Database Info

Autorun and crossbow

Faria and NTS seem to know this...
How do we get the extended rom to automatically run on Crossbow? I've searched Google and others and haven't found a thing. Is it a reg. setting or what?

jwzg said:
Faria and NTS seem to know this...
How do we get the extended rom to automatically run on Crossbow? I've searched Google and others and haven't found a thing. Is it a reg. setting or what?
Click to expand...
Click to collapse
Ok, you have an autorun.exe in the windows directory, and a config.txt file in the windows directory. The config.txt is the same as it was in WM5 just a location change. Have all your lines point to \extended_rom\ and youll be fine

Wrong thread I know - but I looked all over the place and can't seem to find the definitive answer ... so here goes - am I correct in assuming that it's possible to delete the contents of ext_rom once you've used them? I guess that they are only for installing into the "real" storage, and just as long as you don't need them following a hard reset, they are just taking up some space .. am I correct?

I'm working with orwell's. Those files aren't there, so what has to happen?

radiotrib said:
Wrong thread I know - but I looked all over the place and can't seem to find the definitive answer ... so here goes - am I correct in assuming that it's possible to delete the contents of ext_rom once you've used them? I guess that they are only for installing into the "real" storage, and just as long as you don't need them following a hard reset, they are just taking up some space .. am I correct?
Click to expand...
Click to collapse
No. In AKU 2.x and above, the extended rom partition is locked and cannot be written to and cannot have files deleted.

jwzg said:
I'm working with orwell's. Those files aren't there, so what has to happen?
Click to expand...
Click to collapse
If you are on orwells, you need to do it the WM5 way from what I understand.

nottoosmart said:
If you are on orwells, you need to do it the WM5 way from what I understand.
Click to expand...
Click to collapse
I'm not too smart either...can you give instructions?

In the system hive, (default.hv) you should have:
[HKEY_LOCAL_MACHINE\Comm]
"TurnRadioFlag"=dword:0
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Most of the WM6 ROMs are missing the last two keys, thus the Autorun of the Extended_ROM is disabled by default.

eluth said:
In the system hive, (default.hv) you should have:
[HKEY_LOCAL_MACHINE\Comm]
"TurnRadioFlag"=dword:0
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Most of the WM6 ROMs are missing the last two keys, thus the Autorun of the Extended_ROM is disabled by default.
Click to expand...
Click to collapse
in all honesty, you are wrong. Even if those lines are there, for some reason the checkautorun still looks in the windows directory for the config file and the autorun file. I have searched the whole default.hv and still cant figure out why. You figure it out and ill give you a cookie.

New WM6 ROM kitchen (from Ranju)

Hello Friends,
I have managed the new WM6 kitchen based on Ivan's new (17913.0.3.0) build. This is a clean vanilla kitchen, you can add your own flavor and the way you want it.
I've uploaded the kitchen to the following url and hope that you will like it.
http://www.siemens-bd.net/files/000000
Files have been splited into 10 parts (5MB each) because of my unstable internet connection here. Uploading a 50MB file for me is simply a nightmare! Please download all of them and unrar.
You will find two cmd files (1. BuildKitchen.cmd and 2. CreateROM.cmd) inside the ROM_DEV folder after the unrar.
Step-1: Run the BuildKitchen.cmd (first time only), it will dump the rom and prepare the kitchen for you.
[Additionally, you may use it to dump other WM6 rom and prepare the kitchen. In that case, decode the rom, copy (or overwrite) the nk.nba file to the ROM folder and run this cmd to build the kitchen.]
Step-2: Run the CreateROM.cmd to build the rom...as usual.
You will find a Ranju_OEM folder under the ROM_DEV folder. Some of the oem packages have been added if anyone is interested to use. Just copy your desired packages to the OEM folder and build the rom.
And finally, all credit goes to Ivan. Special thanx to Helmi, Midget, Bepe and Tuatara for their tools and support.
By the way, I've a limited bandwidth to this server, it will be great if someone mirror it somewhere.
Best regards,
Ranju

ranju said:
By the way, I've a limited bandwidth to this server, it will be great if someone mirror it somewhere.
Click to expand...
Click to collapse
Mirrored:
http://vidmes.com/Uni/Kitchens/ranju/ROM_DEV.rar
(btw My mirror has a Bandwidth limit of 3Tb per month...)

TehPenguin said:
Mirrored:
http://vidmes.com/Uni/Kitchens/ranju/ROM_DEV.rar
(btw My mirror has a Bandwidth limit of 3Tb per month...)
Click to expand...
Click to collapse
Hi TehPenguin, thank you very much.

Thanks to ranju and thanks to tehpenguin!

ranju said:
I have managed the new WM6 kitchen based on Ivan's new (17913.0.3.0) build. This is a clean vanilla kitchen, you can add your own flavor and the way you want it.
Click to expand...
Click to collapse
Thx for the new kitchen. Based on V3, correct?
Could you please clarify the 1st post?
Clean Vanilla: What did you remove from the ROM?
Cheers

Download
Extract
BuildKitchen
CreateRom
BuildOS stops on error: the file 'temp\dump\Thumbs.db' already exists

I've just checked the OEM folder.
Very good Job: just like i was thinking. Probably I don't need any other apps for OEM.
THX!!!

tailazoom said:
Download
Extract
BuildKitchen
CreateRom
BuildOS stops on error: the file 'temp\dump\Thumbs.db' already exists
Click to expand...
Click to collapse
Did you modify any cmd file?
If not, then delete the temp folder. Do a search on SYS & OEM for "Thumbs.db" and delete them if found any. Run the CreateROM.cmd.
I suppose "Thumbs.db" have been created by your picture browser apps.

"Thumbs.db" is a file that Windows XP (and Vista) create if you preview a picture or movie. Its not important at all (although Windows will complain that it is a "System File")
(Nifty fact: Windows XP can create the "thumbs.db" file in a read-only network share!)

Thanks for the info, i'll try deleting and recompile.
Deleted, compiled and flashed: every essential function i tested is working. The kitchen is very clean! Many thanks ranju!

Little update of the kitchen
This is a little update of the kitchen:
* Due to the slow response of the phone, dialing/ending tone have been removed
* Update for HTC Task Manager 1.5 (Exclusive apps can be added now)
Please download the zip and copy/replace to the associated folder.
Update: HTC Task Manager cab attached.
http://forum.xda-developers.com/attachment.php?attachmentid=40327&d=1180503183

ranju said:
This is a little update of the kitchen:
* Due to the slow response of the phone, dialing/ending tone have been removed
* Update for HTC Task Manager 1.5 (Exclusive apps can be added now)
Please download the zip and copy/replace to the associated folder.
Click to expand...
Click to collapse
Can you please make a cab of it so that we can install. Dont want to go through re in stalling rom. Appreciate
Or if you can advice the registry entries for both above issues please.

Phone.cab
A cab file for the file in phone.zip is not that difficult since it's just a couple of registry entries.
The other one is more difficult since it also includes files.
So just to help a little, a cab file for the registry stuff in the phone.zip

Actually not that difficult
When comparing the old and new files, I noticed that just the RGU file is different.
Since this is the file with registry settings, I made a quick cab for it.
So not to replace the previous HTC Manager install or anything like that, just to corrent the registry entries.
ps. This and the previous file are not made/reviewed/anything by Ranju, but I've just given them him (her?) name to avoid confusion.

aniel1 said:
Can you please make a cab of it so that we can install. Dont want to go through re in stalling rom. Appreciate
Or if you can advice the registry entries for both above issues please.
Click to expand...
Click to collapse
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\Ending]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\DialPadCtlKey]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
Remove the line in bold above ("Sound"="dpadctl.mid") in the registry and it should like this:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Script"="p"
"Category"="InCallFeedback"
Set the value of "Script" to "apr" and it should like this. It will remove 3s ring delay.
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Script"="apr"
Press the power button (off) after the changes and wait for 10 sec, switch on again and soft reset your device to take the changes in action...

GerardNL said:
When comparing the old and new files, I noticed that just the RGU file is different.
Since this is the file with registry settings, I made a quick cab for it.
So not to replace the previous HTC Manager install or anything like that, just to corrent the registry entries.
ps. This and the previous file are not made/reviewed/anything by Ranju, but I've just given them him (her?) name to avoid confusion.
Click to expand...
Click to collapse
I tried but looks like the cab does not stick the enteries in the registry.Can you give me the registry entries so that i can try to insert them manually. thank you

ranju said:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\Ending]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
[HKEY_CURRENT_USER\ControlPanel\Sounds\DialPadCtlKey]
"Sound"="dpadctl.mid"
"Script"="p"
"Category"="InCallFeedback"
Remove the line in bold above ("Sound"="dpadctl.mid") in the registry and it should like this:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dialing]
"Script"="p"
"Category"="InCallFeedback"
Set the value of "Script" to "apr" and it should like this. It will remove 3s ring delay.
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Script"="apr"
Press the power button (off) after the changes and wait for 10 sec, switch on again and soft reset your device to take the changes in action...
Click to expand...
Click to collapse
thank you ranju. CAn you provide the registry entry for tak manager too, somehow the cab posted above doesnot stick in the registry and i still dont see exclusive/activate please

Third day of use (calls with bt headset/sms/excel) without any problem. Thanks again ranju!

ranju said:
.....
Remove the line in bold above ("Sound"="dpadctl.mid") in the registry and it should like this:
....
Click to expand...
Click to collapse
Mmmm. Removing items from the registry.... Didn't think about that one. So that means that the 2 cabinet files I made will not work.
Back to the drawingboard...

Build my first Rom
I've this ROM kitchen few days back from one of my friends and was simply amazed when I build my first rom.
This is as easy!
Thanks ranju, keep up good work!

How to make visible ExtROM ?

hi, is it possible to make ExtROM visible on Kaiser ?
thx

kamma said:
hi, is it possible to make ExtROM visible on Kaiser ?
thx
Click to expand...
Click to collapse
Seems there is no extended rom in the Kaiser...

Sorry jcespi2005 but one question...
Where's the files that the Kaiser install when there's an hard reset?

jack76 said:
Sorry jcespi2005 but one question...
Where's the files that the Kaiser install when there's an hard reset?
Click to expand...
Click to collapse
Take a look at \Windows and you find the CheckAutoRun.exe and the AutoRun.exe and, of course, the CABs files...
Regards.

re
If you add cab files here will it install them after a hard reset? If not is there a way to do that?
Thanks

datacrime said:
If you add cab files here will it install them after a hard reset? If not is there a way to do that?
Thanks
Click to expand...
Click to collapse
If you make Hard Reset, all the content you copied wiil be lost, so you need to recook a ROM to add content here.

Yes there is NO Ext_Rom in the Kaiser....

Thanks!
But if i'd like to recook a ROM... How i made it?

jack76 said:
But if i'd like to recook a ROM... How i made it?
Click to expand...
Click to collapse
You can't.. Yet...
Give it a few more days and tadzio will get the build process figured out.

jcespi2005 said:
Take a look at \Windows and you find the CheckAutoRun.exe and the AutoRun.exe and, of course, the CABs files...
Regards.
Click to expand...
Click to collapse
is there a config or ini file autorun reads?

you can dump roms at this point just not rebuild them so you could go look for yourself lol.. But it is 3 config files not just one in the Kaiser

My thinking was that you could modify the autorun config files to only load what you want and do a hard reset - if the files are all in the \windows directory and not in extended ROM - would it read the files from there or are they in some secret place?

Once you cook a rom, you can edit the config.txt/preconfig.txt to point to installs anywhere:
CAB:\Storage Card\install.cab
However, you must cook the ROM in order to get changes to the files to stick. If you edit it now, it won't persist after a hard reset.

Kaiser brick

Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk

kfluk said:
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
Click to expand...
Click to collapse
Do you flash the one i send you, or the one you made?
Anyway, put the Kaiser in bootloader mode (you have HardSPL ), and flash WWE ROM you can find in Austinsync sticky thread.
Cheers.

jcespi2005 said:
Do you flash the one i send you, or the one you made?
Anyway, put the Kaiser in bootloader mode (you have HardSPL ), and flash WWE ROM you can find in Austinsync sticky thread.
Cheers.
Click to expand...
Click to collapse
Just found out how to enter bootloader mode.
Both of our ROM I tried to flash. Result is the same.
It seem I am out of luck...
kfluk

Hello jcespi2005,
I flash WWE Cooked ROM and it work fine. I hope Tadzio figure out a way to make CHT ROM work.
Do you think is there something wrong with ROM re-construction the procedure?
kfluk

kfluk said:
Hello jcespi2005,
I flash WWE Cooked ROM and it work fine. I hope Tadzio figure out a way to make CHT ROM work.
Do you think is there something wrong with ROM re-construction the procedure?
kfluk
Click to expand...
Click to collapse
Glad to hear you are on the road again
I'll take down the link to CHT reconstructed ROM for now.
I don't beleave related with the procedure, cause i used to reconstruct the spanish Kaiser ROM, and someone in the thread post about other successfully reconstructed ROM, so perhaps is related to part02.raw itself, but don't know. I sent a message to Tadzio, waiting the answer.
Cheers.

jcespi2005 said:
Glad to hear you are on the road again
I'll take down the link to CHT reconstructed ROM for now.
I don't beleave related with the procedure, cause i used to reconstruct the spanish Kaiser ROM, and someone in the thread post about other successfully reconstructed ROM, so perhaps is related to part02.raw itself, but don't know. I sent a message to Tadzio, waiting the answer.
Cheers.
Click to expand...
Click to collapse
Side track, I found custom method to make WWE OS display CHT lang. Not work well with hardware keyboard. Some of key does not work well.
It cause me have more urgency to return CHT ROM....

kfluk said:
Side track, I found custom method to make WWE OS display CHT lang. Not work well with hardware keyboard. Some of key does not work well.
It cause me have more urgency to return CHT ROM....
Click to expand...
Click to collapse
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!

kekekaka said:
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
Click to expand...
Click to collapse
hello,
I guess this is preload keyboard layout but not key mapping. I need this for another purpose too. thanks.
For key mapping, it looks like exist at HKLM\HARDWARE\DEVICEMAP\KEYBD
kfluk

kekekaka said:
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
Click to expand...
Click to collapse
Can you attach your sym.0404.txt file? you can find in \windows
With this file i can make a CAB...

jcespi2005 said:
Can you attach your sym.0404.txt file? you can find in \windows
With this file i can make a CAB...
Click to expand...
Click to collapse
There is no sym.0404.txt file!
There is only sympad0404.txt!
Anyway, I upload it to you first!

kekekaka said:
There is no sym.0404.txt file!
There is only sympad0404.txt!
Anyway, I upload it to you first!
Click to expand...
Click to collapse
Yes, i view this in the dump folder.
Strange, seems Dopod ROM don't use the same method for the keybd.
Anyway, i attach the CAB to see if works for kfluk in the WWE ROM.
Good luck, i hope.

jcespi2005 said:
Yes, i view this in the dump folder.
Strange, seems Dopod ROM don't use the same method for the keybd.
Anyway, i attach the CAB to see if works for kfluk in the WWE ROM.
Good luck, i hope.
Click to expand...
Click to collapse
Hello jcespi2005,
Before and after install, it seems the same. (I am now use Helmi_Kaiser_1.57.00.03_AKU.0.7.0.Cooked_clean+bigstorage.exe"
no luck until now. Chinese Keyboard has a button call "switch input". This button now mapped to "Tab".
For other button has the following error. (all button said press Fn)
A = _ (original is Tab)
S = " (original is _)
Switch Input = Tab
All other button is ok.
Will switch to other ROM. WWE ROM seems not fit my hardware. Feeling is strange.
** Update: The Switch Input button may be no problem in mapping. I found this button work in word prediction. Just different function in WWE and CHT ROM.
kfluk

kfluk said:
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
Click to expand...
Click to collapse
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng

woohyuksheng said:
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
Click to expand...
Click to collapse
Brick was solved. I just don't know how to enter boot loader mode before.
Thanks for keyboard registry, I will apply it to test.
btw, I found if modify registry key HKLM\MUI change SysLang from 404 to 409 and HKLM\nls change SystemLCID from 404 to 409.
Result will make WM6 can display Chinese and use default English font.
Since apply Chinese font and input to WWE kaiser will cause it use ugly font display english. Furthermore, it cause some menu not display properly too.
the above registry fix it. I found and apply yesterday night and result is good. No side effect until now.
kfluk

woohyuksheng said:
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
Click to expand...
Click to collapse
I modified the key manually. It's work. Can you tell me any tools to create cab or modify ROM package? thanks.

kfluk said:
I modified the key manually. It's work. Can you tell me any tools to create cab or modify ROM package? thanks.
Click to expand...
Click to collapse
For CAB manage, you can use WinCE CAB Manger from http://www.ocpsoftware.com/ and for modify the ROM packages, every package ussually have a .RGU text file with the registry entrys, so you can edit with notepad.
To create packages in this thread you have a little guide...
http://forum.xda-developers.com/showthread.php?t=303195
Cheers.

jcespi2005 said:
For CAB manage, you can use WinCE CAB Manger from http://www.ocpsoftware.com/ and for modify the ROM packages, every package ussually have a .RGU text file with the registry entrys, so you can edit with notepad.
To create packages in this thread you have a little guide...
http://forum.xda-developers.com/showthread.php?t=303195
Cheers.
Click to expand...
Click to collapse
hello jcespi2005,
thanks again for your information. Once HK English ROM available. I will work on it first. Also continue seek for CHT ROM issue solution.
I found voice recognizer in CHT ROM is much better than WWE. Since it does not require training and able to use immediately.
kfluk

how do u remove an installed cab files?

i recently install a cab file which i dislike. how do i remove it from my magician?

Remove Programs Dude!!
ted1303 said:
i recently install a cab file which i dislike. how do i remove it from my magician?
Click to expand...
Click to collapse
Go to Start -> Settings -> System -> Remove Programs
It will display a list of all the programs installed in your Magician.
Select the one you want to uninstall and Press *UNINSTALL*
Thats too simple I guess!!

i mean the cab files thats installed tru the extended roms. cos recently i did the big storage hack. then i installed one cab files from the extended rom which i dun like n wish to delete it. so how do i do it? anyway thanks for ur reply n help dude...

ted1303 said:
i mean the cab files thats installed tru the extended roms. cos recently i did the big storage hack. then i installed one cab files from the extended rom which i dun like n wish to delete it. so how do i do it? anyway thanks for ur reply n help dude...
Click to expand...
Click to collapse
If you have done the BigStorage Hack and "installed" the application later on, it should be there in the Remove Programs list because the BigStorage hack simply nullifies the concept of ExtRom. If you can't find the program, you can tell me which one is it, and I will try to figure it out.

( Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.Cab ) this is the one which i wish to remove.... and maybe u can tel me which cab is for changing themes too?

( Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.Cab ) this is the one which i wish to remove.... and maybe u can tel me which cab is for changing themes too?

ted1303 said:
( Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.Cab ) this is the one which i wish to remove.... and maybe u can tel me which cab is for changing themes too?
Click to expand...
Click to collapse
Themes come from .tsk files rather than .cab files. And about Camera Wizard.cab, it actually changes some registry values. Nothing else. Its not an application installer.