Database Info

Unable to install Tomtom5 upgrade onto a MDA Pro

I have a MDA Pro running WM2005 and everytime I try and install TOMTOM I get the error shown in the attachment and the software shuts down. I am using Activesync 4 for the connection
Thanks

I don't get exactly the same error but the setup also fails for me.
To get round the problem just copy the .cab and .ini files directly to your memory card then run each of the installs manually.
Worked for me.....

Cant connet to Activesync on WM5 with USB

hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?

Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.

ok, will have a try.. thx so much :wink:

link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist

Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !

i got same problems right now, any one help us please

I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks

Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!

ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.

ROM in XDA mini corrupted--HELP!!

i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.

Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M

sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.

http://wiki.xda-developers.com/index.php?pagename=HTC_Magician

thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc

taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M

Noob Question Need Help

Please dont get mad i looked every where to see if this had already been posted. When i run Hard-SPL I keep geting to 260 error it starts just fine asks me if i will grant access to the application which i do and it starts to do its thing but then halts and i get the 260 error and it dose not go any farther any suggestions?

did you remove your sim and sd card?
In addition, if you have not removed them back up your data. Then do a hard reset. Then remove sim and sd card. It maybe an open port problem so restart your computer as well. Hope this helps.

tried
Gave that a try after it asks if it is alright to load the file on my phone it auto resets phone then 260 error happening again im on vista 64 bit and even tried what the main website said for vista users but half the guide dose not really apply so im not sure what to do or what im doing wrong. any more suggestions?

Need Help
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!

sorry i couldn't help you i always thought a 260 error was due to open connections or ports.
When you downloaded the zip file for hardspl did you use vista's unzip?
If so you may get an error because vistas unzip program sucks ass and you need to use another application to unzip the hardspl software.

crazigamer said:
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
Click to expand...
Click to collapse
Did you go through the connection settings in the mobile device manager and disable usb connections?

Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
This advice is thanks to tochill. Try this and see if it works. Vista often does not automatically load the drivers. I used Vista 64 to flash without a problem. It was a little tricky to get it to load the drivers at first but after they are loaded you should be fine. If it doesn't work let me know and I will see if I can find the drivers for it.

Also make sure you have the most updated version of Windows mobile device center.

not sure what to do
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol

update ur drivers if ur using vista
for me vista was a pain to flash so i just use my desktop which is xp and its happy flashing for me all the way...piece of cake now after u do it a few times

crazigamer said:
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
Click to expand...
Click to collapse
Before you connect your phone.

You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723

Even tried xp
I have even tried using XP I still get the same outcome my phone auto restarts after I tell it to run the program. What am I doing wrong? I am suppose to run the main file off of my PC not the phone correct? and just go trough the setup?
Can some one tell me how they did it step by step because I have followed the instructions on the HARDSPL main thread and it dose not work. And so I am correct this will work with the new ATT Tilt right?

tried all of that still dose not work any other vista run arounds? God i wish i still had my xp discs

Please feel free to message me on aim username is kl3pto really could use some help.

GSLEON3 said:
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Click to expand...
Click to collapse
Thanks that was a thread I was looking for to post to the OP as the next step. I have had to reinstall vista 5 times and each 5 times had to do something different to get it to work.

NP, I also suggest with Vista, you flash HardSPL via Jump. Don't flash ROM's or Radios with JumpSPL, but with the 1.93 SPL, I have tons more success using the Flash HardSPL method than the .exe

manage messages

Hello friends....
I m unable to use "Efficasoft Mobile Express". I have latest version 1.5.1 but when ever i connect my cell phone samsung i900 [omnia] a error comes saying "Initialize RAPI failed".
What to do??
Do i need to install some file in my omnia also???
I want to manage my contacts and especially my 'messages' though my computer......Is there any other alternative available??
Regards

I use Jeyo Mobile Companion to manage my messages from the PC

corefirewire said:
Hello friends....
I m unable to use "Efficasoft Mobile Express". I have latest version 1.5.1 but when ever i connect my cell phone samsung i900 [omnia] a error comes saying "Initialize RAPI failed".
What to do??
Do i need to install some file in my omnia also???
I want to manage my contacts and especially my 'messages' though my computer......Is there any other alternative available??
Regards
Click to expand...
Click to collapse
I get the same error, though it did used to work! So something I have installed is obviously conflicting with it.

Solution:
I get this error when I had advanced network functonality disabled.
If its disabled USB uses some other connection. But Efficasoft Mobile Express needs RAPI connection. So you need to enable this in settings but I know that it causes sometimes problems with ActiveSync.

let me try this solution.....currently new version is out i.e 1.5.2.
let see if this version works fine !!!

anyway as deedee said... Jeyo's app works perfectly.. on XP and Vista.. on Outlook 2007.

KouzelniCZech said:
Solution:
I get this error when I had advanced network functonality disabled.
If its disabled USB uses some other connection. But Efficasoft Mobile Express needs RAPI connection. So you need to enable this in settings but I know that it causes sometimes problems with ActiveSync.
Click to expand...
Click to collapse
hey!!
can u plz tel me how to apply ur solution.....i am not getting it and what is this RAPI connection failed error??

if you use MyMobiler herewith, there is a problem. Quit MyMobiler on your phone.

Same problem
I had the same problem. What I did was, first wait until activesync finished all its tasks and then start the application on my desktop. After that it should work, you must assure that the program, which is installed on your device is running too. I'm using version 1.5.2 Build4380 and it works fine with my diamond.

Please close this thread its very very old.
Thanks for all the help