, hold down camera button and reset?
JD
Does anyone get tired of typing the same instructions on this list
Are you using windows XP? Vista will not work
JD
johnnyduk said:
Will it enter bootloader mode, hold down camera button and reset?
JD
Does anyone get tired of typing the same instructions on this list
Click to expand...
Click to collapse
Hi
My S200 after upgrade to WM6 can't load windows
Hang in the blue page (Qtek) before load windows
can i reloade WM5 on my 200? How?
this guy is my dear friend, he's got a G4 device, and has flashed the wrong wm6 rom on his device, and successfully broke it!
any solution/remedies would be extremely appreciated
Did you read all the instructions before flashing the device?
Try to get into the 3 color screen and reflash with an official ROM.
please help me simple, my english is very bad!
can i reload wm5?
try like this
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
bugmenot said:
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
Click to expand...
Click to collapse
my ipl and spl is 2.09.0001
if install this rom so upgrade that to WM6 have problem?
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
b-xenon said:
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
Click to expand...
Click to collapse
Reading it... your phone doesn't work anyway... so why bother?
do the upgrade!! ;-)
Thank's my friends
Hi there
I'm a noob to PDA things but I decided to upgrade my S200 to WM6 (that was NOT a good idea!)
After downloading this http://rs23l34.rapidshare.com/files/17953287/3266540/smart1_wm6_pp8mb.exe file I run the upgrade batch file BUT it was working for 50min so I unplugged the device. I probably should not do that!! ...because there are some problems: no ringtone for incoming calls, no digits to dial an outgoing call and many theme problems.
Now I'm not able to connect it to activesync (4.5) to do a downgrade because a message comes up that says "ActiveSync cannot connect to the WM device" and there's a network icon on the tray with limited connectivity. I did 3 hard resets by holding power + camera + comm manager buttons + reset and I've tried the trick with the camera button pressed while powering on and after connect it to USB but still nothing...
Can someone help??? I'd like to have WM6 installed but I really have to fix my phone even If I have to setup WM5 again.
Many thanks
Try to make a RUU downgrade in bootloader mode!
Way 1: Download the ROM from the 02 homepage and after 15 min you have a fully useable WM5 device!
Way 2: To reinstall an another WM6 Rom you have to flash AKU2.2 and then you can try to install a different WM6 Rom! You can find AKU2.2 in the threads of the WM6 Roms. The name of the file is often ...TEMP.zip like in PDA Viet!
Happy flashing!
greetz Ben
Hardcore898 said:
Try to make a RUU downgrade in bootloader mode!
Download the ROM from the 02 homepage and after 15 min you have a fully useable WM5 device!
greetz Ben
Click to expand...
Click to collapse
How I'll do that? There is no connection to activesync
Is there any way to flash from the memory card?
In active sync, disable connect through USB. Then enter bootloader (Camera button and soft reset), and then run the RUU. Your device should start properly now.
Great!!!!!!!! it worked!!!!!
Thanks a lot
No problem.
Hello
HTC Tornado - working but not in 100%.
If I want swith on - everything stop on first logo.
I can swith on this device in bootloader mode, after it I readed this:
Tornado
IPL 2.00
Tornado
SPL 2.00 0000
Tornado IU
USB
Today i download some rom file :
Build_5.2.1616.18120_____v3.7
but after flashing try - i see error "device is not connected".
With phone off, press and hold CAM button and plug in your USB Cable. As long as you see USB like on lower left of screen, as you have posted, you are good to flash. You might be using wrong ROM or wrong procedure. Make sure you follow Karhoe's guide for TORNADO. Under worse situation, flash with ShipRom which you can find on FTP and you'll be back to OEM state. Good Luck!
FYI: I'm using Nitrogen's WM6.0 SP1 and latest radio on his thread.
smootny said:
Hello
HTC Tornado - working but not in 100%.
If I want swith on - everything stop on first logo.
I can swith on this device in bootloader mode, after it I readed this:
Tornado
IPL 2.00
Tornado
SPL 2.00 0000 <<--- I HAVE SPL 2.00.0014
Tornado IU
USB <<<----GOOD NEWS
Today i download some rom file :
Build_5.2.1616.18120_____v3.7
but after flashing try - i see error "device is not connected".
Click to expand...
Click to collapse