my digitizer broken , i upgrade my WM ce to WM2005 to finalize the instalation i have to tab the screen, solution came that i can connect my mobile through a remote controller SW then to finish the screen alignment but to finish this installation i have to tab ok for the message appears on the mobile while fininshing the installation witch i cant see but i know that if i can tab on ok it will be installed accordingly i need button.exe of wm2005 to get rid of this delema any help
Related
hi, i am a newbie to the xda's and this is the problem i have, using xda2 on 02 rom ver 1.72, radio ver 1.17. i have no problem connecting to laptop SO xp pro, but when i try to install a new programe to it, it starts to load and then tries to open add or remove programme then stops the installation.if i try to open add or remove programme in active sync on the laptop it fails to open and i get error message telling me to disconnect from cradle and try again. if anyone has any idea's i would be glad to hear them thanks :evil:
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
I'm trying to upgrade my I-mate Jamin (G3)
I followed this guide :
http://forum.xda-developers.com/showthread.php?t=310452
The first 5 steps went successful, and I've tried installing multiple ROM's like :
Transformer 1.1
Touch VII
and both ROMs are giving me same error on command prompt ( although in the end it comes as successful upgrade ) and this popup of "SUCCESS" comes on my device while upgrading.
the error i'm getting on command prompt i'm getting is :
Writing the new CrossBow OS Rom ...
Copying C:\Downlo~2\itsutils.dll to WEC:\windows\ItsUtils.dll
could not update Itsutils.dll to the current version, maybe it is inuse ?
try restarting your device, or your active sync.
then that Congratulations msg comes up ~~
I hard reset my device and I'm still on Windows mobile 5
I'm a NOB please help .. tell me what I'm doing wrong ??
Thx.
-Download again all the .zip's from web to the desktop and extract all to desktop again
-disable antivirus and firewall
-run pvtemp.exe(choosse between g3 and g4 depending of your mobile model)
then run the update.bat
it works with me
I think i'm a bigger noob
i didnt unlock CID anyways figured it out .. just installed Transformers 1.1
thx
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help
hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (
do not use olydb
just when the healthy ppc restarted replace it with zick quickly.
use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..
What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!
Hello there,
I download from the site ,the update for windows 6.5 ,for my lolite but i have a problem here...
Everything normal but when the load bar appears to my phone, i hear a sound from pc like "loosing" connection from the USB . And then the updater on my PC screen inform me about an ERROR connection...Why i cant establish a connection between them ?
Can someone help me please ?
Thank you anyway ,
Have fun !!
The name on the ERROR might help
The ERROR is 262 UPDATE ERROR
[]...Communication error during the process....[]
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Iolite
Also in Iolite section you´ll be able to find more help
Good luck,
which rom did you use?