Related
Hello friends, this is my first post in prophet forum, though I had been a ppc user for more than 2 years. 5 months back, I bought an O2 XDA Neo, which was loaded with a dopod rom, with numbers coming up as 2.09.001 etc during startup. Shortly after purchase, I flashed with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship rom. Everything went on well, and I was using the phone without problems for the past 2 - 3 months. Well not exactly without problems, some times when I reset the phone, it gets stuck at the spl, ipl screen, and I have to reset again many times to get it to load windows. I initially thought the problem may be due to the battery not being charged fully, but later I found that battery charge is not the problem, as the phone not booting became more and more common even with a fully charged battery. Even when I managed to get the phone started after repeated and frustrating soft resets, I started to get corrupt PIM data, like the contacts and calendar applications not starting up. ALso strange folders with name y? and y?? appeared in the phone memory. THese folders could be deleted only with Resco Explorer. Also the bluetooth was not working properly, that is when I turn it on using the comm manager, the blue tooth icon gets activated but actually no bluetooth is turned on. Later after a soft reset, bluetooth turns on but now the icon in comm manager is not activated. I did a hard reset a couple of times thinking that this problem will be rectified, but all the problems continued.
Going through the forum i read some where that JAMin_WWE_213923_2139123_022021_ship was one of the most stable roms for this phone, so I set about flashing this rom. I used ROMUpdateUtility-NoVendorID and the update went on till 95 % when it showed error 326. I tried again, with the same result. I later flashed RUU_Prophet_220734_2207114_024721_QtekWWE_Ship back, and the phone is working as before.
NOw I would like to get the following problems corrected
1. Phone getting stuck at ipl, spl, gsm screen
2. Proper working of bluetooth as I would like to use it with my BLueant Supertooth II
WHat will be the correct these prolems ? will the imate rom correct these problems, if so how am I to go about loading it ? or is there a better one than what I am having now ? or is it a HARDWARE problem ?
I am very sorry for this extremely long post, but I felt if I said all my problems in one post, I would get better response.
PLease help....
You should have stayed with the RUU_Prophet_220734_2207114_024721_QtekWWE_Ship ROM from the beginning, since it's the best and also latest official Prophet ROM. It's a 2.20 ROM which is the latest available.
GAMBIT999 said:
You should have stayed with the RUU_Prophet_220734_2207114_024721_QtekWWE_Ship ROM from the beginning, since it's the best and also latest official Prophet ROM. It's a 2.20 ROM which is the latest available.
Click to expand...
Click to collapse
I am still with that ROM. It is with this ROM that my prophet is causing the above problems.
Can you guys advice me how to load JAMin_WWE_213923_2139123_022021_ship rom with out this error 326 showing up ?
HI. I´d love to have the s730 HTC home screen on my Vox. Does anybody know where could I get it?
Thx
Ditto that! I also have a 710 and would like the 730 homescreen/theme
Same here
We have tried to use the extracted files posted here earlier but it seems there is bunch of stuff missing...
Any new extraction or guidance would be helpful as well
The file posted here can be extracted : http://forum.xda-developers.com/showpost.php?p=1732690&postcount=4
I've been able to use HTC homescreen on my vox but I can't get some things to work like the favorite people application and the weather part... In fact only the clock works
Unfortunately I don't have time to look further into it, but it shouldn't be too difficult for the geniuses out there
wont spb mobile shell give a similar home screen?
Isn't it only for pocket pcs ?
It´s done.
HTC Home Screen for HTC Vox :
Found in this Forum under HTC Tornado. Works fine on my VOX. Be sure to install to the device!!! when you install it to SD Card Phone crashes at boot.
Thank you very much Gregory for this great theme.
Truplaya
Edit: Seems the phone sometimes crashes when you insert the sd card. without sd card it boots fine... Maybe someone knows why and can fix this error...
Before downloading you have to notice that this cab can cause a crash and you have to hard reset the phone.
Gah. A hard reset is now needed all because of that cab above this post.
Total crash, stuck in reboot cycle.
A warning to others.
(installed to device, not storage card of course)
Update: Seems that the cab did something to the phone's MicroSD support. Or something. I can boot the phone without having the storage card inserted. Any idea what may have been changed? I'm guessing something in the registry, but not sure really.
Same problem to me schlinkey. But i can boot without sd card and insert it when booted. I added a notice above about the problem. Sorry that you had to hardreset your phone.
Did the Plugin worked for you when you boot without sd card?
I can take some screens of my phone (Vox) with HTC Plugin tommorow if wanted.
Took some pictures this morning.
It's alright, a hardreset now and then keeps the phone running smoothly
When I managed to boot the phone (without having the SD inserted) I uninstalled the plugin. The error remained however, so ended up with a hardreset anyway
All working again now!
Got it installed on my Vox now, currently uninstalling look alike themes and stuff that I no longer use to free up space on my phone now. Thanks for getting the New HTC Theme to work on the Vox. Just ned to get weather plugin working now. I've also got an annoying problem where my Vox with my T-Mobile Sim in says that I am Roming and the carrier plugin says thatI am connected to T-Mobile UK. I'm in the UK and using a T-Mobile UK Sim.
Roland
No problem with the Home screen, but I have had the reboot problem with the SD card for ages.
I did manage to get it to boot with the SD card in by doing various things.
When I first had the problem switching to flight mode before a reboot fixed the problem. The after installing some software it would only reboot with the SD card in if I first ran SK tools to clear duplicates in the notification list and selected a home screen which did not access the SD card (including the MRU list) such as "Windows Simple".
When I installed the Office 6.1 update the problem appeard to go away.
Then I installed Facade and so far have not managed to get it to boot with the SD card inserted.
I guess I could uninstall Facade - but I want to use it.
A Hard Reset is too drastic and I don't want to try that - easier to remove the SD card than to spend all day re-installing everything on my phone - no gurantee it will work anyway.
I suspect its a problem with the SD card driver as I have read that later ROM versions fixed the problem.
wizgnome said:
easier to remove the SD card than to spend all day re-installing everything on my phone - no gurantee it will work anyway.
Click to expand...
Click to collapse
Sounds like you need Sprite Backup 6
Gunde said:
Sounds like you need Sprite Backup 6
Click to expand...
Click to collapse
I thought about that - not tried it - I assume it would back up all the registry settings along with the files.
But if I do a restore, I assume it would be back as it was before the hard reset, including the cause of any problem.
Although I suppose it might allow for some experimentation, with the ability to put things back to how they were before any changes were made.
Can someone who has used it give some comments on how useful sprite would be in these circumstances.
Hi all! Has anyone experienced the "My People" application stopping working after a while? After I installed it, it worked shortly, but now when I try to open it, the list flashes quickly, then disappears. This is from both the Home screen, and through the Start Menu. This has happened both times I've installed it. Any ideas?
Thanks!
ssorrell
Just now installed on my S620 Excalibur and seems to work ok.
John
And my home screen ;D
http://www.e650.zafriko.pl/kat/tuning__d
and how quick is you home screen with that smart toolkit and 3d menu ? bacause i got it before and it`s really slow !! I love this HTC 730 homeS .
those are all files wichout 3D menu and work good lake wihout "tuning"
but keylock need lock from pres key profiles/off display and select keylock if u use difrend keys to keylock or methods 3D menu god/off and need run again its bug affter instal smatoolkid ;/
enjoin ;D
*now i use smartoolkit RC.0.0.0.9 and settings:
in general first are all disable wihout run on startup and show's txt... and second row its disable then smartoolkit wen pres home button show and hide
Ps. sorry for my eng;/
i have the HTC 5800 and when i try to install this i get a message about not having sufficient privledges.
Any ideas?
After I tried to upgrade the rom to WM6, my JAMin got stuck at bootloader. After that, I tried to flash WM5 roms without success and suddenly (after a reset) the screen became white with some horizontal and vertical lines constantly moving. I discovered that it was only the screen that was garbled as it still connected to PC, so I installed (without seeing anything on my JAMin) the NVID ROM trying to restore it. It installed sucessfully, but the screen remained garbled with the white background and random lines. I know it was sucessfully installed because I heard the typical "welcome" sound before configuration.
Do you know any way to restore the screen? Or must I send it to I-Mate to repair?
You can try and reattach the screen cable to the rest of the device, but this will boid any warranty you have, and may damage your device further. If the device is under warranty, I would suggest flashing the ROM the device came with (unfortunately the FTP server is down at the moment, so it might take some fishing around for) and sending the device back to get repaired properly.
mpmf said:
After I tried to upgrade the rom to WM6, my JAMin got stuck at bootloader. After that, I tried to flash WM5 roms without success and suddenly (after a reset) the screen became white with some horizontal and vertical lines constantly moving. I discovered that it was only the screen that was garbled as it still connected to PC, so I installed (without seeing anything on my JAMin) the NVID ROM trying to restore it. It installed sucessfully, but the screen remained garbled with the white background and random lines. I know it was sucessfully installed because I heard the typical "welcome" sound before configuration.
Do you know any way to restore the screen? Or must I send it to I-Mate to repair?
Click to expand...
Click to collapse
Hi frd,
I have exactly the same problem!
Nothing , only the f*** white screen!
I can browse the device via active sync, can rcv calls but the white screen.
I have checked the ribbon connector of the LCD and make reflashing some ROMs but nothing.
I still wondering is it hardware or software problem!
Please let me know if you have progress!
Thanks
G.
Try to replace LCD module, I think thats right way.
It will be a hard ware problem. Probably the ribbon cable as the screen is showing something so it must be working at least a bit.
Hello,
i have the same Problem with my QTEK S200.
First i changed the Rom and it worked perfectly for two days.
Then i had to change my Sim card and after that the problem came again.
I tryed a lot of times to reflash the rom but the problem persist.
How can it be that it worked again for some days ?!
is it the touchscreen of the lcd unit i have to replace ?
is it possible to do it by my self ?
thanks for your help !
Hi everyone.
I had a similar problem an hour ago (Qtek S200 G3):
I Upgraded to a 6.1 rom and then to another, after that my device was stuck in bootloader(3 colour screen). Any 6.1 rom that I tried would install, but after installation device always boot in to the 3 colour screen.
I tried this original shipped rom http://files.mail.ru/HZUAH1 (it's WorldWidwEnglish) (to download just click the link "скачать" or the file name RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
) and it installed!!! It TAKES A WHILE TO INSTALL!!! But it worked!!!
May want to try it.
Hope this helps.
hello,
picture on screen was immediatly clean again ( bootload image ).
it was impossible to change the rom because i have a G4 model.
i flashed the rom with another french rom for G4 and it worked perfekt.
now i tried to remove the battery again for 3 seconds and now i have the same problem again. really strange ....
i tryed the same procedure again but no success.
I reinstalled differents rom's again starting always installation from bootloader.
After about 10 new installations i've clean picture again.
now i'll not put off, restart, or take of battery till one of you know what's the problem.
Thank you for your help !!
are you guys sure its not an intermitant hardware problem, it sounds like it to me. if yu were able to get a clean picture for a short time and now its white again, it cannot be the rom? As for replacing it, nothing is impossible and there is always ebay and google
QTEK S200 G4 CID unlock
How can I CID unlock a device that need´s that to upgrade the Rom?
Is there already any program that , Lockwiz dont do the job, can performe the unlock?
Thank you.
For G4 CID unlocking, you need to user Hard/Soft SPL.
same problem
my imate jamin got the same problem. it happens only and only when I remove the battery and when I leave it to charge for 1-2 days the LCD works again and show clear pic. any suggestion? activesync and &... are all ok!
Well, i upgraded to windows Mobile 6, but haven't removed the batterie anymore.
But i'm able to put it off now, what was impossible before.
Hi. Looks like Treo 750 forums are almost dead nowadays. But if someone can point me out in the right direction I'll really appreciate it.
I have a Treo 750, it came with WM5, I updated it to WM6 around a year ago. I did an official update, the one we were able to get from the Palm website. I've been very unhappy with it lately. Even after some hard resets, the thing is just slow sometimes, and I would just like to try one of those cooked ROM and see if I can get a some performance improvement, small or not.
So, I found this rom: http://forum.xda-developers.com/showthread.php?t=345748
The thread was posted a long time ago so it might be old. If you can point out to newer and/or better cooked/lite roms, thanks .
So, anyway, first step according to everyone is to install HardSPL. And this is as far as I can go. I'm using CheetahUnlocker.exe found in these boards. I put my treo in bootloader mode, then run CheetahUnlocker. Start step 1. But when it is trying to the update, where you see the progress bar, it goes straight to 100%, and then it fails with an error message 207, saying that the image is corrupted. The Treo itself reboots back to the OS.
I've been reading and reading for hours and I haven't been able to do this. I even follow some steps regarding Vista drivers, but that didn't work either. I tried it in XP at work and it didn't work. I always get the same error. I'm seriously lost and I would really like to try a lite ROM.
Is there any other way I can try to install hard spl? Can it be installed via the SD card method. Also, I could just go ahead and install the cooked rom via the SD card method but I wouldn't like to risk my phone that way.
When I reset my phone with the Media button pressed, first I get the tri-color screen for less than 1 sec, then I get a gray window with blue letters that says "Loading" for a few secs, and then I'm back to the try color screen that says:
"Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000"
Any ideas? Please I really need help.
No one? I really need help flashing the HardSPL. I thought about trying to install the hardspl via SD, but I read it wouldn't work. Any ideas?
hi, do you format the SD in FAT32 and 512 bytes in your PC??? you must do this before copy de cheeimg.nbh file to SD.
not sure if this is too late but mine was doing the same thing. I switched to a lower capacity SD card and it worked fine. 2GB or less.
I have the same problem, just the 3 collor screen...nothing else. Any ideas??? Please...
Hy,
I ve got the problem that suddenly my TP shows unusually hanging after a few minutes playing around. If i do a softreset then it hangs on the splash screen and nothing happens. I can do a hr then and the same story begins. After tast appeared i flashed some other roms to be sure that its not depending from the rom. Also i restored different backups, with all its the same... i fear that a part of the memory is defect ... Any ideas how to test the memory or other suggestions? thx in advance.... i dont want to use my microwave
Greetz
Boris
Did this happen suddenly or did you do something before it happened (eg install something, etc)?
Mine just today won't turn on, I had it off all day and now it just sits on the splash screen.
Trying some things, if I figure anything out I'll let you know.
No, i didnt do anything special today or yesterday, but a week ago i set it up completly new, cause i had equal problems.... to set it up completly new with all progs and cosmetic "operations" costs me nearly one week so i dont want to do it again ...
If i find a way to solve, i will post here too
Greetz
Boris
I flashed EnergyROM (booted into the tricolor screen by holding down Power and Volume Down), and it seems to be working.
Youre the lucky one, congrats...
I have a similar problem. The only change/new install is the updated version of Microsoft MyPhone. Now my TP will not connect to my telephone provider: T-Mobile. It just tries and tries but never connects.
Also, sometimes when I try to open any program, I get the error message that the certificate cannot be read. a soft reset fixes this but this problem is driving me crazy.
Is this another Microsoft update ****up?
same here: today more than 3 times problems with certificate or similar message ... thinking of the last timebomb in my old romeos rom ... was no fun..
Borisku,
Are you running Microsoft MyPhone? If so, did you do the software update within the past 4 days?
i do, but i didnt update ... ??? This morning my TP hung again, and i tried to sr it.... seemed to work until tp vibrates 3 times and then nothing anymore, no screen, no button, nothing
.... took out battery, left it out for 30 minutes, then i could HR again and restore my backup... since then no problems.... do you think it could run too long, getting too hot or something like this??
Greetz
Boris..
Edit: was too fast just 1 minute after i wrote that, tp hangs while in connection to active sync.... hr now, will test how it runs with pure romeos2 for 2 days now... rport follows
Edit II: The last days i always flashed from SD Card... i will now try to flash ROMEoS2 from PC ... maybe theres a difference, especially cause the text at the end of flashing from SD was confused. there were mor than one words at one place one the screen, and i found i typing on the screen RaphSimg.nbh, although the file is named as usual raphimg.nbh (without the "s" in the centre...)
I hope i m not too early: i think i solved the prob, maybe that helps somebody & prevents a tp from ending in a microwave
in preparing to bury my tp in the microwave i flashed back to the german stock rom or - correct - to the official update that can be loaded from the HTC Homepage; it contains not only the Rom but also radio & Splash Screen. I flashed it to my tp and was prepared to undo Hard SPL, but it gave it a chance.... and it ran like a VW beetle, flashed back to ROMeOS2, it runs.... i will wait till tomorrow & hope that it will not change to freeze or change clock Font colour partly as it did before...
Hope it will help somebody...
Greetz
Boris
Edit: its now 14th of december and it runs like a charm... seems like the failure is gone through flashing to stock ROM & then flashing ROMeOS again
Still is okay ...